2007 ISUZU KB P190 parking brake

CAB 10-29


Important Operations
1. Front Console Assembly • Refer to Floor Consol in this section.



RTW 6A0SH000101

2. Glove Box
• Remove 2 fixing screws and pull on the handle.




RTW 6A0SH000201

3. Instrument Panel Driver Lower Cover Assembly
1) Remove the engine hood opener 2 fixing screws.
2) Remove the lower cover one fixing screw.
3) Pull out the cover (Stick type parking brake only).
4) Pull out the lower cover assembly.


4. Driver Knee Bolster Assembly
• Remove 4 fixing bolts.
Caution:
For precautions on installation or removal of the SRS-air
bag system, refer to section 9 “Supplemental Restraint
System (SRS) - AIR BAG”
5. Driver Air Bag
6. Steering Wheel/Steering Cowl • Refer to Section 3B “STEERING COLUMN” for steering
lock assembly removal steps.



7. Meter Cluster Assembly
• Pull out the 4 clip positions.


BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007

10-30 CAB

RUW 5A0SH002701

12. Instrument Panel Assembly & Cross Beam
1) Remove the two bolts fixing the steering column to the cross beam and the two bolts fixing the brake pedal
bracket to the cross beam.

2) Remove the two bolts fixing the parking brake bracket to
the cross beam (Stick type parking brake only).


3) Disconnect the control cables at the blower unit and vent
unit.
4) Remove the fasteners fixing the instrument panel and cross beam assembly and the body panel.
5) Disconnect the instrument harness connectors.



This illustration is based on RHD model
RTW 7A0SF000201

BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007

10-34 CAB
Important Operations
17. Instrument Panel Assembly & Cross Beam 1) Tighten the 4 bolts fixing the cross beam and body panel to the specified torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
19 (1.9/14)

RUW 5A0SH002801
2) A Bolt: Steering Column to Cross Beam
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
20 (2.0/14)
B Bolt: Pedal Bracket to Cross Beam
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
15 (1.5/11)

3) C Bolt: Parking Brake Bracket to Cross Beam
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
15 (1.5/11)

23. Steering Wheel/Steering Cowl • Tighten the steering wheel fixing nut to the specified
torque.
Torque N ⋅m (kgf ⋅m/lb ⋅ft)
34 (3.5/25)




BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007