2007 HONDA ACCORD Owners Manual

Page 177 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Push down on the key while you 
pressthereleasebuttononthe
shif t lever and move the shif t lever
out of Park to neutral.
Remove the key from the shift
lo c k release slo t, then reinstall
thecover.Ma

Page 178 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Always use the parking brake when 
you park your vehicle. Make sure
the parking brake is set f irmly, or
your vehicle may roll if it is parked
on an incline. 
If your vehicle has an automatic 
transmi

Page 179 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Your vehicle is equipped with disc 
brakes. The brakes on the rear
wheels may be disc or drum,
depending on the model. A power
assist helps reduce the ef f ort needed
on the brake pedal. The ABS helps

Page 180 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual If this indicator comes on, the anti- 
lock f unction of the braking system
has shut down. The brakes still work
like a conventional system, but
without anti-lock. You should have
your dealer inspect

Page 181 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Test your brakes as instructed on 
page . If the brakes f eel normal,
drive slowly and have your vehicle
repaired by your dealer as soon as
possible. Avoid sudden hard braking
which could cause the re

Page 182 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual The vehicle stability assist (VSA) 
system helps to stabilize the vehicle
during cornering if the vehicle turns
more or less than desired. It also
assists you in maintaining traction
while acceleratin

Page 183 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Driving with varying tire or wheel 
sizes may cause the VSA to
malf unction. When replacing tires,
make sure they are of the same size
and type as your original tires (see
page ). 
Deactivate the VSA

Page 184 of 292

HONDA ACCORD 2007 CL7 / 7.G Owners Manual Your vehicle has been designed 
primarily to carry passengers and
their cargo. You can also use it to
tow a trailer if you caref ully observe
the load limits, use the proper
equipment, and f ollow the