2007 FORD FIESTA table

21 1-02-8 Power Steering 21 1-02-8
REMOVAL AND INSTALLATION
Power Steering Pump - 1.25L Duratec-I 6V (Sigma)/l.4L
Duratec-16V (Sigma)/l.GL Duratec-16V (Sigma), Vehicles (
Without: Air Conditioning(l3 434 0)
Expander, Teflon Seal
211-188 (13-015)
Allow the fluid to drain into a suitable
container.
622 3. Using the special tool, disconnect the power
Wrench, Hydraulic Line Union
"-269 (13-027)
Removal
Removerllnstaller, Hose
I. Remove the accessory drive belt. steering
fluid supply hose from the power
steering pump.
For additional information, refer to:
Accessory Drive Belt
- 1.4L Duratec-I 6V
(Sigma)ll .6L Duratec-1 6V (Sigma), Vehicles
Without: Air Conditioning
(303-05
Accessory Drive, Removal and Installation).
2. Disconnect the power steering fluid reservoir
return hose quick release coupling, from
either the power steering fluid cooler or the
Allow the fluid to drain into a suitable
container.
I
, 4m ACAUTION:D~ not disconnect the power
steering pump pressure adapter from the
power steering pump.
power steering reservoir return hose. Using
the special tool, disconnect the power
1. Press the power steering fluid reservoir return steering line from the power steering pump
hose quick release coupling locking tangs. pressure adapter.
2. Disconnect the power steering fluid reservoir Allow the fluid to drain into a suitable
return hose quick release coupling. container.
2006.0 Fiesta 1212006 ~397031 en
procarmanuals.com

21 1-02-1 0 Power Steering 21 1-02-1 0
REMOVAL AND INSTALLATION
Power Steering Pump - 2.OL Duratec-HE (M14)
f
I I Remover, Power Steering I
1 I Installer, Camshaft Pulley 1
7 I Removerllnstaller, Cooling I
1. Remove the right-hand headlamp assembly.
For additional information, refer to:
Headlamp Assembly (41 7-01 Exterior
Lighting, Removal and Installation).
2. Remove the accessory drive belt.
For additional information, refer to:
Accessory Drive Belt
- 2.OL Duratec-HE
(M14) (303-05 Accessory Drive, Removal
and Installation).
I
3. Detach the power steering pump to steering
, gear pressure line from the intake manifold. I
1 4. Lower the vehicle.
5. Remove the components in the order
indicated in the following
illustration(s) and
table(s).
2006.0 Fiesta 1212006 G428496en
procarmanuals.com

21 1-02-1 5 Power Steering 211-02-15
REMOVAL AND INSTALLATION
Allow the fluid to drain into a suitable Detach the power steering line from the
container. steering gear.
Discard the O-ring seal.
I
Right-hand drive vehicles 6. Disconnect the power steering pressure
(PSP) switch electrical connector. 9. N0TE:Note the position of the power steering
line to aid installation.
Detach the power steering line from the
steering gear.
Left-hand drive vehicles
7. Detach the steering gear return hose from - -
the pressure line. All vehicles
8. N0TE:Note the position of the power steering
line to aid installation.
10. Disconnect the power steering lines from
the steering gear valve body.
1. Remove the retaining bolt.
2. Rotate the clamp plate.
Allow the fluid to drain into a suitable
container.
2006.0 Fiesta 1212006 G91965en
procarmanuals.com

21 I -02-1 7 Power Steering 211 -02-1 7
REMOVAL AND INSTALLATION
Power Steering Pump to Steering Gear Pressure Line - 1.25L
' . I Duratec-1 6V (Sigma)/l.4L Duratec-1 6V (Sigma)/l .6L
Duratec-1
6V (Sigma), Vehicles Without: Air
Conditioning(l3 440 0)
Special Tool(s)
Expander, Teflon Seal
211-188 (13-015)
( :Removal
Vehicles with manual transaxle
622
Detach the power steering line brackets from
the transaxle.
Socket, Hydraulic Line Union
!:!-269 (I 3-027)
All vehicles
3. Raise and support the vehicle.
For additional information, refer to: Jacking
(100-02 Jacking and Lifting, Description
and Operation)
I. N0TE:Note the position of the power steering I Lifting (100-02 Jacking and Lifting,
line to aid installation. Description
and Operation).
Detach the power steering line bracket from
4m ACAUTION:D~ not disconnect the power
the transaxle. steering
pump pressure adapter from the
power steering pump.
Vehicles with automatic transaxle
2. N0TE:Note the position of the power steering
line to aid installation. Using
the special tool, disconnect the power
steering line from the power steering pump
pressure adapter.
Allow the fluid to drain into a suitable
container.
Discard the O-ring seal.
-- -- -
2006.0 Fiesta 1212006 G397028en
procarmanuals.com

21 1-02-1 8 Power Steering 21 1-02-1 8
REMOVAL AND INSTALLATION
5. N0TE:Note the position of the power steering
line to aid installation.
Detach the power steering line bracket from
the engine block.
I
Detach the power steering line bracket from
the steering gear.
/-.
Right-hand drive vehicles
9. N0TE:Note the position of the power steering
6. Disconnect the power steering pressure line to aid installation.
(PSP) switch electrical connector.
Detach the power steering line bracket from
the steering gear.
Left-hand drive vehicles
7. Detach the steering gear return hose from
the pressure line.
8. N0TE:Note the position of the power steering
line to aid installation.
All vehicles
10. Disconnect the power steering lines from
the steering gear valve body.
1. Remove the retaining bolt.
2. Rotate the clamp plate.
Allow the fluid to drain into a suitable
container.
2006.0 Fiesta 1212006 G397028en
procarmanuals.com

21 1-02-21 Power Steering 21 1-02-21
REMOVAL AND INSTALLATION
Centralize the steering and lock it in position. Remove and discard the steering column
shaft to steering gear pinion retaining bolt.
6. Detach the steering column shaft from the
steering gear pinion. 7. Remove the accessory drive belt.
For additional information, refer to:
Accessory Drive Belt
- 2.OL Duratec-HE
(M14) (303-05 Accessory Drive, Removal
and Installation).
8. Lower the vehicle.
9. Remove the components in the order
indicated in the following
illustration(s) and
table(s).
2006.0 Fiesta 1212006 G458165en
procarmanuals.com

21 1 -02-30 Power Steering 21 1 -02-30
REMOVAL AND INSTALLATION
Steering Gear to Power Steering Fluid Reservoir Return Line -
2.OL Duratec-HE (M14) RHD (' ,
Centralize the steering and lock it in position. table(s).
Special Tool(s)
2006.0 Fiesta 1212006 G458167en
2. Detach the steering column shaft from the
steering gear pinion.
Discard the steering column shaft to steering
gear pinion retaining bolt.
Pp
205524
24003
Alignment Pins, Subframe
205-524
Removerllnstaller, Hose
Clamp
303-397
General Equipment
Transmission jack 3. Remove the front wheels and tires.
Materials For
additional information, refer to: Wheel
and Tire (204-04 Wheels and Tires, Removal
Name Specification and Installation).
4. Lower the vehicle.
Grease
1. N0TE:Make sure that the road wheels are in 5. Remove the components in the order
the straight ahead position.
indicated in the following illustration(s) and
SA-M 1 C9107-A
procarmanuals.com

21 1 -02-38 Power Steering 21 1 -02-38
REMOVAL AND INSTALLATION
Steering Gear(l3 11 6 0)
I I Separator, Ball Joint Discard
the retaining bolt.

3. Remove the wheels and tires.
I I I For additional information, refer to: Wheel I I I
General Equipment I I
and Tire (204-04 Wheels and Tires, Removal
and Installation).
Removal
All vehicles
Transmission jack 1 4. Disconnect the power steering fluid reservoir
I. N0TE:Make sure that the road wheels are in
the straight ahead position.
Materials
Centralize the steering and lock
it in position. return
hose quick release coupling.
2. Detach the steering column shaft from the
steering gear pinion.
return hose quick release coupling.
Allow the fluid to drain into a suitable
container.
Name Specification 1. Press the power steering fluid reservoir return
5m &AUTION:O~~~ bending of the exhaust
flexible pipe may cause damage resulting in
failure.
2006.0 Fiesta 1212006 GI 05648en
hose quick release coupling locking tangs.
Grease
2. Disconnect the power steering fluid reservoir ( SA-M 1 C9107-A
procarmanuals.com