2007 FIAT ULYSSE Owners Manual

TECHNICAL SPECIFICATIONS
224
Maximum speed index
Q =up to 160 km/h
R =up to 170 km/h
S =up to 180 km/h
T =up to 190 km/h
U =up to 200 km/h
H =up to 210 km/h
V =over 210 km/h
ZR =over 240 km/h
W =up to 270 km/h
Y =up to 300 km/h.
Maximum speed rating
for snow tyres
Q M + S =up to 160 km/h.
T M + S =up to 190 km/h.
H M + S =up to 210 km/h.UNDERSTANDING RIM
MARKINGS
The following are the necessary in-
structions to understand the meaning
of the markings on the rim, as shown
in fig. 6.15 =rim nominal diameter in inches
(corresponds to diameter of the tyre
to be mounted) 3-fig. 6;
H2 =“hump” shape and number (re-
lief on the circumference holding the
Tubeless tyre bead on the rim);
ET43 =wheel camber angle (dis-
tance between the disc/rim support-
ing plane and the wheel rim centre
line).
Example: 6
1/2J x 15 H2 ET43
fig. 6
F0B0267b
6 1/2=rim width in inches 1-fig. 6;
J =rim drop centre outline (side
projection where the tyre bead rests)
2-fig. 6;

TECHNICAL SPECIFICATIONS
225
The plate on the front left door fig. 7carries the following data: A -empty
vehicle tyre inflation pressure; B -fully loaded vehicle tyre inflation pressure;
C-tyre dimension; D -rim dimension; E -type of tyre fitted; F -vehicle man-
ufacturing date identification code; G -spare box; H -paint colour code; I-ser-
ial number.
fig. 7
F0B0264b
Rims (*)
Tyres
Spare wheel
(*) Steel or alloy on request.
Rear
3.4
3.0 Front
2.5
2.5 Rear
2.5
2.5 Front
2.5
2.5Empty Full load Tyre
205/60 R16
215/65 R15standard size with steel rim2.0 JTD - 2.2 JTD
6.5J x 15”
7J x 16”
215/65 R15
215/60 R16
COLD TYRE INFLATION PRESSURE
Add +0.3 bars to the prescribed inflation pressure when the tyres are warm. In
any case, check the correct value again when the tyres are cold.

TECHNICAL SPECIFICATIONS
226
DIMENSIONS
The sizes are in mm and refer to the
car fitted with standard tyres.
Luggage compartment volume with
unladen vehicle (V.D.A. rules):
2948 dm
3.
fig. 8
F0B0457b

2.0 JTD
136 HP
190
12.5
34.0 2.0 JTD
120 HP
180
12.9
34.3
TECHNICAL SPECIFICATIONS
227
PERFORMANCE
2.2 JTD
170 HP
200
10.8
32.3
Max speed (*) km/h
Acceleration from 0 to 100 km/h sec.
Kilometre with standing start sec.
(*) Acceptable after the first period of use.

TECHNICAL SPECIFICATIONS
228
WEIGHTS
2.0 JTD 136 HP
6 5/7/8
seats seats
1854÷1957 1818÷1983
1256 1263
1274 1267
2530 2530
100 100
––
750 750
76 76
2.0 JTD 120 HP
6 5/7/8
seats seats
1846÷1949 1811÷1976
1253 1259
1277 1271
2530 2530
100 100
––
750 750
73 72
2.2 JTD 170 HP
6 5/7/8
seats seats
1902÷1988 1875÷2017
1304 1318
1266 1252
2570 2570
100 100
––
750 750
75 75
(kg)
Weight empty (including fluids, 90% fuel in
the tank and no optional)
Maximum allowed loads (1)
– front axle:
– rear axle:
– total:
Maximum load on roof:
Towable weight
– trailer with brakes:
– trailer without brakes:
Maximum load on ball coupling
(trailer with brakes):
(1) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.

TECHNICAL SPECIFICATIONS
229
CAPACITIES
2.0 JTD
120 HP
litres
80
8
9
5.25
1.9
–
1.2
1.2
0.519
7.52.0 JTD
136 HP
litres
80
8
9
5.25
1.9
–
1.2
1.2
0.519
7.5Recommended fluids
and lubricants
Recommended products
Diesel for motor vehicles
(EN590 specifications)
Mixture of distilled water and
PARAFLU11(blue) at 50% or
PARAFLU UP(red) at 50%
SELENIA TURBO DIESEL (❏)
TUTELA MATRYX
TUTELA GI/E
TUTELA GI/A
TUTELA GI/R
TUTELA TOP 4
50-50 mixture of distilled
water and TUTELA
PROFESSIONAL SC 35 2.2 JTD
170 HP
litres
80
8
9
4.75
–
–
1.2
1.2
0.93
7.5
Fuel tank:
– including a reserve of:
Engine cooling system:
Engine sump and filter:
Transaxle:
Automatic gearbox
Hydraulic power steering:
Electro-hydraulic power steering
Hydraulic brake circuit with:
ABS (with ESP)
Windscreen, rear mirror and headlight
liquid reservoir:
(❏) For temperatures lower than –15°C we recommend using SELENIA WR DIESEL SAE5W-40.

Lubricants for
diesel engines (
❏)
TECHNICAL SPECIFICATIONS
230
LUBRICANT AND FLUID SPECIFICATIONS
PRODUCTS WHICH MAY BE USED AND THEIR SPECIFICATIONS
Fluid and lubricant specifications
for correct car operation
Synthetic lubricants SAE 10W-40
complying with ACEA B3 and API CD specifications
Synthetic lubricants SAE 5W-40
complying with ACEA B3 and API CF specifications
Recommended
fluids and lubricants
SELENIA
TURBO DIESEL
SELENIA
WR DIESELApplications
F0B0431b
Use
(❏
) For temperatures lower than –15°C we recommend using SELENIA WR DIESEL5W-40.

TECHNICAL SPECIFICATIONS
231
(*) IMPORTANTDo not add or mix with fluids with specifications other than the specified ones. Use
Drive lubricants
and grease
Brake fluid
Radiator
antifreeze
Windscreen /
rear window/
headlight washer fluidFluid and lubricant specifications
for correct car operation
Synthetic oil SAE 75W-85 complying with API GL4 and
MIL-L-2105 D LEV specifications
ATF DEXRON II D oil, LEV
Synthetic fluid for hydraulic and electro-hydraulic systems
ATF DEXRON III oil
Molybdenum disulphide grease high temperature resistant
specific for homocinetic joints, NLGI 1-2consistency.
Synthetic fluid, F.M.V.S.S. n° 116, DOT 4, ISO 4925,
SAE J-1704, CUNA NC 956-01
Protective with antifreeze action, blue color, based on inhibit-
ed monoethylene glycol, CUNA NC 956-16
Protective with antifreeze action, red colour, based on inhibited
monoethylen glycol, with O.A.T.-based organic formula,
that passes CUNA NC 956-16, ASTM D 3306 specifications
Mixture of alcohol, water and surfactants CUNA NC 956-11Recommended
fluids and lubricants
TUTELA
MATRYX
TUTELA GI/A
TUTELA GI/R
TUTELA GI/E
TUTELA
ALL STAR
TUTELA TOP 4
PARAFLU 11 (*)
or
PARAFLU UP (*)
TUTELA
PROFESSIONAL
SC 35Applications
Mechanical gearbox
and differential
Hydraulic power
steering
Electro Hydraulic power
steering
Electronic
automatic gearbox
CV joints
Hydraulic brakes
and clutch
Cooling ducts
Percentage:
50% down to –35°C
To be used diluted
or neat in windscreen
washer/wiper systems