2007 FIAT ULYSSE Owners Manual

TECHNICAL SPECIFICATIONS
216
CHASSIS MARKING fig. 3
This 2is printed on the windscreen
base, in central position.BODYWORK PAINT
IDENTIFICATION PLATE
fig. 4-5
The bodywork paint code is shown
on plate 3located on the front left
door in point H.
fig. 3
F0B0182b
fig. 4
F0B0184b
fig. 5
F0B0264b

Code Fiat
685
667
424
453
691
723
690
506
TECHNICAL SPECIFICATIONS
217
Paint colour
AMBIENT WHITE
CLASSIC BLUE
Metal-based colours
FUSION GREY
BIG BEAT GREY
ACOUSTIC BLUE
POP AZURE
STREETPUNK GREY
PSYCHOBILLY BLUE
COLDVAWE GREY
WORLD MUSIC BEIGECode
P0WP
P04P
Code
M0ZR
M0YJ
M02M
M04F
M0ZW
M03P
M09E
M0H8
The colour coding is illustrated in the following table:
Code Fiat
249
455

TECHNICAL SPECIFICATIONS
218
ENGINE CODES - BODYWORK VERSIONS
2.0 JTD 120 HP
2.0 JTD 136 HP
2.2 JTD 170 HP
2.2 JTD 163 HP (*)
(*) Versions for specific marketsEngine code
RHK
RHR
4HT
4HPBodywork code
6/7 seats 5/8 seats
179AXH1B1A 179BXH1B1A
179AXL1B1A 179BXL1B1A
179AXM1B 179BXM1B
179AXN1B 179BXN1B

TECHNICAL SPECIFICATIONS
219
ENGINE
2.0 JTD 120 HP
RHK
Diesel
85 x 88
1997
17.5:1
88
120
4000
300
30.5
2000
Diesel for motor
vehicles (EN590
specifications)2.0 JTD 136 HP
RHR
Diesel
85 x 88
1997
17.5:1
100
136
4000
320
2000
Diesel for motor
vehicles (EN590
specifications)2.2 JTD 170 HP
4HT
Diesel
85 x 96
2179
–
125
170
4000
370
37.5
1500
Diesel for motor
vehicles (EN590
specifications)2.2 JTD 163 HP (*)
4HP
Diesel
85 x 96
2179
–
120
163
4000
370
37.5
1500
Diesel for motor
vehicles (EN590
specifications)
Engine code
Cycle
Diameter x stroke mm
Total displacement cm3
Compression ratio
Max power (EEC) kW
corresponding ratio HP
rpm
Max torque (EEC) Nm
corresponding ratio kgm
rpm
Fuel
(*) Versions for specific markets

TECHNICAL SPECIFICATIONS
220
FUEL SUPPLY
MULTIJET Common Rail direct in-
jection with overboost and intercool-
er.TRANSMISSION
CLUTCH
Hydraulically controlled.
MANUAL GEARBOX
Five forward gears and reverse with
synchromesh for front gear engage-
ment.
ELECTRONIC AUTOMATIC
GEARBOX
Two driving methods:
– sequence;
– automatic. Modifications or repairs
to the fuel feed system
that are not carried out
properly or do not take the sys-
tem’s technical specifications in-
to account can cause malfunc-
tions leading to the risk of fire.

TECHNICAL SPECIFICATIONS
221
BRAKES
SERVICE AND EMERGENCY
BRAKES
Front and rear disc brakes with two
operating cylinders for each wheel and
floating shoe.
Crossed hydraulic circuit control fit-
ted with:– ABS with EBD;
– HBA
– TC + ASR
– MSR
– ESP.
HANDBRAKE
Controlled by a lever, it works me-
chanically on the rear brake shoes.
SUSPENSIONS
FRONT
Independent wheel, McPherson sus-
pension with:
– telescopic hydraulic dampers with
flexible anchorage on the body side
and rubber dust guards;
– coil and knock-guard buffers off-
set with the shock absorber;
– stabiliser anchored to the shock ab-
sorber and the swivel arms.
REAR
The suspension is fitted with:
– cross member;
– pulled arms;
– hydraulic shock absorbers;
– coil springs;
– stabiliser.

TECHNICAL SPECIFICATIONS
222
STEERING
Energy-absorbing jointed steering
wheel.
Jointed steering column with angle
and longitudinal adjustment system.
Rack and pinion with hydraulic pow-
er steering.
Minimum steering circle between
pavements: 11.60 m.
WHEELS
RIMS AND TYRES
Steel or alloy rims on request.
Tubeless tyres with radial carcass.
Standard size spare wheel with steel
rim.
The homologated tyres are listed in
the log book.IMPORTANTIn the event of dis-
crepancies between the information
provided in this Owner Handbook and
the Log Book, consider the specifica-
tions shown in the Log Book only.
To ensure safety of the car in move-
ment, it must be fitted with tyres of
specified size and of the same brand
and type on all wheels.
IMPORTANTDo not use inner
tubes with tubeless tyres.
WHEEL GEOMETRY
Front wheel toe-in measured from
rim to rim with vehicle empty:
– toe-in: 2 mm.

TECHNICAL SPECIFICATIONS
223
Rear wheel toe-in measured from
rim to rim with vehicle empty:
– toe-in: 5 mm ±1.
WINTER TYRES
See instructions in the “Getting to
know your car” chapter.
SNOW CHAINS
See instructions in the “Getting to
know your car” chapter.UNDERSTANDING TYRE
MARKINGLoad rating
60 =250 kg85 =515 kg
61 =257 kg86 =530 kg
62 =265 kg87 =545 kg
63 =272 kg88 =560 kg
64 =280 kg89 =580 kg
65 =290 kg90 =600 kg
66 =300 kg91 =615 kg
67 =307 kg92 =630 kg
68 =315 kg93 =650 kg
69 =325 kg94 =670 kg
70 =335 kg95 =690 kg
71 =345 kg96 =710 kg
72 =355 kg97 =730 kg
73 =365 kg98 =750 kg
74 =375 kg99 =775 kg
75 =387 kg100 =800 kg
76 =400 kg101 =825 kg
77 =412 kg102 =850 kg
78 =425 kg103 =875 kg
79 =437 kg104 =900 kg
80 =450 kg105 =925 kg
81 =462 kg106 =950 kg
82 =
475 kg
83 =487 kg
84 =500 kg Example: 205/65 R 15 94 H
205 =Nominal width (distance be-
tween bodysides in mm).
65 =Height/width percentage ratio.
R =Radial tyre.
15 =Rim diameter (in inches).
94 =Load rating.
H =Maximum speed rating.