Page 86 of 216
88
III
A U T O M A T I C A I R C O N D I T I O N I N G
Remarks:When starting from cold, in order to prevent unwanted c o l d a i r , t h e a i r fl o w w i l l i n c r e a s e o n l y g r a d u a l l y t o i t s optimum level.
If you enter the vehicle after a fairly prolonged stop Ifand the temperature inside the vehicle is far from comfortable, it serves no purpose to modify the tem-perature that is displayed as an attempt to go imme-diately to the desired comfort level. The system automatically uses all of its power to compensate the temperature gap as quickly as possible.
Remarks:Water arising from the condensation in the air con-aterditioning drains out through a hole provided for this purpose ; a pool of water may thus form underneath the vehicle when stationary.
Whatever the time of year, even in cool weather the Whateverair conditioning is useful in removing humidity and misting.You are advised to have the air conditioning sys-tem checked on a regular basis. See “Maintenance Guide”.
If you are towing a heavy trailer and outside tem-Ifperatures are high, the air conditioning may be tem-porarily paused if the engine cooling requires this.
Page 88 of 216
90
III
5
6
7
A U T O M A T I C A I R C O N D I T I O N I N G
5. FRONT DEMISTING - DEICING
Press button 5 for rapid clear windows. The warning lamp comes on. This system controls the air condi- t i o n i n g , t h e a i r fl o w a n d t h e e n t r y o f a i r f r o m o u t s i d e . I t sends the ventilation towards the windscreen and side windows.
A press on the 1 button returns you to “AUTO” mode.
6. REAR DEMISTING - DEICING
Press button 6, with the engine running, to start a rapid deicing or demisting of the rear screen and rear view mirrors. The warning lamp comes on.
This mode stops automatically as a function of the out-side temperature. It can be paused by pressing again on button 6 or by stopping the engine.
In the latter case, demisting will resume when the engine is switched on again.Note: The heated rear screen operates independently of the automatic air conditioning.
7. AIR RECIRCULATION – ENTRY OF AIR FROM OUTSIDE
Press successively on button 7 to select air entry mode. The corresponding warning lamp lights up:Recirculation of air inside the cabinThis mode is for excluding unpleasant odours or smoke coming from outside. It should be cancelled as soon as possible to re-allow fresh air into the cabin and thus prevent misting.
Entry of air from outside“AUTO” mode is deactivated.
Note: To return to “AUTOto “to “” mode, press button 7 for 7a third time, or button 1.
Page 90 of 216
92
III
A
B
C
D
AUTOMATIC OPERATION
Activation
When you press button A, the automatic mode automatically and simultaneously controls the air fl o w and air distribution for the rear air conditioning.
The warning lamp on button Alights up.
It is recommended to keep both air vents open.
Deactivation
A press on any of the buttons B, C or D, deactivates the automatic operation of the rear air condition-ing.
the warning lamp on button A goes out.
Remark: If the air conditioning in the front of the cabin is stopped (function deactivated in the “Air conditioning” menu or via the con-trol 4 f o r a d j u s t i n g t h e a i r fl o w ) , then the rear automatic air condi-tioning is not available.
ADJUSTING THE AIR FLOW
If you press buttons B or D you increase or decrease t h e fl o w f o r the rear air conditioning.
T h e n u m b e r o f d i o d e ( s ) l i t u p , c o m p o s i n g t h e s y m b o l f o r a i r fl o w (helix, situated between buttons Band D ) e x p r e s s e s i t s p o w e r l e v e l .
T o d e a c t i v a t e t h e a i r fl o w a n d a i r distribution for the rear air condi-tioning, press successively on but-ton D so that all the diodes go out.
DISTRIBUTION TO FOOT-WELLS/HEADS
Successive presses on button Cwill modify the distribution of the a i r fl o w .
Three directions are available:Passengers' heads.
Passenger footwells.PassengerPassengers' heads and foot-wells.
The arrow lit up indicates the dis-tribution of air chosen manually. In “AUTO” mode, no arrow lights up.
ADJUSTMENT OF THE FLOW OF AIR INTO THE STORAGE UNDER THE FRONT CEN-TRAL ARMREST
I f y o u c h o o s e a m a x i m u m fl o w of air in the rear by pressing Band distribution towards passen-ger's heads by pressing C, having closed the rear air vents, you will o b t a i n a m a x i m u m fl o w o f a i r i n t o the storage beneath the armrest.
Page 91 of 216
93
IIIC
D
R E A R S E A T S
REAR HEAD RESTRAINTS
The rear head restraints have two positions:A stowed position for when the Aseat is not occupied.
A deployed position for safety of Apassengers, locking into place including for a forward-fac-ing child seat.
To lower the head retraints, press on the tab at the base.
To raise them, pull them upwards to their maximum height, pressing the unlocking button.
Page 93 of 216
95
III
A
BC
D
R E A R S E A T S
Seat cushion folded.
Stow the head restraints.
Press the control A located at the end of the backrest and fully tilt for-wards.
The benchseat backrest can be folded in two sections. When you reposition the backrest, make sure that it locks in place.
Your vehicle's boot can be kept isolated from the passenger com-partment.
To lock the access to the boot:1. Place the benchseat in its cor-rect position.The red warning lamp on con-trol A should no longer be vis-ible.
2. Insert the ignition key in the lock.3. Lock it.
Before moving the seats
So as to avoid damaging the seat belts by jamming them, take care to keep them to the sides of the backrest.
LOCKING/UNLOCKING OF THE ACCESS INTO THE BOOT VIA THE REAR BENCHSEATREAR CENTRAL SEAT BELT
For easier opening of the seat belt cover D , y o u s h o u l d fi r s t r a i s e t h e central head restraint.
I n s e r t t h e fi r s t f a s t e n i n g C into the f r o n t l e f t h a n d ( b l a c k ) b u c k l e , t h e n insert the second fastening B into the front right hand buckle.
Page 104 of 216
106
IIIB
C
A
I N T E R I O R C O M F O R T
GLOVEBOX
To open the glovebox, pull on the handle and lower the lid.
The glovebox has three sockets Afor connecting audio/video equip-ment.
Changing the bulb
To change the bulb in the glovebox lamp, detach the cover B, use a bulb W 5 W.
CUP-HOLDERS
To deploy the cup-holders, press on button C.
DRIVER'S ODDMENTS TRAY
To open the driver's oddments tray, pull the handle towards you.
While the vehicle is moving:The glovebox should remain closed.
The cup-holders should remain stowed
Page 107 of 216
109
III
ASHTRAY
Central front ashtray
T o o p e n i t , p r e s s t h e fl a p a t t h e centre.
To empty the ashtray, pull the assembly towards you.
R e fi t t i n g
Reposition the ashtray in its hous-ing, then press home.
Lateral ashtrays
Each passenger door has a lateral ashtray.
To open, lift the ashtray lid.
To empty a lateral ashtray, after opening, pull the inner section upwards.
R e fi t t i n g
Reposition the assembly in its housing, then press home.
I N T E R I O R C O M F O R T
Page 122 of 216
124
IV
CD CHANGER
This equipment S ( i f p r e s e n t ) i s l o c a t e d in the vehicle boot and comprises a magazine that holds up to 6 CDs.
TO INSERT/REMOVE A CD1. Remove the magazine from the CD changerOpen the sliding door of the CD changer.Press on the “EJECT” button to eject the magazine partially.
Remove the magazine carefully.
Close the sliding door.2. Removing a compartmentTake out just one drawer at a time.
3. Inserting/removing a CDInsert a single CD, printed side sertupwards. Otherwise the CD changer will not operate.
Pull out the CD by pulling on the part that is showing.
4. Repositioning the compartment R e fi t t h e d r a w e r b y p u s h i n g i t i n t o the magazine. Do not push directly on the CD.
5. Repositioning the magazineOpen the sliding door.
Hold the magazine, narrow side towards the opening of the CD changer.
Push the magazine gently into the aperture of the changer until there is a click.
Reclose the sliding door to prevent entry of dust or of foreign bodies.
