2007 CHRYSLER 300 SRT Owners Manual

Page 113 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual WARNING DISPLAY DISTANCES
DISPLAY LED OBSTACLE DISTANCE FROM: LED COLOR AUDIBLE SIGNAL
REAR CORNERS REAR CENTER
1st LED 59 in. (150 cm) Yellow None
2nd LED 47 in. (120 cm) Yellow None
3rd LED 39 in. (

Page 114 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual WARNING!
•Drivers must be careful when backing up even
when using the Rear Park Assist System. Always
check carefully behind your vehicle, look behind
you, and be sure to check for pedestrians, anim

Page 115 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual If “Service Park Assist System” appears in the Electronic
Vehicle Information Center (EVIC) after making sure the
rear bumper is clean please see your authorized dealer.
OVERHEAD CONSOLE
The overh

Page 116 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual GARAGE DOOR OPENER (HomeLink)
The HomeLinkUniversal Transceiver replaces up to
three remote controls (hand held transmitters) that oper-
ate devices such as garage door openers, motorized
gates, or

Page 117 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual Programming HomeLink
NOTE:
When programming a garage door opener, it is
advised to park outside the garage. It is also recom-
mended that you install a new battery in the hand-held
transmitter of the

Page 118 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual 1. Press and hold the two outer HomeLink buttons.
Release the buttons only when the EVIC displays “Chan-
nels Cleared” (after 20 seconds); however,do nothold
the buttons for longer than 30 seconds

Page 119 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual NOTE:If your garage door opener fails to respond to
the programmed HomeLinkUniversal Transceiver, and
your garage door opener is manufactured after 1995, it
may have a multiple security code system (

Page 120 of 360

CHRYSLER 300 SRT 2007 1.G Owners Manual NOTE:If programming a garage door opener or gate
operator, it is advised to unplug the device during the
cyclingprocess to prevent possible overheating.
3. Continue to press and hold the HomeLink bu