2007 CHEVROLET OPTRA 5 Owners Manual

Page 153 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual When adding electrical equipment, be sure to
follow the proper installation instructions included
with the equipment.
Notice:Improper use of the power outlet can
cause damage not covered by your warra

Page 154 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual Clock
Your vehicle has a digital clock. If you have the
wagon, the clock is located in the center of the
instrument panel below the air outlets. If you have a
hatchback, the clock is located in the ce

Page 155 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual Climate Controls
Climate Control System
With this system you can control the heating,
cooling and ventilation for your vehicle.
9(Fan):Turn the left knob clockwise or
counterclockwise to increase or d

Page 156 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual A/C (Air Conditioning):If your vehicle has air
conditioning, follow these steps to use the system.
Start the engine and set the fan control knob to
the desired fan speed. The air conditioning
compress

Page 157 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual Defogging and Defrosting
Fog on the inside of windows is a result of high
humidity or moisture condensing on the cool
window glass. This can be minimized if the climate
control system is used properly

Page 158 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual Front Heated Windshield
Your vehicle may have a heated front windshield
which can be used with defog and defrost.
This feature will only work when the ignition is
turned to ON.
The front heated windsh

Page 159 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual The rear window defogger will turn off about
10 minutes after the button is pressed. The
defogger can also be turned off by pressing the
button again or by turning off the engine. See
“Front Heated

Page 160 of 422

CHEVROLET OPTRA 5 2007 1.G Owners Manual To change the passenger compartment air filter,
use the following steps:
1. Remove the four screws from the filter cover
located below the glove box.
2. Remove the filter cover.3. Remove the old pa