2007 CHEVROLET AVALANCHE lock

[x] Cancel search: lock

Page 490 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual License Plate Lamp
To replace one of these bulbs, do the following:
1. Reach under the rear bumper for the bulb
socket.
2. Turn the bulb socket counterclockwise and
pull the bulb socket out of the con

Page 491 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for
wear or cracking. SeeScheduled Maintenance
on page 563.
Replacement blades come in different types and
are removed in

Page 500 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual In�ation - Tire Pressure
Tires need the correct amount of air pressure to
operate effectively.
Notice:Do not let anyone tell you that
under-in�ation or over-in�ation is all right.
It is not. If your t

Page 505 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual 4. If your vehicle has the DIC buttons, press the
set/reset button. The horn will sound twice to
indicate the TPMS receiver is ready, and
the TIRE LEARNING ACTIVE message will
display. If your vehicle

Page 510 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual Your vehicle’s original equipment tires are listed
on the Tire and Loading Information Label.
This label is attached to the vehicle’s center pillar
(B-pillar). SeeLoading Your Vehicle on page 402,

Page 517 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual CAUTION: (Continued)
4. Turn off the engine and do not restart
while the vehicle is raised.
5. Do not allow passengers to remain
in the vehicle.
6. Put the wheel blocks at the front and
rear of the ti

Page 518 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual Removing the Spare Tire and Tools
The jack and the wheel blocks are located
under a cover near the passenger side rear seat.
To remove the jack and wheel blocks, do the
following:
1. Remove the jack c

Page 519 of 618

CHEVROLET AVALANCHE 2007 2.G Owners Manual 3. Remove the wheel blocks (A) attached to
the jack (E) by turning the wing nut (C)
counterclockwise. Place the wheel blocks
where needed as indicated in previously in
this section.
The tools for chan