2007 Acura MDX Owner's Manual

Whenthetirepressuremonitoris
shown on the multi-info rmation
display, press the SEL/RESET
button. The display changes as
shown.
You can see the pressure of each tire
in this monito r. If one or more tires
are low, inflate them to the correct
pressure. For more information, see
page .
This
monitor shows how much
to rque is being delivered to each
wheel. For more information, see
page .
This
shows the remaining life of the
engine oil. It shows 100% after the
engine oil is replaced and the display
is reset. The engine oil life is
calculated based on engine operating
conditions and accumulated engine
revolutions. For more information,
see page .
375 340
343
Tire Pressure Monitor
SH-AWD T orque Distribution
Monitor
Engine Oil L if e
Multi-Inf ormation Display
Inst rument s and Cont rols
77
U.S.
Canada
ENGINE OIL LIFE
——y

y
()-yy

You can receive or make phone calls
from your cellphone through your
vehicle’s HandsFreeLink (HFL)
system without touching your
cellphone. To
use the system, your cellphone
and the HFL system must be linked.
Not all cellphones are compatible
with this system. Ref er to page for instructions on how to link
your cellphone to the HFL and how
to receive or make phone calls, or
visit the handsf reelink.com website.
When the main menu displays Trip
Computer, pressing the SEL/RESET
button changes the display to
‘‘AVERAGE FUEL A/RANGE’’ to
‘‘AVERAGE FUEL B/RANGE’’ and
to ‘‘AVERAGE SPEED/ELAPSED
TIME’’.
276
HandsFreeL ink T rip Computer
Multi-Inf ormation Display
78
TM
——y

y
()-yy

This shows the estimated distance
you can travel on the fuel rema ining
in the fuel tank. This distan ce is
estimated from the fuel economy
you received over the last several
miles(U.S.) or kilometers (Canada),
so it will vary with changes in speed,
traffic, etc.
This
shows your vehicle’s average
fuel economy in mpg (U.S. model s)
or liter/100 km (Canadian models)
since you last reset the Trip A or
Trip B.
You can customize the Trip A and
AVERAGE FUEL A reset condition
in the multi-information display (see
page ).
This shows the average speed you
are traveling in miles per hour (mph)
forU.S.modelsorkilometersper
hour (km/h) for Can adian models.
To reset the AVERAGE SPEED you
have traveled, press and hold the
SEL/RESET button until the
number resets. This
shows the time passed traveled
since you last reset it. When you turn
the ignition switch to the ON (II)
pos ition, ELAPSED TIME is reset.
If you want to reset the ELAPSED
TIME manually, go to the trip
computer’s ELAPSED TIME display,
andpressandholdtheSEL/RESET
button until the number resets.
You can customize the ELAPSED
TIME reset condition in the multi-
inf ormation display (see page ). 94
92
AVERAGE FUEL A/B
RANGE
A VERA GE SPEED EL A PSED T IME
Multi-Inf ormation Display
Inst rument s and Cont rols
79
——y

y
()-yy

ÛÝÛÝ
ÛÝ
If there is a problem with your
vehicle, f or example, the engine oil
level is low or a door is not f ully
closed, the multi-inf ormation display
will show you the problem. It does
this by interrupting the current
display with one or more messages. The system message(s) triggers the
appropriate indicator(s) on the
instrument panel, including the
system message indicator, to come
on. The system message indicator
does not go of f until the problem(s)
is corrected.
You will also hear a beep when the
system message indicator comes on
for the first time.
Most of the messages are displayed
f or about 5 seconds, and then the
normal display returns. If there are
several system messages to be
shown, the display switches these
messages every 5 seconds.
To cancel the message(s) bef ore 5
seconds elapsed, press the INFO
( / ) button on the steering wheel.
Even if you press the INFO ( / )
button, some messages stay on or
come on again at regular intervals
until the problem is corrected.
You can see the message(s) again by
pressing the INFO ( / ) button
repeatedly if the system message
indicator remains lit on the
instrument panel.
Here is a list of all messages:
Multi-Inf ormation Display
System Messages
80
SYSTEM MESSAGE INDICATOR
——y


y
()-yy

CONTINUED
See page
33
See
page
11
See page
20
See page
20
See page
33 See
page
151
See page
432
See page
432 See
page
430
See page 431
See page 430
See page 349
See page 351
See page 368
Multi-Inf ormation Display
Inst rument s and Cont rols
81
U.S.
Canada U.S.
Canada
U.S.
Canada
U.S.
Canada
——y



y
()-yy

See page
341 See
page
332
See page
121
See page
376
See page
318
See page
71
See
page
392
See
page
354
See
page
333
See
page
341
See page
134
See
page
68
See
page
345
See page
346
See page
346
Multi-Inf ormation Display
82
U.S.
Canada
——y


y
()-yy

When the main menu displays
‘‘Keyless Memory Settings ,’’ you
can customize some vehicle control
settings.
To enter the customizing mode,
press the SEL/RESET button. If
you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shift lever out
of Park, the display will change to
the normal screen.
You can customize some vehicle
control settings for ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separate ly. If ‘‘DRIVER
1’’ or ‘‘DRIVER 2’’ is not displayed,
cu stomizing is not possible.
To have the driver’s ID detected,
make sure your remote transmitter
is linked to the system (see Keyless
Memory Settings on page ).If
you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page .
Ref er to the table on the f ollowing
pages about the settings you want to
customize. If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the transmission in
Park. 86
139TM
CONT INUED
Multi-Inf ormation Display
Customize Settings
Inst rument s and Cont rols
83
TM
—

—yy
()-yy

ÎÎÎ
Î Î
Î
Î
Î
Î
µ™ ¶™
µ™¶™
Î TRIP B
LOW
MIN
OFF
ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
(U.S.) 3°C 0°C 3°C
(Canada)
ON
OFF
HIGH
MID
LOW
MANUAL ONLY
IGN OFF
TRIP A
MAX
HIGH
MID
ON
OFF
ON
OFF
Changes the language used in the display.
Changes the outside temperature reading a
bove or
below i ts current reading.
Causes trip me ter A and the average fuel e conomy
to reset when you refuel.
Changes the indicator alarm volumes into three
levels.
Resets the elapsed time of your current trip.
Changes the interior light sensitivity to your liking.
Changes the driver’s seat, the steering wheel, and
the outside mirror positions to a stored setting.
Mo ves the steering wheel fully in and up when
the key is removed.
METER SETUP
(P.89)
POSITION SETUP
(P.97)
90
91
92
93
94
95
98
99
LANGUAGE
SELECTION
ADJUST OUTSIDE
TEMP. DISPLAY
TR IP A & AVG. FUEL
RESET with REFUEL
ADJUST
ALARM VOLUME
ELAPSED TIME RESET
AUTO INTERIOR
ILLUMINATION
MEMORY POSITION LINK
AUTO TILT & TELESCOPE
STEERING WHEEL
: Default setting
Setting Option
Description
Group Setup Page
Menu Item
Multi-Inf ormation Display
84
——y


y
()-yy