MULTIMEDIA
Fault finding - Interpretation of statuses
86C
86C-45
NAV 4R
Program no.: 0000
Vdiag No.: 24
ET037
CONTINUED 2
Check that the wheel is operating correctly by checking the continuity between the following connections:
●34AR and 34AT
●34AR and 34AU
●34AR and 34AS
on component 325 (Scénic: 1519).
If there is no continuity, replace component 325 (Scénic: 1519).
Mégane II ph2 (see MR 364 mechanical, 84A Control - Signals, Steering wheel controls: Removal -
Refitting).
Laguna II ph2 (see MR 395 mechanical, 84A Control - Signals, Steering wheel controls: Removal - Refitting).
Scénic II ph2 (see MR 370 mechanical, 84A Control - Signals, Steering wheel controls: Removal - Refitting).
Master ph2 and ph3 (see MR 377 mechanical, 86A Radio, Radio control satellite: Removal - Refitting).
Master propulsion ph2 (see Technical Note 3818A, 86A, Radio, Radio control satellite: Removal - Refitting).
Trafic II ph1 and ph2 (see MR 408 mechanical, 86A Radio, Radio control satellite: Removal - Refitting).
If the fault is still present, contact the Techline.
AFTER REPAIRRepeat the conformity check from the start.
MULTIMEDIA
Diagnostic - Fault finding chart86C
86C-80
NAV 4R
Program no.: 0000
Vdiag No.: 24
ALP 13 Satellite control
NOTESOnly check the customer complaint after performing a full check with the diagnostic
tool.
Ensure there are no present or stored faults.
There is no response when one of the radio satellite control buttons is pressed.
Refer to the interpretation of statuses ET006 + button, ET007 - button, ET008 Top button, ET009 High button,
ET010 Low button, ET036 MUTE button and ET037 Satellite wheel.
AFTER REPAIRCarry out a complete check with the diagnostic tool.
NAV4R_V24_ALP13
