Page 31 of 86

MULTIMEDIA
Fault finding - Conformity check
86C
86C-30
NAV 4R
Program no.: 0000
Vdiag No.: 24
Sub-function: USER SELECTION
NOTESOnly perform this conformity check after a thorough check with the diagnostic tool.
The values shown in this conformity check are given as examples.
Application conditions: Engine stopped, ignition on.
Order FunctionParameter / Status
checked or ActionDisplay and Notes Fault finding
1
Steering
wheel
controlsET006:+ buttonPRESSED
RELEASED
In the event of a fault, consult
the interpretation of statuses
ET006 + button, ET007
- button, ET036 MUTE
button, ET008 Top button,
ET009 High button and
ET010 Low button. 2ET007:- buttonPRESSED
RELEASED
3ET036:MUTE buttonPRESSED
RELEASED
4ET008:Top buttonPRESSED
RELEASED
5ET009:High buttonPRESSED
RELEASED
6ET010:Low buttonPRESSED
RELEASED
7
Front panel
buttonET026:Radio on/off buttonPRESSED
RELEASED
If the fault is still present,
contact Techline. 8ET027:CD eject buttonPRESSED
RELEASED
9ET028:Tone buttonPRESSED
RELEASED
10 ET029:Voice synthesiser
buttonPRESSED
RELEASED
11 ET030:Station
preselection buttonPRESSED
RELEASED
12 ET014:Source buttonPRESSED
RELEASED
13 ET032:Navigation buttonPRESSED
RELEASED
Page 43 of 86

MULTIMEDIA
Fault finding - Interpretation of statuses
86C
86C-42
NAV 4R
Program no.: 0000
Vdiag No.: 24
ET006
ET007
ET008
ET009
ET010
ET036
CONTINUED 3
If the measured values do not correspond with the values above, replace the radio satellite control.
Mégane II ph2 (see MR 364 mechanical, 84A Control - Signals, Steering wheel controls: Removal -
Refitting).
Laguna II ph2 (see MR 395 mechanical, 84A Control - Signals, Steering wheel controls: Removal - Refitting).
Scénic II ph2 (see MR 370 mechanical, 84A Control - Signals, Steering wheel controls: Removal - Refitting).
Master ph2 and ph3
(see MR 377 mechanical, 86A, Radio control satellite: Removal - Refitting).
Master propulsion ph2
(see Technical Note 3818A, 86A, Radio, Radio control satellite: Removal - Refitting).
Trafic II ph1 and ph2
(see MR 408 mechanical, 86A, Radio control satellite: Removal - Refitting).
If the measurements are in order, contact the Techline.
AFTER REPAIRRepeat the conformity check from the start.
Page 46 of 86

MULTIMEDIA
Fault finding - Interpretation of statuses
86C
86C-45
NAV 4R
Program no.: 0000
Vdiag No.: 24
ET037
CONTINUED 2
Check that the wheel is operating correctly by checking the continuity between the following connections:
●34AR and 34AT
●34AR and 34AU
●34AR and 34AS
on component 325 (Scénic: 1519).
If there is no continuity, replace component 325 (Scénic: 1519).
Mégane II ph2 (see MR 364 mechanical, 84A Control - Signals, Steering wheel controls: Removal -
Refitting).
Laguna II ph2 (see MR 395 mechanical, 84A Control - Signals, Steering wheel controls: Removal - Refitting).
Scénic II ph2 (see MR 370 mechanical, 84A Control - Signals, Steering wheel controls: Removal - Refitting).
Master ph2 and ph3 (see MR 377 mechanical, 86A Radio, Radio control satellite: Removal - Refitting).
Master propulsion ph2 (see Technical Note 3818A, 86A, Radio, Radio control satellite: Removal - Refitting).
Trafic II ph1 and ph2 (see MR 408 mechanical, 86A Radio, Radio control satellite: Removal - Refitting).
If the fault is still present, contact the Techline.
AFTER REPAIRRepeat the conformity check from the start.