2006 NISSAN QUEST Owners Manual

Page 305 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual Checking tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge squarely
onto the valve stem. Do not press too
hard or force the valve stem side-
ways, or air will escap

Page 306 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the
sidewall of all tires. This information iden-
tifies and describes the fundamental
characteristics of the

Page 307 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual MichelinTPAXTTire size (example: 225-
700R480A 100H)
1. Three-digit number: This number
gives the width in millimeters of the
tire from sidewall edge to sidewall
edge.
2. Three-digit number: This numb

Page 308 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual s2TIN (Tire Identification Number) for a
new tire (example: DOT XX XX XXX
XXXX)
1. DOT: Abbreviation for the9Depart-
ment Of Transportation.9The symbol
can be placed above, below or to the
left or rig

Page 309 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual The word9radial9is shown if the tire has
radial structure.
s8Manufacturer or brand name
Manufacturer or brand name is shown.
Other Tire-related Terminology
In addition to the many terms that are
defin

Page 310 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual If you install snow tires, they must be the same
size, brand, construction and tread pattern on all
four wheels.
For additional traction on icy roads, studded tires
may be used. However, some U.S. sta

Page 311 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual cAvoid driving over any projection or
pothole, as the clearance between the
vehicle and the ground is smaller than
normal.
cDo not enter an automated car wash
with a punctured MichelinTPAXTtire.
cHave

Page 312 of 352

NISSAN QUEST 2006 V42 / 3.G Owners Manual Wheel nut tightening torque:
83 ft-lb (112 N·m)
The wheel nuts must be kept tight-
ened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire ro