2006 MITSUBISHI COLT igni

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-19
REAR WIPER AND WASHER
REAR WIPER CONTROL [THE INITIAL CONDITION: 8 SECONDS (WITHOUT SUCCES-
SIVE OPERATIONS)]
AC207474AB
t
ON
OFF
ON
OFF
ON
OFF T2
T3
T2
T3
T1 T4
T4
T1 T4
T4 T4
T3
T2 T2T2
T2: 7.4 seconds
Rear wiper drive signal Rear wiper switch
Inhibitor switch "R" position
T1: 3.0 seconds
t: 1.0 second
T3: 8.0 seconds
T4: 0.6 second
1. Whe n the rear wipe r switch on the colu mn switch
is turne d ON wit h the ignit i on switch at the ACC
or ON positio n, ET ACS-ECU turns ON the rear
wipe r drive signal for 3 se conds (ap p roximat e ly 2
ope ration s) an d perfo rms the in termittent action
at 8 - second intervals.
When th e se lect or lever is moved to R position dur-
ing the rear wipe r ope ratio n , t he inh i bitor swit ch R
position turn
s ON one seco nd af ter th at,
ET
ACS - ECU se nd s th e re ar wipe r d r ive sign al f o r
3 seco
nds (approximately 2 op eratio ns), a nd
ope
rates the intermittent action in 8 secon d s
in
terva l .
2.By t he sp ecial op eration of th e rear wiper switch
on the column switch (successive 2-time opera
-
tions), the rea r wiper op erates co ntinu ously
rega
rdless o f the set intermittent time .
NOTE: The rear wipe r inte rmit tent time can b e
a
d
just
ed o r ca ncelled fo r con t inu ous o peratio n by the
customise f unction (Refe r to
P.54B-25).

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-20
REAR WIPER LINKED WITH WASHER FUNCTION (THE INITIAL CONDITION: WITH
FUNCTION)
AC207003AB
t
tt
ON
OFF
ON
OFF
ON
OFF T1T1 T1T2
T3
T4 T4 t : 0.3 second
T1 : 3 seconds
T2 : 7.4 seconds
T3 : 8 seconds
T4 : 0.6 second Rear wiper switch
in off position
Rear wiper switch in on position
Rear washer switch
Rear washer relay
Rear wiper relay
•Whe
n the re ar wash er swit ch on the column
switch is tu
rned ON with th e ign i tio n switch ACC
or ON, ET
ACS-ECU t u rns ON the rear wash er
relay
. When the re ar washe r switch signa l from
th
e co lu m n swi t c h re ma in s ON f o r 0. 3 se co nd s or
more, ET
ACS-ECU turns ON the r ear wiper relay
to o
perate the rea r wiper continuously . Wh en the
rear
wa sher switch is turned OFF , the
ET
ACS-ECU turns OFF the rea r wiper relay 3
se
cond s later . Th en the rear wip e r sto p s at th e
aut
o sto p positio n.•Even turning ON the rea r wa sher switch during
rear
wiper op eratio n ca uses the r ear wipe r relay
to switch the o
peration to continuou s ope ration ,
and
then t he rear wiper resumes intermittent
ope
ration at interva l s of eig h t se cond s, 7. 4 sec
-
onds af ter t he co mpletion of the con t inuo us op er-
ation.
NOTE: Using a cust omisation fun c tio n , a d r ive r can
enable or disab l e th e rear wip e r linked with washer
funct
i
on. F o r mo re inf o rmation ab out th e customisa
-
tion feature, refer to P.54B-25.
ELECTRIC RETRACT ABLE RE MOTE CONTROLLED MIRROR
ELECTRIC RETRACTABLE REMOTE CONTROLLED MIRROR TIMER FUNCTION
AC309810
Ignition switch (ACC)
AC
t: 0.1 second
T1: 30 seconds
T2: 16 seconds
ON
OFF
T2
T2
T2
T2
T2 T2
t
tt
T1
T1
OFFON
OFF
ON
OFF ON
Door mirror unfold relay
Door mirror fold relay Remote controlled mirror switch
(folding/unfolding switch)
When th
e unfo l din g /folding switch on t he fold switch
remote
controlled mir r or switch is turn ed ON with the
ignition
switch at th e ACC o r ON po sition, th e door
mirro
r unfold relay or fold r e lay is turned on for 16
seconds
t o unfold or fold the d oor mirrors. Even af ter
the ig
nition switch is tu rned OFF , the do or mirrors
can o
perate for 30 seconds.If the un fold ing/f o lding switch o n the remote con t rol-
led mirror switch is turne d ON while on e of th e door
mirro
r unfold relay or door mirror fo ld relay is in op er
-
ation, the o t her relay fo r the o pposite motio n is
turned
ON af ter 0.1 second.

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-21
NOTE: Whether the door mirrors are at the unfolding
or folding position is determined according to the
memory of the door mirror fold relay operated previ
-
ously. For this reason, if the door mirrors are manu-
ally retracted, they may not move when the
unfolding/folding switch on the fold switch remote
controlled mirror switch is pressed next time.
AUTOMATIC UNFOLDING FUNCTION1.
AC207002AB
ON
OFF ON
OFF ON
OFF ON
OFF
T
T
Ignition switch 30 km/h
0 km/h
Unfolding Folding
Vehicle speed
Remote controlled mirror switch
(folding/unfolding switch)
Door mirror position Door mirror unfold relay
Door mirror fold relay
T : 16 seconds
Ve hicle speed-d epend ent au tomat i c u n fold ing func-
tion
When th e ve hicle speed re ache s 30 km/h, with the
ig nition switch ON and the mirrors retracted,
ET ACS-ECU turns on the retraction mirror relay
(unf olding) for 16 se cond s to return th e door mir
-
rors. However, the door mirrors do not return to
the
i r normal p o sitions auto m atically if the ignition
switch is tu
rned fro m OFF to ON, and then th e
unf
olding/folding switch on the remote contro lled
mirror switch
is operate d .
NOTE: Whe t her the door mirrors are at th e unfo l din g
or fold
ing p o sition is d e termined accordin g to th e
memory o f the re traction mirror re lay operat ed previ
-
ously. For th is re ason , if t he mirrors are manually
retract
ed, the y may n o t mo ve when the u n fold
-
ing/folding switch is pre s sed next time.
FLASHER TIMER FUNCTION
TURN-SIGNAL LAMP (I NITIAL SETTING:
TURN SIGNAL LAMP CAN BE OPERA
T ED
W
H EN THE IGNITION SW ITCH IS IN THE
ON POSITION)
AC101508
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Ignition
switch (IG)
Turn-signal lamp
switch RH
Turn-signal lamp
switch LH
Turn-signal lamp
output RH
Turn-signal lamp
output LH
AC
When th
e turn-sign a l lamp switch is ON (LH o r RH)
with the
ignition switch is ON, t he turn -sig nal lamp
output
(flash signal) is turned ON.
If the lamp bulb of the front o r rear turn -sig nal lamp
has burned out, the flashing speed beco
m es faster to
alert t
he driver th at the lamp bulb has burne d out.
NOTE: Using a cust omisation fun c tio n , this fu nction
beco
m
es ava ilab l e even whe n the ignit i on switch is
in the
ACC po sit i on. F o r mo re info rmation ab out th e
customisation fe ature, re fer to
P.54B-25.

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-23
INTERIOR LAMP
INTERIOR LAMP DIMMER CONTROL FUNCTION (THE INITIAL CONDITION: 15 SEC-
ONDS)
AC31030515 seconds
(All closed) OFF
(Any one open) ON ON
OFF
Key removed ACC
100 % 0 %
60 %
Door switch
(Unlock) OFF(Lock) ON
Driver's door
lock actuator switch
(lock switch)
Interior lamp brightness
Ignition switch
15 secondsAC
Wh
en t h e int e r i or lamp switch is o n th e do or p o sitio n ,
ET
ACS-ECU controls the inte rior lamp lamp s as fol
-
lows.
1.Whe n the ignit i on switch is OFF:
By opening a n y d oor or t a ilgate , the lamp turns ON
(100 %), and dims (60 % ) when t he doo r or t a il
-
gate is clo s ed, then a nd turn s of f af ter 15 sec-
onds.
However , whe n the ignit i on switch is turned ON or
the door lock is operat ed, the lamp s turn of f a t
tha t time.
2.Whe n the ignit i on switch is ON:
By opening a n y d oor or t a ilgate , the lamp (100%)
turn s ON a nd OFF when t he doo r or t a il gate is
cl ose d .
3.Whe n all doors and the t a ilgate are close d , and
the ignition key is remo ved:
By removing the ignition key with a ll d oors a nd the
t a ilgate closed, th e lamp tu rns ON 60%, a nd
turn s of f af ter 15 seconds.
By inserting the ignition key again or op erating the
doo r lock wit h the lamp lit, the lamp s turns of f.
NOTE: For t he ve hicles with th e keyless e n try sys-
tem, the delaye d lamp-off time and t he ope ration
time
s of the keyless entry inte rior lamp answer b a ck
can b
e ch anged by th e cu stomise function (Re f er to
P.54B-25).

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-24
IGNITION KEY CYLINDER ILLUMINATION LAMP CONTROL FUNCTION
AC314095
t: 30 seconds
(Closed) OFF
(Opened) ON ON
OFF
(Key removed) ON
(Key inserted) OFF
(Illuminated) ON
(Extinguished) OFF
Driver's seat door switch Key reminder switch
Ignition key cylinder
illumination lamp Ignition switch (IG)
tt ttt tt
AB
The ETACS-ECU con t rols the ignition key cylinde r
illuminatio
n lamp an d foot lamp as d e scribe d below .
1. T he ig nit i o n key cy lin de r ill umi n a t io n la mp an d fo r
30 seconds wh en the driver's d oor is
ope ned/closed with the ignition switch OFF .
2.Also when t he ig nition ke y is remove d from the
ig nition ke y cylinder , the lamp illuminates for 30
se cond s.
3.Whe n the ignit i on key cylind e r illumination lamp
is oper ating with the doors closed , it g oes o u t if
the ignition switch is turne d ON.
DOOR-AJAR INDICAT O R
The ETACS-ECU sen d s th e open /close st atus of
each
door to the comb ination meter th rough CAN
communicat
i on. The comb ination meter receives the
transmitte
d signal and t u rns ON and OFF t he
door-ajar in
dicator . Th e door-a jar indicator f l ashes
wh
en the door-ajar warning fun c tio n is activat ed
wh
ile the doo r-ajar indicato r is ON (For more infor
-
mation about the door-ajar warning fun c tio n , refe r to
).

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-25
CUSTOMISE FUNCTION
M2541006000243
Using M.U.T.-III adjusts the following function. The
programmed information is held even when the bat
-
tery is disconnected.
•Vehicle speed-dependent wiper function
With the windshield wiper switch in the intermittent
position, the intermittent duration changes
depending on the intermittent adjusting knob
position and the vehicle speed.
•The selector "P" position-linked central door
unlocking function
When the selector lever is shifted to the "P" position,
all the doors unlock.
•Turn-signal lamp operation sound function
Synchronized with the hazard lamp and the turn sig-
nal lamp, the buzzer sounds.
•Dimmer interior lamp control duration
When the door is closed with the ignition switch
LOCK (OFF), the interior lamp is turned OFF
automatically in the specified time.
•Timer lock time after executing the keyless entry
unlock
If any door including a tailgate is not opened after
being unlocked with the keyless transmitter,
doors are locked automatically within the speci
-
fied time.
•Door-ajar warning function
Driving with any door, including a tailgate, not prop-
erly closed sounds the buzzer to let the driver
know the door-ajar state.
•Rear wiper intermittent duration
When the rear wiper switch is turned ON, the rear
wiper operates in the intermittent action. When
the rear wiper switch is turned from OFF to ON
two cycles, the rear wiper makes continuous
operation regardless of the intermittent operation
duration setting.
•Wiper linked with washer function
When this function is active, the windshield wiper
operates if the washer switch is turned ON.
•Hazard answer back function of the keyless entry
system
When lock/unlock is operated with the keyless entry
transmitter, the horn sounds so that the driver can
recognize the lock/unlock status of the vehicle
even if the driver is away from it.
•Initialising all functions (Returning to the initial
condition)
All adjusting functions are returned to the settings at
the time of factory shipment.
Item
No.Items shown
on M.U.T.-III
screenItemAdjustment items
shown on M.U.T.-III
screenAdjusting contents
4SPEED SEN
WIPVehicle
speed-dependent
wiper functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
9KEYLESS(HA
ZD)Hazard answer
back function of
the keyless entry
systemLOCK/UNLOCKWith function for lock/unlock (the initial
condition)
LOCKEDWith function only for lock
UNLOCKEDWithout function only for unlock
W/O FUNCTIONWithout function
14P UNLOCK
ACT.Door unlock
function linked
with "P" position
shift for centre
door lock systemW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)
15T/SIG.BUZZE
RTurn-signal lamp
operation sound
functionW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-26
16RM LMP TN
OFFDimmer interior
lamp control
duration60s60 seconds
30s30 seconds
15s15 seconds (the initial condition)
7.5s7.5 seconds
W/O FUNCTION0 second (no delay action)
24KEYLES
LOCK TTimer lock time
after executing the
keyless entry
unlock30s30 seconds (the initial condition)
60s1 minute
120s2 minutes
180s3 minutes
26DOOR WARN
BUZDoor-ajar warning
functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
28R.INT WIPER
TRear wiper
intermittent
duration8s8 seconds: Without continuous
operation (Initial setting)
4s(W SUCSSON)4 seconds: With continuous operation
8s(W SUCSSON)8 seconds: With continuous operation
16s(W SUCSSON)16 seconds: With continuous operation
CONTIN ACTIONContinuous operation (without the
intermittence)
37WIP SYCR
WASHWiper linked with
washer functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
38KEYLES
HAZARDCustomise
function for
changing the
number of the
keyless hazard
warning lamp
answerback
flashingLOCK1,UNLOCK2LOCK: Flash once, UNLOCK: Flash
twice (Initial setting)
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
LOCK2,UNLOCK1LOCK: Flash twice, UNLOCK: Flash
once
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
39TURN-SIGNA
LTurn signal lamp
operation
condition
adjustment
functionIG-ONTurn signal lamp can be operated when
the ignition switch is turned ON (Initial
setting).
IG-ACCTurn signal lamp can be operated when
the ignition switch 1 is in ACC or ON
position.
Item
No.Items shown
on M.U.T.-III
screenItem Adjustment items
shown on M.U.T.-III
screenAdjusting contents

GENERAL INFORMATION
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)52B-4
SRS SYSTEM CIRCUIT DIAGRAM
AC401544
Ignition switch (IG1)
Combination
meter (SRS
warning lamp)
No.40
7.5A
Driver's
air bag
module ON
OFF OFF
ON ON
OFF
ON
OFF
ON
ON
OFF
Passenger's
(front)
air bag
moduleClock spring
ON
OFF
OFF ON
OFF ON
OFF
ON
OFF
ON
ON
OFF
ON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Connector
lock switch*
Connector
lock switch* Connector
lock switch*Connector
lock switch*
Seat belt
pre-tensioner
(LH)
Seat belt
pre-tensioner
(RH)
Side-airbag
module
(LH)
Side-airbag
module
(RH)
Curtain air bag
module
(LH)
Curtain air bag
module
(RH) ON
OFF
OFF ON
ON
OFF
ON
ON
OFF
OFFONON
OFF
OFFON
OFF
ON
Connector
lock switch*
Connector
lock switch* Connector
lock switch*
OFFON
OFF
Connector
lock switch*Side impact
sensor (RH)
Side impact
sensor (LH)
Diagnosis
connector
Front impact
sensor (RH)
Front impact
sensor (LH)
Note
*: Connector
connected: ON Connector
disconnected: OFF
AB
SRS-ECU
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
ON
OFF OFF
No.37
7.5A