2006 LEXUS RX330 buttons

For detailed information, refer to the description given in each Section\
.
PICTORIAL INDEX
xivPage
1Driving position memory switches
224
. . . . . . . . . . .
2Power window switches 62
. . . . . . . . . . . . . . . . . . . . . . .
3Power door lock switch 29
. . . . . . . . . . . . . . . . . . . . . . .
4Window lock switch 63
. . . . . . . . . . . . . . . . . . . . . . . . . . .
5Cupholder 112
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6Side vents 257
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7Instrument panel light control knob 90
. . . . . . . . . . . .
8“ODO/TRIP” button 73
. . . . . . . . . . . . . . . . . . . . . . . . . . .
9Ignition switch 385
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10Automatic air conditioning controls 242
. . . . . . . . . .
11Emergency flasher switch 66
. . . . . . . . . . . . . . . . . . . . .
12Multidisplay light control button 91
. . . . . . . . . . . . . .
13Security indicator light 16, 43
. . . . . . . . . . . . . . . . . . . .
14Clock buttons 99
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15Front passenger’s seat belt reminder light 77 . . . . . .
16Multidisplay
Cruise information display 87 . . . . . . . . . . . . . . . . . . .
Outside temperature display 100 . . . . . . . . . . . . . . . .
Clock display 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatic air conditioning display 242 . . . . . . . . . .
17Cruise information display control button 87 . . . . . . .
18“AIRBAG ON” and “AIRBAG OFF”
indicator lights 193. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
19Rear window and outside rear view
mirror defogger, and windshield wiper
deicer switch 61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20Glove box 106
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21Power back door off switch 38
. . . . . . . . . . . . . . . . . . . .
22Automatic transmission selector lever 389, 398 . . . .
23Power outlet (12 VDC) 101
. . . . . . . . . . . . . . . . . . . . . . .
24Height select switch 441
. . . . . . . . . . . . . . . . . . . . . . . . .
25Headlight cleaner switch 60
. . . . . . . . . . . . . . . . . . . . . .
26Driving pattern selector switch 397, 408
. . . . . . . . . . .
27Seat heater switches 67
. . . . . . . . . . . . . . . . . . . . . . . . . .
28Audio system 262, 282
. . . . . . . . . . . . . . . . . . . . . . . . . . .
29Traction control system off switch 451
. . . . . . . . . . .
30Tire pressure warning system reset switch 464 . . . .
31Height control switch 446
. . . . . . . . . . . . . . . . . . . . . . .
32Power outlet (115 VAC) main switch 102
. . . . . . . . . .
33Hood lock release lever 124
. . . . . . . . . . . . . . . . . . . . .
34Parking brake pedal 387
. . . . . . . . . . . . . . . . . . . . . . . . .
35Power back door opener/closer switch 39
. . . . . . . . .
36Easy access mode switch 444
. . . . . . . . . . . . . . . . . . .
37Fuel filler door opener 125
. . . . . . . . . . . . . . . . . . . . . . .
38Adaptive frontlighting system
off switch 51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39Power rear view mirror control switches 231 . . . . . .

KEYS AND DOORS
28
Locking with inside lock button
1Lock2 Unlock
Push the button forward to lock and pull the button
backward to unlock.
The front doors can be opened by pulling the inside handles
even if the lock buttons are in the locked position.
CAUTION
Do not pull the inside handle of the front doors while
driving. The doors will open and an accident may occur.
Lexus strongly recommends that all children be placed
in the rear seat of the vehicle.
Closing the door with the lock button pushed in will also lock the
door. Be careful not to lock your keys in the vehicle. Doors
cannot be locked when either front door is open and the key is
in the ignition.
If the vehicle is subjected to a severe frontal, rear or side impact
with the ignition switch turned to the “ON” position, all the side
doors and back door will unlock automatically after a few
seconds.
CAUTION
Before driving, make sure the doors are closed and
locked, especially when small children are in the
vehicle. Along with the proper use of seat belts, locking
the doors helps prevent the driver and passengers from
being thrown out from the vehicle in an accident. It also
helps prevent the doors from being opened
unintentionally.

KEYS AND DOORS
29
Locking with power door lock switch
1Lock2Unlock
To lock all the side doors and back door simultaneously,
push the power door lock switch down on the front side.
Pushing down on the rear side will unlock them.
The same switch is also located on the front passenger’s side.
If you do any of the following, no door can be unlocked with the
power door lock switch.
 Lock all the side doors and back door with the key or
wireless remote control when all the side doors and back
door are closed.
 Open the driver’s door or front passenger’s door and move
the inside lock buttons of both front doors to the lock
position, then close the front doors. The power door lock switch can be reset in the following ways.

Turn the ignition key to the “ON” position.
 Unlock all the side doors and back door with the key or
wireless remote control.
 Unlock the driver’s door or front passenger’s door with the
inside lock button, and then unlock all the side doors and
back door with the power door lock switch.
Automatic door locking and unlocking
functions
AUTOMATIC DOOR LOCKING
You can select the following functions:
Locking linked with the shift position
All doors are automatically locked when the selector lever
is moved out of “P” position.
 Locking linked with vehicle speed
All doors are automatically locked when the vehicle speed
goes above about 20 km/h (12 mph).
You can set or cancel the automatic door locking
functions:
Be sure to apply the parking brake when performing the
following operations.

INTERIOR EQUIPMENT
107
GARAGE DOOR OPENER
The garage door opener ( Universal
Transceiver) is manufactured under license from
HomeLink
 and can be programmed to operate garage
doors, gates, entry doors, door locks, home lighting
systems, and security systems, etc.
(a) Programming the HomeLink
1Buttons2Indicator light
The HomeLink
 in your vehicle has 3 buttons and you can
store one program for each button.
To ensure correct programming into the HomeLink
, install a
new battery in the hand −held transmitter prior to programming. The battery side of the hand
−held transmitter must be pointed
away from the HomeLink
 during the programming process.
For Canadian users, follow the procedure in “Programming an
entrance gate/programming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink
 buttons you want to program.
1HomeLink2Handheld garage transmitter
325 to 75 mm (1 to 3 in.)
2. Place your hand −held garage transmitter 25 to 75 mm (1 to
3 in.) away from the surface of the HomeLink
.
Keep the indicator light on the HomeLink
 in view while
programming.

INTERIOR EQUIPMENT
108
3. Simultaneously press and hold the hand−held garage
transmitter button along with the selected HomeLink button.
Do not release the buttons until step 4 has been completed.
4. When the indicator light on the HomeLink
 changes from a
slow to a rapid flash after 20 seconds, you can release both
buttons.
5. Test the operation of the HomeLink by pressing the newly
programmed button. If programming a garage door opener,
check to see if the garage door opens and closes.
If the garage door does not operate, identify if your garage
transmitter is of the “Rolling Code” type. Press and hold the
programmed HomeLink
 button. The garage door has the
rolling code feature if the indicator light (on the HomeLink)
flashes rapidly and then remains lit after 2 seconds. If your
garage transmitter is the “Rolling Code” type, proceed to the
heading “Programming a rolling code system”.
6. Repeat steps 2 through 5 for each remaining HomeLink

button to program another device.

INTERIOR EQUIPMENT
109
Programming a rolling code system
If your device is “Rolling Code” equipped, it is necessary
to follow steps 1 through 4 under the heading
“Programming the HomeLink
” before proceeding with
the steps listed below.
1. Locate the “training” button on the ceiling mounted garage
door opener motor. The exact location and color of the button
may vary by brand of garage door opener . Refer to the owner’s
guide supplied by the garage door opener manufacturer for the
location of this “training” button.
2. Press the “training” button on the ceiling mounted garage
door opener motor.
Following this step, you have 30 seconds in which to initiate
step 3 below.
3. Press and release the vehicle’s programmed HomeLink

button twice. The garage door may open. If the door does
open, the programming process is complete. If the door does
not open, press and release the button a third time. This third
press and release will complete the programming process by
opening the garage door. The ceiling mounted garage door opener motor should now
recognize the HomeLink
 unit and be able to activate the
garage door up/down.
4. Repeat steps 1 through 3 for each remaining HomeLink

button to program another rolling code system.
Programming an entrance gate/programming
all devices in the Canadian market
1. Decide which of the 3 HomeLink buttons you want to
program.
2. Place your hand −held gate/device transmitter 25 to 75 mm
(1 to 3 in.) away from the surface of the HomeLink
.
Keep the indicator light on the HomeLink
 in view while
programming.
3. Press and hold the selected HomeLink
 button.

INTERIOR EQUIPMENT
11 04. Continuously press and release (cycle) the hand
−held
gate/device transmitter button every two seconds until step 5
is complete.
5. When the indicator light on the HomeLink
 changes from a
slow to a rapid flash after 20 seconds, you can release both
buttons.
6. Test the operation of the HomeLink
 by pressing the newly
programmed button. Check to see if the gate/device operates
correctly.
7. Repeat steps 1 through 6 for each remaining HomeLink

button to program another device.
Programming other devices
To program other devices such as home security systems,
home door locks or lighting, contact your authorized Lexus
dealer for assistance.
Reprogramming a button
Individual HomeLink buttons cannot be erased, however, to
reprogram a single button, follow the procedure “Programming
the HomeLink
”.
(b) Operating the HomeLink
To operate the HomeLink, press the appropriate HomeLink
button to activate the programmed device. The HomeLink
indicator light should come on. The HomeLink continues to
send the signal for up to 20 seconds as long as the button is
pressed.
(c) Erasing the entire HomeLink memory (all
three programs)
To erase all previously programmed codes at one time, press
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored
in the HomeLink
 memory.

OCCUPANT RESTRAINT SYSTEMS
164
Make sure the “AIRBAG ON” indicator light is
illuminated when using the seat belt extender for the
front passenger seat. If the “AIRBAG OFF” indicator
light is illuminated, disconnect the extender tongue
from the seat belt buckle, then reconnect the seat
belt. Reconnect the seat belt extender after making
sure the “AIRBAG ON” indicator light is illuminated.
If you use the seat belt extender while the “AIRBAG
OFF” indicator light is illuminated, the front
passenger airbag and side airbag on the front
passenger side may not activate correctly, causing
death or serious injury in the event of collision.
 Be sure to wear the seat belt without the seat belt
extender if you can fasten the seat belt without the
extender.
 Do not use the seat belt extender when installing a
child restraint system on the front or rear passenger
seat. If installing a child restraint system with the
seat belt extender connected to the seat belt, the seat
belt will not securely hold the child restraint system,
which could cause death or serious injury to the child
or other passengers in the event of collision.
To connect the extender to the seat belt, insert the tab into
the seat belt buckle so that the “PRESS” signs on the
buckle release buttons of the extender and the seat belt
are both facing outward as shown.
You will hear a click when the tab locks into the buckle.
When releasing the seat belt, press on the buckle release
button on the extender, not on the seat belt. This helps prevent
damage to the vehicle interior and extender itself.
As far as the seat belt extender on the front passenger side is
concerned, be sure to disconnect the extender from the seat
belt after the above operation in order to activate the front
passenger airbag correctly when getting into the vehicle next
time.
When not in use, remove the extender and store in the vehicle
for future use.