2006 INFINITI M35 sensor
[x] Cancel search: sensorPage 1461 of 5621
DI-28
UNIFIED METER AND A/C AMP
Revision: 2006 January2006 M35/M45
UNIFIED METER AND A/C AMPPFP:27760
System DescriptionNKS003UG
For the unified meter and A/C amp., the signal required for controlling the combination meter are integrated in
the A/C auto amp.
COMBINATION METER CONTROL FUNCTION
Unified meter and A/C amp. inputs necessary information for combination meter from each unit with CAN
communication and so on.
Unified meter and A/C amp. outputs signals with communication line (TX, RX) between unified meter and
A/C amp. and combination meter.
Unified meter and A/C amp. corresponds a CONSULT-II function (self-diagnostic results, CAN diagnostic
support monitor and data monitor).
Input/output Signals
Between unified meter and A/C amp. and combination meter.
Unit Input from combination meter Output to combination meter
Unified meter and A/C amp.
Refuel status signal
Low-fuel warning lamp condition signal
Delivery destination data signal
Combination meter receive error signal
Combination meter specifications signal
Odo date signal
Vehicle speed signal
Turn indicator signal
High beam request signal
Ring illumination request signal
Position light request signal
Front fog lamp request signal
SET indicator lamp signal
CRUISE indicator lamp signal
Engine speed signal
Fuel level sensor signal (resistance value)
Engine coolant temperature signal
CAN communication condition signal of A/T
A/T position indicator signal
Manual mode indicator signal
A/T CHECK warning lamp signal
AWD warning lamp signal
Low tire pressure warning lamp signal
VDC OFF indicator lamp signal
SLIP indicator lamp signal
ABS warning lamp signal
Brake warning lamp signal
Malfunction indicator lamp signal
Oil pressure switch signal
Door switch signal
Buzzer request signal
ICC warning lamp signal
Meter display signal
AFS OFF indicator signal
Page 1526 of 5621
LANE DEPARTURE WARNING SYSTEM
DI-93
C
D
E
F
G
H
I
J
L
MA
B
DI
Revision: 2006 January2006 M35/M45
NOTE:
When a DTC is detected, the LDW system dose not operate.
When the DTC except “ABNRML TEMP DETECT [C1B03] ” is detected, the LDW indicator lamp turns ON.
When the DTC “ABNRML TEMP DETECT [C1B03] ” is detected, the LDW system ON indicator lamp blinks.
DATA MONITOR
Operation Procedure
1. Touch “DATA MONITOR” on “SELECT DIAG MODE” screen.
2. Touch any of “ALL SIGNALS” and “SELECTION FROM MENU” on selection screen.
3. Touch “START”.
4. Display the data monitor.
5. If necessary, touch “COPY” in turn, and print data.
Display Item List
CAN COMM CIRCUIT [U1000] LDW camera unit detected CAN communication malfunction.DI-98
CONTROL UNIT (CAN) [U1010] LDW camera unit detected internal CAN communication circuit malfunction.DI-98
Display item [Code] Malfunction is detected when...Reference
page
Monitored Item [unit] Description
MAIN SW [ON/OFF] Displays [ON/OFF] status as judged from LDW switch signal.
SW ON LAMP [ON/OFF] Displays [ON/OFF] status of LDW system ON indicator signal output.
INDICATE LAMP [ON/OFF] Displays [ON/OFF] status of LDW indicator signal output.
BUZZER OUTPUT [ON/OFF] Displays [ON/OFF] status of LDW chime operation signal output.
LDW INACCURAT [ON/OFF] Displays LDW camera unit status.
VHCL SPD SE [km/h] or [mph]Displays vehicle speed calculated by LDW camera unit through CAN communication [ABS
actuator and electric unit (control unit) transmits wheel sensor signal through CAN communi-
cation].
VHCL SPD AT [km/h] or [mph]Displays vehicle speed calculated from A/T vehicle speed sensor by LDW camera unit through
CAN communication (TCM transmits A/T vehicle speed sensor signal through CAN communi-
cation).
TURN SIGNAL [OFF/LH/RH] Displays “Turn signal” status, determined from BCM through CAN communication.
LANE DETCT LH [ON/OFF] Displays left lane marker is detected.
LANE DETCT RH [ON/OFF] Displays right lane marker is detected.
CROSS LANE LH [ON/OFF] Displays vehicle is crossing left lane.
CROSS LANE RH [ON/OFF] Displays vehicle is crossing right lane.
WARN LANE LH [ON/OFF] Displays warning for left lane.
WARN LANE RH [ON/OFF] Displays warning for right lane.
VALID POS LH [VLD/INVLD] Displays lateral position for left lane marker is valid.
VALID POS RH [VLD/INVLD] Displays lateral position for right lane marker is valid.
AIMING DONE [OK/NG] Displays camera aiming done.
AIMING RESULT [OK/NOK] Displays camera aiming result.
FCTRY AIM YAW [deg] Displays camera unit installation condition.
FCTRY AIM ROL [deg] Displays camera unit installation condition.
FCTRY AIM PIT [deg] Displays camera unit installation condition.
XOFFSET [pixel] Displays camera unit installation condition.
Page 1544 of 5621
EC-1
ENGINE CONTROL SYSTEM
B ENGINE
CONTENTS
C
D
E
F
G
H
I
J
K
L
M
SECTION EC
A
EC
Revision: 2006 January2006 M35/M45
ENGINE CONTROL SYSTEM
VQ35DE
INDEX FOR DTC ...................................................... 16
DTC No. Index ....................................................... 16
Alphabetical Index .................................................. 20
PRECAUTIONS ........................................................ 24
Precautions for Supplemental Restraint System
(SRS) “AIR BAG” and “SEAT BELT PRE-TEN-
SIONER” ................................................................ 24
Precautions for Procedures without Cowl Top Cover ... 24
On Board Diagnostic (OBD) System of Engine and
A/T .......................................................................... 24
Precaution .............................................................. 25
PREPARATION ......................................................... 28
Special Service Tools ............................................. 28
Commercial Service Tools ...................................... 29
ENGINE CONTROL SYSTEM .................................. 30
System Diagram ..................................................... 30
Multiport Fuel Injection (MFI) System .................... 31
Electronic Ignition (EI) System ............................... 33
Fuel Cut Control (At No Load and High Engine
Speed) .................................................................... 34
AIR CONDITIONING CUT CONTROL ..................... 35
Input/Output Signal Chart ....................................... 35
System Description ................................................ 35
AUTOMATIC SPEED CONTROL DEVICE (ASCD) ... 36
System Description ................................................ 36
Component Description .......................................... 37
CAN COMMUNICATION .......................................... 38
System Description ................................................ 38
EVAPORATIVE EMISSION SYSTEM ....................... 39
Description ............................................................. 39
Component Inspection ........................................... 42
Removal and Installation ........................................ 43
How to Detect Fuel Vapor Leakage ....................... 43
ON BOARD REFUELING VAPOR RECOVERY
(ORVR) ...................................................................... 46
System Description ................................................ 46
Diagnostic Procedure ............................................. 47
Component Inspection ........................................... 49POSITIVE CRANKCASE VENTILATION ................. 51
Description .............................................................. 51
Component Inspection ............................................ 51
IVIS (INFINITI VEHICLE IMMOBILIZER SYSTEM-
NATS) ........................................................................ 53
Description .............................................................. 53
ON BOARD DIAGNOSTIC (OBD) SYSTEM ............ 54
Introduction ..................................................
........... 54
Two Trip Detection Logic ........................................ 54
Emission-Related Diagnostic Information ............... 55
Malfunction Indicator Lamp (MIL) ........................... 69
OBD System Operation Chart ................................ 72
BASIC SERVICE PROCEDURE ............................... 77
Basic Inspection ..................................................... 77
Idle Speed and Ignition Timing Check .................... 82
Idle Mixture Ratio Adjustment ................................. 84
VIN Registration ..................................................... 95
Accelerator Pedal Released Position Learning ...... 95
Throttle Valve Closed Position Learning ................. 95
Idle Air Volume Learning ........................................ 96
Fuel Pressure Check .............................................. 98
TROUBLE DIAGNOSIS ..........................................100
Trouble Diagnosis Introduction .............................100
DTC Inspection Priority Chart ...............................106
Fail-Safe Chart .....................................................108
Symptom Matrix Chart ..........................................109
Engine Control Component Parts Location ..........113
Vacuum Hose Drawing .........................................121
Circuit Diagram .....................................................122
ECM Harness Connector Terminal Layout ...........124
ECM Terminals and Reference Value ...................124
CONSULT-II Function (ENGINE) ..........................133
Generic Scan Tool (GST) Function .......................146
CONSULT-II Reference Value in Data Monitor .....149
Major Sensor Reference Graph in Data Monitor
Mode .....................................................................153
TROUBLE DIAGNOSIS - SPECIFICATION VALUE .155
Description ............................................................155
Testing Condition ..................................................155
Page 1545 of 5621
EC-2Revision: 2006 January2006 M35/M45 Inspection Procedure ...........................................
.155
Diagnostic Procedure ...........................................156
TROUBLE DIAGNOSIS FOR INTERMITTENT INCI-
DENT .......................................................................165
Description ............................................................165
Diagnostic Procedure ...........................................165
POWER SUPPLY AND GROUND CIRCUIT ...........166
Wiring Diagram .....................................................166
Diagnostic Procedure ...........................................167
Ground Inspection ................................................172
DTC U1000, U1001 CAN COMMUNICATION LINE .173
Description ............................................................173
On Board Diagnosis Logic ....................................173
DTC Confirmation Procedure ...............................173
Wiring Diagram .....................................................174
Diagnostic Procedure ...........................................175
DTC U1010 CAN COMMUNICATION .....................176
Description ............................................................176
On Board Diagnosis Logic ....................................176
DTC Confirmation Procedure ...............................176
Diagnostic Procedure ...........................................177
DTC P0011, P0021 IVT CONTROL ........................178
Description ............................................................178
CONSULT-II Reference Value in Data Monitor Mode
.178
On Board Diagnosis Logic ....................................179
DTC Confirmation Procedure ...............................179
Diagnostic Procedure ...........................................180
Component Inspection ..........................................181
Removal and Installation ......................................181
DTC P0031, P0032, P0051, P0052 A/F SENSOR 1
HEATER ..................................................................182
Description ............................................................182
CONSULT-II Reference Value in Data Monitor Mode
.182
On Board Diagnosis Logic ....................................182
DTC Confirmation Procedure ...............................182
Wiring Diagram .....................................................183
Diagnostic Procedure ...........................................186
Component Inspection ..........................................188
Removal and Installation ......................................188
DTC P0037, P0038, P0057, P0058 HO2S2 HEATER .189
Description ............................................................189
CONSULT-II Reference Value in Data Monitor Mode
.189
On Board Diagnosis Logic ....................................189
DTC Confirmation Procedure ...............................190
Wiring Diagram ....................................................
.191
Diagnostic Procedure ...........................................194
Component Inspection ..........................................196
Removal and Installation ......................................196
DTC P0075, P0081 IVT CONTROL SOLENOID
VALVE .....................................................................197
Component Description ........................................197
CONSULT-II Reference Value in Data Monitor Mode
.197
On Board Diagnosis Logic ....................................197
DTC Confirmation Procedure ...............................197
Wiring Diagram .....................................................198Diagnostic Procedure ............................................202
Component Inspection ..........................................204
Removal and Installation .......................................204
DTC P0101 MAF SENSOR .....................................205
Component Description ........................................205
CONSULT-II Reference Value in Data Monitor Mode
.205
On Board Diagnosis Logic ....................................205
DTC Confirmation Procedure ................................206
Overall Function Check .........................................207
Wiring Diagram .....................................................208
Diagnostic Procedure ............................................209
Component Inspection ..........................................212
Removal and Installation .......................................213
DTC P0102, P0103 MAF SENSOR .........................214
Component Description ........................................214
CONSULT-II Reference Value in Data Monitor Mode
.214
On Board Diagnosis Logic ....................................214
DTC Confirmation Procedure ................................215
Wiring Diagram .....................................................216
Diagnostic Procedure ............................................217
Component Inspection ..........................................219
Removal and Installation .......................................220
DTC P0112, P0113 IAT SENSOR ............................221
Component Description ........................................221
On Board Diagnosis Logic ....................................221
DTC Confirmation Procedure ................................221
Wiring Diagram .....................................................223
Diagnostic Procedure ............................................224
Component Inspection ..........................................225
Removal and Installation .......................................225
DTC P0117, P0118 ECT SENSOR ..........................226
Component Description ........................................226
On Board Diagnosis Logic ....................................226
DTC Confirmation Procedure ................................227
Wiring Diagram .....................................................228
Diagnostic Procedure ...........................................
.229
Component Inspection ..........................................230
Removal and Installation .......................................230
DTC P0122, P0123 TP SENSOR ............................231
Component Description ........................................231
CONSULT-II Reference Value in Data Monitor Mode
.231
On Board Diagnosis Logic ....................................231
DTC Confirmation Procedure ................................232
Wiring Diagram .....................................................233
Diagnostic Procedure ............................................234
Component Inspection ..........................................237
Removal and Installation .......................................237
DTC P0125 ECT SENSOR ......................................238
Component Description ........................................238
On Board Diagnosis Logic ....................................238
DTC Confirmation Procedure ................................239
Diagnostic Procedure ............................................239
Component Inspection ..........................................240
Removal and Installation .......................................240
DTC P0127 IAT SENSOR ........................................241
Component Description ........................................241
Page 1546 of 5621
EC-3
C
D
E
F
G
H
I
J
K
L
M
ECA
Revision: 2006 January2006 M35/M45 On Board Diagnosis Logic ...................................241
DTC Confirmation Procedure ...............................241
Diagnostic Procedure ...........................................242
Component Inspection .........................................243
Removal and Installation ......................................243
DTC P0128 THERMOSTAT FUNCTION ................244
On Board Diagnosis Logic ...................................244
DTC Confirmation Procedure ...............................244
Diagnostic Procedure ...........................................244
Component Inspection .........................................245
Removal and Installation ......................................245
DTC P0130, P0150 A/F SENSOR 1 .......................246
Component Description ........................................246
CONSULT-II Reference Value in Data Monitor Mode
.246
On Board Diagnosis Logic ...................................246
DTC Confirmation Procedure ...............................246
Overall Function Check ........................................247
Wiring Diagram ....................................................249
Diagnostic Procedure ...........................................252
Removal and Installation ......................................255
DTC P0131, P0151 A/F SENSOR 1 .......................256
Component Description ........................................256
CONSULT-II Reference Value in Data Monitor Mode
.256
On Board Diagnosis Logic ...................................256
DTC Confirmation Procedure ...............................256
Wiring Diagram ....................................................258
Diagnostic Procedure ...........................................261
Removal and Installation ......................................264
DTC P0132, P0152 A/F SENSOR 1 .......................265
Component Description ........................................265
CONSULT-II Reference Value in Data Monitor Mode
.265
On Board Diagnosis Logic ...................................265
DTC Confirmation Procedure ...............................265
Wiring Diagram ....................................................267
Diagnostic Procedure ...........................................270
Removal and Installation ......................................273
DTC P0133, P0153 A/F SENSOR 1 .......................274
Component Description ........................................274
CONSULT-II Reference Value in Data Monitor Mode
.274
On Board Diagnosis Logic ...................................274
DTC Confirmation Procedure ...............................275
Wiring Diagram ....................................................277
Diagnostic Procedure ...........................................280
Removal and Installation ......................................285
DTC P0137, P0157 HO2S2 ....................................286
Component Description ........................................286
CONSULT-II Reference Value in Data Monitor Mode
.286
On Board Diagnosis Logic ...................................286
DTC Confirmation Procedure ...............................287
Overall Function Check ........................................287
Wiring Diagram ....................................................289
Diagnostic Procedure ...........................................292
Component Inspection .........................................294
Removal and Installation ......................................296DTC P0138, P0158 HO2S2 .....................................297
Component Description ........................................297
CONSULT-II Reference Value in Data Monitor Mode
.297
On Board Diagnosis Logic ....................................297
DTC Confirmation Procedure ...............................298
Overall Function Check ........................................299
Wiring Diagram .....................................................300
Diagnostic Procedure ...........................................303
Component Inspection ..........................................307
Removal and Installation ......................................309
DTC P0139, P0159 HO2S2 .....................................310
Component Description ........................................310
CONSULT-II Reference Value in Data Monitor Mode
.310
On Board Diagnosis Logic ....................................310
DTC Confirmation Procedure ...............................311
Overall Function Check ........................................311
Wiring Diagram .....................................................313
Diagnostic Procedure ...........................................316
Component Inspection ..........................................318
Removal and Installation ......................................320
DTC P0171, P0174 FUEL INJECTION SYSTEM
FUNCTION ..............................................................321
On Board Diagnosis Logic ....................................321
DTC Confirmation Procedure ...............................321
Wiring Diagram .....................................................323
Diagnostic Procedure ...........................................327
DTC P0172, P0175 FUEL INJECTION SYSTEM
FUNCTION ..............................................................332
On Board Diagnosis Logic ....................................332
DTC Confirmation Procedure ...............................332
Wiring Diagram .....................................................334
Diagnostic Procedure ...........................................338
DTC P0181 FTT SENSOR ......................................343
Component Description ........................................343
On Board Diagnosis Logic ....................................343
DTC Confirmation Procedure ...............................343
Wiring Diagram .....................................................345
Diagnostic Procedure ...........................................346
Component Inspection ..........................................348
Removal and Installation ......................................348
DTC P0182, P0183 FTT SENSOR ..........................349
Component Description ........................................349
On Board Diagnosis Logic ....................................349
DTC Confirmation Procedure ...............................349
Wiring Diagram .....................................................350
Diagnostic Procedure ...........................................351
Component Inspection ..........................................353
Removal and Installation ......................................353
DTC P0222, P0223 TP SENSOR ............................354
Component Description ........................................354
CONSULT-II Reference Value in Data Monitor Mode
.354
On Board Diagnosis Logic ....................................354
DTC Confirmation Procedure ...............................355
Wiring Diagram .....................................................356
Diagnostic Procedure ...........................................357
Page 1547 of 5621
EC-4Revision: 2006 January2006 M35/M45 Component Inspection ..........................................360
Removal and Installation ......................................360
DTC P0300 - P0306 MULTIPLE CYLINDER MIS-
FIRE, NO. 1 - 6 CYLINDER MISFIRE .....................361
On Board Diagnosis Logic ....................................361
DTC Confirmation Procedure ...............................361
Diagnostic Procedure ...........................................362
DTC P0327, P0328 KS ............................................371
Component Description ........................................371
On Board Diagnosis Logic ....................................371
DTC Confirmation Procedure ...............................371
Wiring Diagram .....................................................372
Diagnostic Procedure ...........................................373
Component Inspection ..........................................375
Removal and Installation ......................................375
DTC P0335 CKP SENSOR (POS) ..........................376
Component Description ........................................376
CONSULT-II Reference Value in Data Monitor Mode
.376
On Board Diagnosis Logic ....................................376
DTC Confirmation Procedure ...............................377
Wiring Diagram .....................................................378
Diagnostic Procedure ...........................................379
Component Inspection ..........................................382
Removal and Installation ......................................382
DTC P0340, P0345 CMP SENSOR (PHASE) .........383
Component Description ........................................383
CONSULT-II Reference Value in Data Monitor Mode
.383
On Board Diagnosis Logic ....................................383
DTC Confirmation Procedure ...............................383
Wiring Diagram .....................................................385
Diagnostic Procedure ...........................................388
Component Inspection ..........................................391
Removal and Installation ......................................391
DTC P0420, P0430 THREE WAY CATALYST FUNC-
TION ........................................................................392
On Board Diagnosis Logic ....................................392
DTC Confirmation Procedure ...............................392
Overall Function Check ........................................393
Diagnostic Procedure ...........................................394
DTC P0441 EVAP CONTROL SYSTEM .................398
System Description ...............................................398
On Board Diagnosis Logic ....................................398
DTC Confirmation Procedure ...............................398
Overall Function Check ........................................399
Diagnostic Procedure ...........................................400
DTC P0442 EVAP CONTROL SYSTEM .................403
On Board Diagnosis Logic ....................................403
DTC Confirmation Procedure ...............................404
Diagnostic Procedure ...........................................405
DTC P0443 EVAP CANISTER PURGE VOLUME
CONTROL SOLENOID VALVE ...............................412
Description ............................................................412
CONSULT-II Reference Value in Data Monitor Mode
.412
On Board Diagnosis Logic ....................................413
DTC Confirmation Procedure ...............................413
Wiring Diagram .....................................................414Diagnostic Procedure ............................................416
Component Inspection ..........................................419
Removal and Installation .......................................419
DTC P0444, P0445 EVAP CANISTER PURGE VOL-
UME CONTROL SOLENOID VALVE ......................420
Description ............................................................420
CONSULT-II Reference Value in Data Monitor Mode
.420
On Board Diagnosis Logic ....................................421
DTC Confirmation Procedure ................................421
Wiring Diagram .....................................................422
Diagnostic Procedure ............................................424
Component Inspection ..........................................425
Removal and Installation .......................................426
DTC P0447 EVAP CANISTER VENT CONTROL
VALVE ......................................................................427
Component Description ........................................427
CONSULT-II Reference Value in Data Monitor Mode
.427
On Board Diagnosis Logic ....................................427
DTC Confirmation Procedure ................................428
Wiring Diagram .....................................................429
Diagnostic Procedure ............................................430
Component Inspection ..........................................432
DTC P0448 EVAP CANISTER VENT CONTROL
VALVE ......................................................................434
Component Description ........................................434
CONSULT-II Reference Value in Data Monitor Mode
.434
On Board Diagnosis Logic ....................................434
DTC Confirmation Procedure ................................435
Wiring Diagram .....................................................436
Diagnostic Procedure ............................................437
Component Inspection ..........................................438
DTC P0451 EVAP CONTROL SYSTEM PRESSURE
SENSOR ..................................................................440
Component Description ........................................440
CONSULT-II Reference Value in Data Monitor Mode
.440
On Board Diagnosis Logic ....................................440
DTC Confirmation Procedure ................................441
Diagnostic Procedure ............................................441
Component Inspection ..........................................442
DTC P0452 EVAP CONTROL SYSTEM PRESSURE
SENSOR .................................................................
.443
Component Description ........................................443
CONSULT-II Reference Value in Data Monitor Mode
.443
On Board Diagnosis Logic ....................................443
DTC Confirmation Procedure ................................444
Wiring Diagram .....................................................445
Diagnostic Procedure ............................................446
Component Inspection ..........................................448
DTC P0453 EVAP CONTROL SYSTEM PRESSURE
SENSOR ..................................................................450
Component Description ........................................450
CONSULT-II Reference Value in Data Monitor Mode
.450
On Board Diagnosis Logic ....................................450
Page 1548 of 5621
EC-5
C
D
E
F
G
H
I
J
K
L
M
ECA
Revision: 2006 January2006 M35/M45 DTC Confirmation Procedure ...............................451
Wiring Diagram ....................................................452
Diagnostic Procedure ...........................................453
Component Inspection .........................................457
DTC P0455 EVAP CONTROL SYSTEM ................458
On Board Diagnosis Logic ...................................458
DTC Confirmation Procedure ...............................459
Diagnostic Procedure ...........................................460
DTC P0456 EVAP CONTROL SYSTEM ................466
On Board Diagnosis Logic ...................................466
DTC Confirmation Procedure ...............................467
Overall Function Check ........................................468
Diagnostic Procedure ...........................................469
DTC P0460 FUEL LEVEL SENSOR ......................475
Component Description ........................................475
On Board Diagnosis Logic ...................................475
DTC Confirmation Procedure ...............................475
Diagnostic Procedure ...........................................476
Removal and Installation ......................................476
DTC P0461 FUEL LEVEL SENSOR ......................477
Component Description ........................................477
On Board Diagnosis Logic ...................................477
Overall Function Check ........................................477
Diagnostic Procedure ...........................................478
Removal and Installation ......................................478
DTC P0462, P0463 FUEL LEVEL SENSOR CIR-
CUIT ........................................................................479
Component Description ........................................479
On Board Diagnosis Logic ...................................479
DTC Confirmation Procedure ...............................479
Diagnostic Procedure ...........................................480
Removal and Installation ......................................480
DTC P0500 VSS .....................................................481
Description ...........................................................481
On Board Diagnosis Logic ...................................481
DTC Confirmation Procedure ...............................481
Overall Function Check ........................................482
Diagnostic Procedure ...........................................482
DTC P0506 ISC SYSTEM .......................................483
Description ...........................................................483
On Board Diagnosis Logic ...................................483
DTC Confirmation Procedure ...............................483
Diagnostic Procedure ...........................................484
DTC P0507 ISC SYSTEM .......................................485
Description ...........................................................485
On Board Diagnosis Logic ...................................485
DTC Confirmation Procedure ..............................
.485
Diagnostic Procedure ...........................................486
DTC P0550 PSP SENSOR .....................................487
Component Description ........................................487
CONSULT-II Reference Value in Data Monitor Mode
.487
On Board Diagnosis Logic ...................................487
DTC Confirmation Procedure ...............................487
Wiring Diagram ....................................................488
Diagnostic Procedure ...........................................489
Component Inspection .........................................491
Removal and Installation ......................................491DTC P0603 ECM POWER SUPPLY .......................492
Component Description ........................................492
On Board Diagnosis Logic ....................................492
DTC Confirmation Procedure ...............................492
Wiring Diagram .....................................................493
Diagnostic Procedure ...........................................494
DTC P0605 ECM .....................................................496
Component Description ........................................496
On Board Diagnosis Logic ....................................496
DTC Confirmation Procedure ...............................496
Diagnostic Procedure ...........................................497
DTC P0643 SENSOR POWER SUPPLY ................499
On Board Diagnosis Logic ....................................499
DTC Confirmation Procedure ...............................499
Wiring Diagram .....................................................500
Diagnostic Procedure ...........................................502
DTC P0850 PNP SWITCH ......................................504
Component Description ........................................504
CONSULT-II Reference Value in Data Monitor Mode
.504
On Board Diagnosis Logic ....................................504
DTC Confirmation Procedure ...............................504
Overall Function Check ........................................505
Wiring Diagram .....................................................506
Diagnostic Procedure ...........................................507
DTC P1148, P1168 CLOSED LOOP CONTROL ....509
On Board Diagnosis Logic ....................................509
DTC P1211 TCS CONTROL UNIT ..........................510
Description ............................................................510
On Board Diagnosis Logic ....................................510
DTC Confirmation Procedure ...............................510
Diagnostic Procedure ...........................................510
DTC P1212 TCS COMMUNICATION LINE ............511
Description ............................................................511
On Board Diagnosis Logic ....................................511
DTC Confirmation Procedure ...............................511
Diagnostic Procedure ...........................................511
DTC P1217 ENGINE OVER TEMPERATURE .......
.512
Description ............................................................512
CONSULT-II Reference Value in Data Monitor Mode
.513
On Board Diagnosis Logic ....................................513
Overall Function Check ........................................513
Wiring Diagram .....................................................515
Diagnostic Procedure ...........................................517
Main 12 Causes of Overheating ...........................522
Component Inspection ..........................................524
DTC P1220 FUEL PUMP CONTROL MODULE
(FPCM) ....................................................................525
Description ............................................................525
CONSULT-II Reference Value in Data Monitor Mode
.525
On Board Diagnosis Logic ....................................525
DTC Confirmation Procedure ...............................526
Wiring Diagram .....................................................527
Diagnostic Procedure ...........................................528
Component Inspection ..........................................532
DTC P1225 TP SENSOR ........................................533
Component Description ........................................533
Page 1549 of 5621
EC-6Revision: 2006 January2006 M35/M45 On Board Diagnosis Logic ....................................533
DTC Confirmation Procedure ...............................533
Diagnostic Procedure ...........................................534
Removal and Installation ......................................534
DTC P1226 TP SENSOR ........................................535
Component Description ........................................535
On Board Diagnosis Logic ....................................535
DTC Confirmation Procedure ...............................535
Diagnostic Procedure ...........................................536
Removal and Installation ......................................536
DTC P1550 BATTERY CURRENT SENSOR ..........537
Component Description ........................................537
CONSULT-II Reference Value in Data Monitor Mode
.537
On Board Diagnosis Logic ....................................537
DTC Confirmation Procedure ...............................538
Wiring Diagram .....................................................539
Diagnostic Procedure ...........................................540
Component Inspection ..........................................542
D T C P 1 5 5 1 , P 1 5 5 2 B A T T E R Y C U R R E N T S E N S O R .543
Component Description ........................................543
CONSULT-II Reference Value in Data Monitor Mode
.543
On Board Diagnosis Logic ....................................543
DTC Confirmation Procedure ...............................544
Wiring Diagram .....................................................545
Diagnostic Procedure ...........................................546
Component Inspection ..........................................548
DTC P1553 BATTERY CURRENT SENSOR ..........549
Component Description ........................................549
CONSULT-II Reference Value in Data Monitor Mode
.549
On Board Diagnosis Logic ....................................549
DTC Confirmation Procedure ...............................550
Wiring Diagram .....................................................551
Diagnostic Procedure ...........................................552
Component Inspection ..........................................554
DTC P1554 BATTERY CURRENT SENSOR ..........555
Component Description ........................................555
CONSULT-II Reference Value in Data Monitor Mode
.555
On Board Diagnosis Logic ....................................555
Overall Function Check ........................................556
Wiring Diagram .....................................................557
Diagnostic Procedure ...........................................558
Component Inspection ..........................................560
DTC P1564 ICC STEERING SWITCH ....................561
Component Description ........................................561
CONSULT-II Reference Value in Data Monitor Mode
.561
On Board Diagnosis Logic ....................................561
DTC Confirmation Procedure ...............................562
Wiring Diagram ................................................
.....563
Diagnostic Procedure ...........................................564
Component Inspection ..........................................567
DTC P1564 ASCD STEERING SWITCH ................568
Component Description ........................................568
CONSULT-II Reference Value in Data Monitor Mode
.568On Board Diagnosis Logic ....................................568
DTC Confirmation Procedure ................................569
Wiring Diagram .....................................................570
Diagnostic Procedure ............................................571
Component Inspection ..........................................574
DTC P1568 ICC FUNCTION ...................................575
On Board Diagnosis Logic ....................................575
DTC Confirmation Procedure ................................575
Diagnostic Procedure ............................................575
DTC P1572 ICC BRAKE SWITCH ..........................576
Component Description ........................................576
CONSULT-II Reference Value in Data Monitor Mode
.576
On Board Diagnosis Logic ....................................576
DTC Confirmation Procedure ................................577
Wiring Diagram .....................................................578
Diagnostic Procedure ............................................579
Component Inspection ..........................................584
DTC P1572 ASCD BRAKE SWITCH ......................585
Component Description ........................................585
CONSULT-II Reference Value in Data Monitor Mode
.585
On Board Diagnosis Logic ....................................585
DTC Confirmation Procedure ................................586
Wiring Diagram .....................................................587
Diagnostic Procedure ............................................588
Component Inspection ..........................................592
DTC P1574 ICC VEHICLE SPEED SENSOR .........593
Component Description ........................................593
On Board Diagnosis Logic ....................................593
DTC Confirmation Procedure ................................593
Diagnostic Procedure ............................................594
DTC P1574 ASCD VEHICLE SPEED SENSOR .....595
Component Description ........................................595
On Board Diagnosis Logic ....................................595
DTC Confirmation Procedure ................................595
Diagnostic Procedure ............................................596
DTC P1715 INPUT SPEED SENSOR (TURBINE
REVOLUTION SENSOR) ........................................597
Description ............................................................597
CONSULT-II Reference Value in Data Monitor Mode
.597
On Board Diagnosis Logic ....................................597
Diagnostic Procedure ..........................................
..597
DTC P1805 BRAKE SWITCH .................................598
Component Description ........................................598
CONSULT-II Reference Value in Data Monitor Mode
.598
On Board Diagnosis Logic ....................................598
DTC Confirmation Procedure ................................599
Wiring Diagram .....................................................600
Diagnostic Procedure ............................................601
Component Inspection ..........................................606
DTC P2100, P2103 THROTTLE CONTROL MOTOR
RELAY .....................................................................607
Component Description ........................................607
CONSULT-II Reference Value in Data Monitor Mode
.607
On Board Diagnosis Logic ....................................607