2006 HONDA ODYSSEY Engine oil

[x] Cancel search: Engine oil

Page 284 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual Bef ore you begin driving your
vehicle, you should know what
gasoline to use and how to check the
levels of important f luids. You also
need to know how to properly store
luggage or packages. The
inf

Page 285 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual Help assure your vehicle’s f uture
reliability and perf ormance by paying
extra attention to how you drive
during the f irst 600 miles (1,000 km).
During this period:Avoid full-throttle starts and r

Page 288 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual Wait a f ew minutes af ter turning the
engine of f bef ore you check the oil.Remove the dipstick again, and
check the level. It should be
between the upper and lower
marks.
To close the hood, lif t it

Page 320 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual This section explains why it is
important to keep your vehicle well
maintained and how to f ollow basic
maintenance saf ety precautions.
This section also includes
instructions on how to read the
main

Page 322 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual Your vehicle displays engine oil lif e
and maintenance service items in the
odometer/trip meter display on LX,
EX and EX-L models, or in the multi-
inf ormation display on Touring
models, to show you

Page 323 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual When the remaining engine oil lif e is
less than 5 percent, you will see a
‘‘CHANGE OIL’’ message in the
odometer/trip meter display, along
with the same maintenance item
code(s), every time y

Page 324 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual µ
CONT INUED
When the remaining engine oil lif e is
15 percent or less, the display shows
a ‘‘SERVICE DUE SOON’’ message
along with the maintenance item
code(s) f or other scheduled
maintena

Page 325 of 420

HONDA ODYSSEY 2006 RB1-RB2 / 3.G Owners Manual These messages will come on every
time you turn the ignition switch to
the ON (II) position.
Immediately have the service
perf ormed, and make sure to reset
the display as described on page .
You can