2006 FORD GALAXY lock

Engine - \b.0L \furatorq-T\fCi (85kW/115PS) -
\fW/\b.0L \furatorq-T\fCi (100kW/136PS) -
\fW/\b.0L \furatorq-T\fCi (103kW/140PS) - \fW,
Emission Requirements: Stage IV - Engine
Accessories
S-MAX/G\bl\bxy\f2006.5\f(02/2006
Installation
Special Tool(s)
205-044-01\f
Ad\bpter\ffor\f205-044\f
303-1059\f
Alignment\fPeg,\fCr\bnksh\bft\f
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-174\f
G\buge,\fBolt\fAngle\f
303-254\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-04\f
Mounting\fBr\bcket\ffor\f303-435\f
303-435-12A\f
Mounting\fPl\bte\ffor\f303-435-04
\f
303-735\f
Alignment\fPeg,\fC\bmsh\bft\f
308-204\f
Aligner,\fClutch\fDisc\f1.
NOTE:\fThe\fg\bskets\f\bre\fto\fbe\freused\funless\fd\bm\bged
1.Torque:\b 9\fNm\f
2. Torque:\b 20\fNm
\f
\f
\f
\f
\f
\f
\f
\f
\f
\f
\f
Стр. 1 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837775&gui...procarmanuals.com
http://vnx.su

20. Remove\fthe\fspeci\bl\ftool.\fSpec\fal\bTool(s):\b 303-1059\f
21 .
CAUTION:\fOnly\frot\bte\fthe\fcr\bnksh\bft\fclockwise.
Rot\bte\fthe\fcr\bnksh\bft\f4\frevolutions.\f
22. Inst\bll\fthe\fspeci\bl\ftool.\f
Spec\fal\bTool(s):\b 303-1059\f
23.
NOTE:\fThe\fspeci\bl\ftool\fc\bn\fonly\fbe\finst\blled\fif\fthe\fv\blve\f
timing\fis\fcorrect.\f
Inst\bll\fthe\fspeci\bl\ftool.\f
Sp
ec\fal\bTool(s):\b 303-735\f
24.

\f
25. Remove\fthe\fspeci\bl\ftool.\f Spec\fal\bTool(s):\b 303-735\f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 6 из
11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G837775&gui...procarmanuals.com
http://vnx.su

0.061.4949
0.071.4747
0.091.4545
0.11.4343
0.111.4141
0.121.4141
0.131.3939
0.141.3737
0.151.3535
0.161.3535
0.171.3333
0.181.3131
0.191.2929
0.21.2929
0.211.2727
0.221.2525
0.231.2323
0.241.2323
0.251.2121
0.261.1919
>0.261.1919
I\be\fN\f
Cylinder\fBlock\fbl\bnking\fplug42
Стр. 2 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1043350&gu...procarmanuals.com
http://vnx.su

Engine - \b.\bL D\fratorq-TDCi
(1\b9kW/175PS) - DW - Engine - OverviewS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Description and Operation
The\f2.2L\fDur\btorq-TDCi\f(DW)\fdiesel\fengine\fextends\fthe\fr\bnge\fof\fTDCi\f4-cylinder\f
tu

rboch\brged\fdiesel\fengines.\f
Feat\fres

4-cylinder\fturbodiesel\fin-line\fengine\fwith\ftwo\foverhe\bd\fc\bmsh\bfts\f\bnd\f16\fv\blve\f
te

chnology\f\f

C\bst\firon\fcylinder\fblock\fwith\fc\bst-in\fcylinder\fliners\f\f

L\bdder\ffr\bme\ffor\fextending\fthe\fcylinder\fblock\f\f

B\bl\bnce\fsh\bft\funit\ffor\foptimum\frunning\fsmoothness\f\f

Two-p\brt\fcylinder\fhe\bd\fm\bde\ffrom\f\bluminium\f\f

Exh\bust\fc\bmsh\bft\fdriven\fby\f\b\ftiming\fbelt\f\f

Int\bke\fc\bmsh\bft\fdriven\fvi\b\f\b\ftiming\fch\bin\f(driven\fby\fthe\fexh\bust\fc\bmsh\bft)\f\f

V\blves\f\bctu\bted\fby\froller\fc\bm\ffollowers\fwith\fhydr\bulic\ft\bppets\f\f

Swirl\f\bnd\fch\brge\fducts\ffor\foptimum\fcombustion\funder\f\bll\foper\bting\fconditions\f\f

V\bri\bble-geometry\fturboch\brger\ffor\foptimum\fcylinder\fch\brging\f
F\fel system
Bosch\fcommon\fr\bil\fsystem\fwith\fm\bximum\ffuel\fpump\fpressure\fof\f1600\fb\br\f(\blso\fup\fto\f
18

00\fb\br\ffor\f\b\flimited\ftime)\f\f

Fuel\finjectors\fwith\fpiezo\ftechnology\f\f

Electric\ffuel\fpump\ffor\f\bssisting\fwith\ffilling\fof\fthe\fswirl\fpot\fin\fthe\ffuel\ft\bnk\f
Engine management
Bosch\f PCM\f(powertr\bin\fcontrol\fmodule) \f
EDC16CP39\f\f

Fuel\fmetering\fv\blve,\ffuel\fpressure\fregul\btor\f\bnd\ffuel\fpressure\fsensor\ffor\fefficient\f
re

gul\btion\fof\fthe\ffuel\fpressure\f\f

Turboch\brger\fv\bri\bble\fv\bne\felectric\bl\f\bctu\btor\f\f

Actu\btor\fmotor-controlled\f EGR
\f(exh\bust\fg\bs\frecircul\btion)\fv\blve\f\f

Actu\btor\fmotor-controlled\fint\bke\fm\bnifold\ffl\bp\fwith\fposition\fsensor\f\f

gener\btor\fcontrol\fvi\b\fLIN\fd\bt\b\fbus\fsystem\f\f

Oil\ftemper\bture\fsensor\f\bs\f\bn\finput\fv\bri\bble\ffor\fc\blcul\bting\fthe\foil\fqu\blity\f
Engine-emission control
Meets\fEURO\fIV\f\f

Actu\btor\fmotor-controlled\f EGR\f
v\blve\f\f

Int\bke\fm\bnifold\ffl\bp\fwith\fposition\fsensor\f\f

Bro\bdb\bnd\fL\bmbd\b\fprobe\ffor\fcorrecting\fthe\finjection\fvolume\f\bnd\ffor\foptimizing\fthe\f EGR\f
\f

Co\bted\f DPF\f(diesel\fp\brticul\bte\ffilter) \f
to\fminimize\frust\fp\brticle\femissions\f
Diagnosis
Vi\b\fthe\f DLC\f(d\bt\b\flink\fconnector) w
ith\fIDS\f(Integr\bted\fDi\bgnostic\fSystem) \f
Specification
T o

rque\f\bnd\fpower\foutput:\f
Стр. 1 из 3
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1048761&gu...procarmanuals.com
http://vnx.su

\f\fDescription
V\blve\fcover\f
Cylinder\fhe\bd\f-\fupper\fp\brt\f
Cylinder\fhe\bd\f-\flower\fp\brt\f
Cylinder\fblock\f
Oil\fp\bn\fextension\f
Oil\fsump\f
Item
1
2
3
4
5
6
\f
Стр. 3 из 3
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1048761&gu...procarmanuals.com
http://vnx.su

T\fe intake cams\faft is driven by t\fe ex\faust cams\faft via a timing c\fain.
Pretensi\bning \bf t\fe timing c\fain is perf\brmed by a \fydraulic timing c\fain tensi\bner.
Hydra\flic timing chain tensioner
T\fe \fydraulic timing c\fain tensi\bner is m\bunted between t\fe cams\faft spr\bckets \bn t\fe upper part \bf t\fe cylinder \fead.
T\fe \fydraulic c\fain tensi\bner is supplied wit\f t\fe appr\bpriate \bil pressure via an \bil b\bre. Als\b integrated in t\fe \fydraulic
timing c\fain tensi\bner is a c\bmpressi\bn spring. T\fis ensures t\fe necessary pretensi\bning \bf t\fe drive c\fain.
T\fere is a service pin at t\fe c\fain tensi\bner f\br releasing t\fe pretensi\bn during servicing.
Locking and disengaging the hydra\flic timing chain tensioner

Description
C\fain tensi\bner l\bcked
C\fain tensi\bner disengaged
Service pin
Upper c\fain guide
L\bwer c\fain guide
NOTE: After installing t\fe upper part \bf t\fe cylinder \fead, make sure t\fat t\fe \fydraulic c\fain tensi\bner is in t\fe
disengaged p\bsiti\bn.
T\fe c\fain tensi\bner can be l\bcked and disengaged again
f\br servicing using t\fe service pin.
T\b l\bck t\fe c\fain tensi\bner, lift t\fe service pin and t\fen turn it 90 degrees.
T\b pretensi\bn t\fe c\fain tensi\bner, turn t\fe service pin \bnce m\bre by 90 degrees. T\fe unl\bcking can be clearly felt.
Cylinder block Item
A
B1
2
3


Стр. 7 из 21
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1048763&gu...procarmanuals.com
http://vnx.su

NOTE: Cylinder 1 is l\bcated \bn t\fe transaxle side \bf t\fe engine.
T\fe cylinder bl\bck is made fr\bm grey cast ir\bn and is
d\buble-walled. T\fis \felps t\b ac\fieve \fig\f strengt\f. It als\b f\brms a
blanket \bf air t\fat results in c\bnsiderable s\bund insulati\bn.
T\fe serial number \bf t\fe engine and t\fe engine c\bde are l\bcated \bn t\fe intake side \bf t\fe cylinder bl\bck (in line wit\f t\fe
sec\bnd cylinder).
T\fe running surfaces \bf t\fe cylinders are w\brked directly int\b t\fe cylinder bl\bck.
T\fere are tw\b \f\bles \bn t\fe cylinder bl\bck f\br t\fe guide bus\fings f\br securing t\fe cylinder \fead gasket and t\fe cylinder \fead.
Oil Spray Jets

Description
Oil spray n\bzzle retaining b\blt
Oil spray jet (4 \bff)
T\fe efficient c\bmbusti\bn pr\bvided by t\fe direct-
injecti\bn turb\bc\farged diesel engine means t\fat \fig\f temperatures are
transmitted t\b t\fe pist\bns.
T\fere is an \bil spray n\bzzle installed at t\fe l\bwer end \bf eac\f cylinder liner f\br c\b\bling t\fe pist\bns. T\fe \bil spray n\bzzles spray
engine \bil in a targeted manner under t\fe pist\bn cr\bwns.
T\fere are \bil passages integrated in t\fe pist\bn cr\bwns. T\fe sprayed engine \bil enters t\fese \bil passages and t\fus ensures t\fe
necessary pist\bn c\b\bling. Pist\bn c\b\bling is n\bt essential w\fen t\fe engine is c\bld. Lubricati\bn \bf t\fe crank gear and cams\faft
\fas a \fig\fer pri\brity \fere. F\br t\fis reas\bn, t\fe \bil spray n\bzzles \bnly \bpen if an \bil pressure \bf m\bre t\fan 0.5 bar is present at
t\fem.
Cylinder block extension Item
1
2


Стр. 8 из 21
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1048763&gu...procarmanuals.com
http://vnx.su

REFER\fto:\fSpecific\btions \f(303-01G\fEngine\f
-\f2.2L\fDur\btorq-TDCi\f(129kW/175PS)\f-\f
DW,\fSpecific\btions).\f
F\bulty\fpositive\fcr\bnkc\bse\f
ventil\btion\f(PCV)\fsystem.\f Hoses\for\fventil\btion\for\f
bre\bther\fv\blves\f\bre\fblocked.\f
This\fc\buses\fexcessive\f
pressure\fin\fthe\fcr\bnkc\bse\f
which\fc\buses\fmore\foil\fto\f
enter\fthe\fcombustion\f
ch\bmber.\fPCV\foil\fsep\br\btor\fis\ff\bulty\f
\bnd\fengine\foil\fc\bn\fenter\fthe\f
combustion\fch\bmber\f
through\fthe\fint\bke\f
m\bnifold.\f
*
-
-
CHECK\fif\fthe\fPCV\fsystem\fis\foper\bting\f
correctly\f\bnd\frep\bir\f\bs\fnecess\bry.\fREFER\f
to:\f Engine\fEmission\fControl \f(303-08E\f
Eng

ine\fEmission\fControl\f-\f2.2L\fDur\btorq-
TDCi\f(129kW/175PS)\f-
\fDW,\fDi\bgnosis\f\bnd\f
Testing).\f
*
Turboch\brger\fse\bls.\f
*INSTALL\f\b\fnew\fturboch\brger.\fREFER\fto:\f
Turboch\brger \f(303-
04K\fFuel\fCh\brging\f\bnd\f
Controls\f-\fTurboch\brger\f-\f2.2L\fDur\btorq-
TDCi\f(129kW/175PS)\f-\fDW,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
*
D\bm\bged\fg\bskets\for\f
m\bting\fsurf\bces.\f Cylinder\fhe\bd\fg\bsket\fis\f
d\bm\bged\for\fm\bting\ff\bce\f\bre\f
w\brped.\fV\blve\fstem\fse\bls\f\bre\fworn\f
\bnd\fengine\foil\fc\bn\fenter\fthe\f
combustion\fch\bmber\f
between\fthe\fv\blve\fstem\f\bnd\f
the\fv\blve\fstem\fguide.\f
*
-
-
CHECK\fthe\fg\bskets\f\bnd\fm\bting\fsurf\bces\f
for\fd\bm\bge.\f Remove\fthe\fcylinder\fhe\bd.\fREFER\fto:\f
Cylinder\fHe\bd\f(303-01G\fEngine\f-\f2.2L\f
Dur

\btorq-TDCi\f(129kW/175PS)\f-\fDW,\f
Remov\bl\f\bnd\fInst\bll\btion).CHECK\fthe\f
m\bting\ff\bces,\fcylinder\fhe\bd\fg\bsket\f\bnd\f
the\fevenness\fof\fthe\fcylinder\fhe\bd\f\bnd\f
engine\fblock\fm\bting\ff\bces.\f INSTALL\fnew\fv\blve\fse\bls.\fREFER\fto:\f
V\blve\fStem\fSe\bls \f(303-01G\fEngine\f-\f2.2L\f
Dur

\btorq-TDCi\f(129kW/175PS)\f-\fDW,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
*
-
-
Piston\fring\for\fcylinder\fliner\f
we\br.\f
*INSTALL\fnew\fcomponents\f\bs\fnecess\bry.\f
*
D\bm\bged\fcylinder\fliners\for\f
excessive\fcle\br\bnce\fof\f
engine\fcomponents.\f Pistons.\f
Piston\frings\f(cle\br\bnce\fin\f
groove\f\bnd\fend\fg\bp).\f
Cylinder\fliners.\f
*
-
-
-CHECK\fthe\frunning\fsurf\bces\f\bnd\f
cle\br\bnces\fof\fthe\findividu\bl\fengine\f
components.\fINSTALL\fnew\fcomponents\f\bs\f
necess\bry.\fINSTALL\f\b\fnew\fcylinder\fblock\f
if\fnecess\bry.\f Check\fthe\fpistons\f\bnd\fpiston\frings.\f\f
*
*
Cool\bnt\f
consumptionCooling\fsystem\f
components.\f
*Check\fthe\fcooling\fsystem\fcomponents.\f
REFER\fto:\f Engine\fCooling \f(303-03F\f
Eng

ine\fCooling\f-\f2.2L\fDur\btorq-TDCi\f
(129kW/175PS)\f-\fDW,\fDi\bgnosis\f\bnd\f
Testing).\f
*
Oil\fcooler.\f
*INSTALL\f\b\fnew\foil\fcooler.\f
*
D\bm\bged\fg\bskets\for\f
w\brped\fm\bting\ff\bces.\f
*CHECK\fthe\fcylinder\fhe\bd\fg\bsket\ffor\f
d\bm\bge.\fCHECK\fthe\fcylinder\fhe\bd\ffor\f
distortion.\f
*
Cr\bcks\for\ffr\bctures\fin\f
engine\fcomponents\f
surrounded\fby\fcool\bnt,\fsuch\f
\bs\fcylinder\fliners\f\bnd\f
cylinder\fhe\bd\fcombustion\f
ch\bmber.\f
*
DETERMINE\fthe\fd\bm\bged\fengine\f
component(s)\f\bnd\finst\bll\fnew\fcomponent
(s)\f\bs\fnecess\bry.\f
*
Engine\fwill\fnot\fB\bttery\for\fc\bbles.\f
*CHECK\fthe\fb\bttery,\fbr\bcket\f\bnd\fc\bbles.\f\f
*
Стр. 2 из 12
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1104972&gu...procarmanuals.com
http://vnx.su