2006 DODGE POWER WAGON fuel

[x] Cancel search: fuel

Page 321 of 467

DODGE POWER WAGON 2006 2.G Owners Manual CAUTION!
Damage to the fuel system or emission control
system could result from using an improper fuel
tank filler tube cap (gas cap). A poorly fitting cap
could let impurities into the fuel system.
W

Page 322 of 467

DODGE POWER WAGON 2006 2.G Owners Manual •When pulling a heavy load or driving a fully loaded
vehicle when the humidity is low and the temperature
is high, use a premium unleaded fuel to help prevent
spark knock. If spark knock persists, l

Page 323 of 467

DODGE POWER WAGON 2006 2.G Owners Manual •Guard against carbon monoxide with proper mainte-
nance. Have the exhaust system inspected every time
the vehicle is raised. Have any abnormal conditions
repaired promptly. Until repaired, drive wi

Page 325 of 467

DODGE POWER WAGON 2006 2.G Owners Manual rear axle systems (GAWR). Total load must be limited so
GVWR and front and rear GAWR are not exceeded.
Payload
The payload of a vehicle is defined as the allowable load
weight a truck can carry, inclu

Page 338 of 467

DODGE POWER WAGON 2006 2.G Owners Manual NOTE:Check the automatic transmission fluid level
before towing.
Towing Tips — Tow/Haul (If Equipped)
To reduce potential for automatic transmission overheat-
ing, turn the “TOW HAUL OD/OFF” fea

Page 345 of 467

DODGE POWER WAGON 2006 2.G Owners Manual WHAT TO DO IN EMERGENCIES
CONTENTS
Hazard Warning Lights..................346
Adding Fuel..........................347
Jack Location..........................348
▫All Models......................

Page 347 of 467

DODGE POWER WAGON 2006 2.G Owners Manual ADDING FUEL
The fuel tank filler tube has a restricting door about 2
inches (50 mm) inside the opening. If using a portable
fuel container, it should have a flexible nozzle long
enough to force open t

Page 363 of 467

DODGE POWER WAGON 2006 2.G Owners Manual MAINTAINING YOUR VEHICLE
CONTENTS
Engine Compartment— 5.7L...............366
Onboard Diagnostic System (OBD II).........367
Emissions Inspection And Maintenance
Programs..........................