2006 CHRYSLER TOWN AND COUNTRY window

[x] Cancel search: window

Page 114 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual •low road noise,
•smooth road surface,
•fully closed windows,
•dry weather condition.
•Even though the system is designed for users speaking 
in North American English, French, and Spanish a

Page 115 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual Far End Audio Performance 
•
Audio quality is maximized under:
•low-to-medium blower setting,
•low-to-medium vehicle speed,
•low road noise,
•smooth road surface,
•fully closed windows, an

Page 158 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual When the driver selects Reverse the system scans for 
objects behind the vehicle using four sensors located in
the rear bumper. Objects can be detected from up to 59
inches (150 cm). A warning display

Page 173 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual Power Accessory Delay
When this feature is selected, accessory power will be 
supplied for up to 45 seconds for the power windows,
radio, power vent windows, power outlets, and remov-
able center cons

Page 180 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual To close the sunroof, hold the switch in the forward 
position. Again, any release of the switch will stop the
movement and the sunroof will remain in a partial open
condition until the switch is push

Page 181 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual the rear windows open, open the front and rear windows 
together to minimize the buffeting. If the buffeting occurs
with the sunroof open, adjust the sunroof opening to
minimize the buffeting or open

Page 204 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual ▫Front Mode Control ...................281 
▫  Manual Air Conditioning Operation ........285 
▫  Manual Rear Zone Climate Control — 
If Equipped  .........................288 
▫  Automatic T

Page 223 of 496

CHRYSLER TOWN AND COUNTRY 2006 4.G Owners Manual To Set The Radio Push-button Memory
When you are receiving a station that you wish to 
commit to push-button memory, press the SET button.
SET 1 will show in the display window. Select the
push-button
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 56 next >