Troubleshooting Voice Recognition
Words that are in brackets are optional. For example, to change the display to day
mode, “Display day” and “Display day mode” are both valid commands.
When the system recognizes the command, the system will do one of the following:
o Perform the function
o Ask you to confirm your choice by clearly stating “yes” or “no”,
o Issue an error message such as “System does not recognize this command” or
“Please start speaking after the beep”
If the system is not yet ready, the system may state “System is checking the disc.
Please wait.”
To cancel a command or if the system response does not match your verbal
command, press and hold the talk symbol steering wheel control. The system will
reply, “System will cancel the voice recognition”.
If you experience difficulty with the system recognizing a command, try saying it
more softly, and wait for a few seconds after the beep, or you may just try saying it
again.
Background noise, including airflow noise from wind, may cause voice commands to
be misunderstood. Try closing the window or turning off the air conditioning or
heater.
To use the voice recognition system, the map DVD must be loaded.
Refer to the following for further info:
Storing Voice Tags
Setting a Destination through Voice Recognition
Using Voice Commands
