2006 BMW 7 SERIES Advanced DVD System With Multimedia Changer Retrofit Instalation Instruction Manual

Downloaded from www.Manualslib.com manuals search engine 9 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
3. Connection diagram
Item Designation Signal Cable colour /
Cross-sectionConnection location in the car Abbreviation
/ Slot
I Fan cable --- --- For cars without an additional fan in the boot only ---
I1 Cable eyelet A6 Terminal 31 BR/SW
0.75 mm²To joint connector terminal 31 under the left tail light X13094
I2 3-pin SW socket casing To axial fan BDX2915
I3 4-pin SW socket casing To radial fan ADX14322
I4 Relay socket --- --- --- ---
I5 Socket contact Terminal 30 RT/BL
0.5 mm
2
To the rear fuse holder,
5-pin SW socket casingX4844
PIN 1

I6 Socket contact Terminal R GE/RT
0.5 mm
2
To p o w e r m o d u l e ,
SW 32-pin plugX1856
PIN 18

I
I3I4
I2
I1
I5
I6





Downloaded from www.Manualslib.com manuals search engine 10 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
3. Connection diagram
BVoltage supplyDConnection wiring harness (left seat)
B1WS 4-pin plugD18-pin round plug, SW
B2WS 4-pin plugD28-pin round plug, SW
B3WS 3-pin plugD38-pin round plug GE/BL
D48-pin round plug, BL
CMultimedia changer AV adapter
C18-pin round plug, GNEConnection wiring harness (right
seat)
C2Black 4-pin plugE18-pin round plug, SW
C3Cinch socket GEE28-pin round plug, SW
C4Cinch socket RTE38-pin round plug RT/GE
C5Cinch socket WSE48-pin round plug RT
J
C
D
HH
G
E
G
FF
U
L
D3E3
B2
L5 L1-L3 C3-C5
L4 C2
J2 J1
B3B1 E2
E1F3
F4F1F2
G2AA1
AA1 H2
G1
G2 G1H1
H2 H1
B
F2
F1
F3
D2
D1F4
AA AA
D4E4C1

  

Downloaded from www.Manualslib.com manuals search engine 11 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
3. Connection diagram
FSeat wiring harnessLMultimedia changer
F18-pin round plug, SWL1Cinch plug, WS
F2WS 10-pin plugL2Cinch plug, RT
F38-pin round plug, SWL3Cinch plug, GE
F48-pin round plug, SWL4Black 4-pin plug
L5Black 4-pin plug
GAuxiliary cable
G1Auxiliary jack (2.5 mm)UAV switcher
G28-pin round plug, SW
AAMonitor
HHeadphone cableAA18-pin round plug RT
H1Headphone jack (3.5 mm)
H28-pin round plug RT
JMultimedia changer power supply
cable
J18-pin round plug, SW
J2WS 3-pin plug
J
C
D
HH
G
E
G
FF
U
L
D3E3
B2
L5 L1-L3 C3-C5
L4 C2
J2 J1
B3B1 E2
E1F3
F4F1F2
G2AA1
AA1 H2
G1
G2 G1H1
H2 H1
B
F2
F1
F3
D2
D1F4
AA AA
D4E4C1

  

Downloaded from www.Manualslib.com manuals search engine 12 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
4. Installation and cabling diagram
Legend
BVoltage supply
D Connection wiring harness (left seat, length 5200 mm)
E Connection wiring harness (right seat, length 6700 mm)
L Multimedia changer
UAV switcher
AA Monitor
AD Radial fan
BD Axial fan
1 Power distributor A50
2Earth post X13094
E65E65
1
U
BL2D
E
BD
AD
AA
AA


 

Downloaded from www.Manualslib.com manuals search engine 13 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
5. To install the fan and module holder
For cars without an additional fan in the boot
only
Use cable tie AP to secure filter AE on radial
fan AD.
Secure radial fan AD to holder AJ using Philips
screws AK.
Connect plug holder BC to holder AJ.
Use Allen bolts BE to secure axial fan BD to
holder BH.
Connect plug holder (white) BB to holder BH.
Insert rear vent AB into the side panel.
Affix insulation AO to the boot floor.
Cars without module holder only
Secure rear module holder AZ and front module
holder AY using hexagonal screws R.
Fit speed nuts T to rear module holder AZ and
front module holderAY.
AJAD
AK
AE
AP
BC


 
BB
BH
BE
BD


 
AB
AO




AZ
AY
T
T
T
R



 

Downloaded from www.Manualslib.com manuals search engine 14 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
5. To install the fan and module holder
For cars without an additional fan in the boot
only
Use hexagonal screws R to secure radial fan AD
to rear module holder AZ.
Connect branch I3 to radial fan AD.
Use hexagonal screws R to secure axial fan BD to
front module holder AY.
Connect branch I2 to radial fan BD.
AD
I3
AZ
R
065 0662 Z
AY
BD
I2
R
065 0739 Z

Downloaded from www.Manualslib.com manuals search engine 15 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
6. To install the connection cable and multimedia changer
Push the fabric hose AF over branches D1 and
D2.
Route branches D1 and D2 parallel to plug X275
and secure them with a cable tie AP.
Route branches D3 and D4 to the boot at the rear
left.
Push the fabric hose AF over branches E1 and
E2.
Route branches E1 and E2 parallel to plug X279
and secure them with a cable tie AP.
Route branches E3 and E4 to the boot at the rear
left.
Remove the transport safety devices (1).
Close the openings with gluing points N.
Set the position of the multimedia changer L to
“H” using the setting screws (2).
Affix information sticker AM to the multimedia
changer L.
Tie back and insulate branch L5.
Connect branches C3, C4 and C5 to the same
coloured cables on branches L1, L2 and L3 on
the multimedia changer L.
Connect branch J1 to the multimedia changer L.APAF
D1
D2
X275
D3/D4

 
APAF
E1
E2
X279
E3/E4



 
V
1
N
N
L
2
2
AM


 
C4C3
L5
C5
L2
L1
J1
L3
L
060 0674 Z

Downloaded from www.Manualslib.com manuals search engine 16 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
6. To install the connection cable and multimedia changer
Cars without SA 601 only
Secure voltage supply B to rear module holder AZ
using hexagonal screw
R and hexagonal nut S.
Cars with SA 601 only
Secure voltage supply B to rear module
holder AZ using the existing hexagonal screw (1).
Connect branch A1 to branch B1.
Connect branch A3, BR cable, and branch I1, BR
cable, to earth post X13094.
Secure spacer plate P to front module
holder AY using countersunk screws Q and
hexagonal nuts S.
Secure spacer plate P to rear module
holder AZ using countersunk screws Q and
hexagonal nuts S.
B
S
AZ
R/1



 
A1
B1



 
A3
I1
X13094



 
E60
E60
E61
E65E65 E61L
E61R
S
S
S
QQ
P
AZAY