2006 BMW 7 SERIES wiring

Downloaded from www.Manualslib.com manuals search engine 3 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
Contents
SectionPage
1. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Preparations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. Installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. To install the fan and module holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. To install the connection cable and multimedia changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7. To install the fan cable (cars without an additional fan in the boot only) . . . . . . . . . . . . . . . . . . . 20
8. To install the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
9. To connect the seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
10. Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
11. Fan wiring harness circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Downloaded from www.Manualslib.com manuals search engine 4 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
1. Parts list
Legend
AConnection cable
BVoltage supply
CMultimedia changer AV adapter
DConnection wiring harness (left seat, length 5200 mm)
EConnection wiring harness (right seat, length 6700 mm)
FSeat wiring harness (2x)
GAuxiliary cable (jack diameter 2.5 mm, 2x)
HHeadphone cable (jack diameter 3.5 mm, 2x)
IFan wiring harness
JMultimedia changer power supply cable
KAuxiliary adapter (2x)
LMultimedia changer (not supplied with the retrofit kit)
MHexagonal screw M5 x 14 mm (not required)
NAdhesive patches (supplied with the multimedia changer kit)
OMounting plate
PSpacer plate (2x)










M
IJK
DEFG
H
OP
B
A
LN
C

 


Downloaded from www.Manualslib.com manuals search engine 10 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
3. Connection diagram
BVoltage supplyDConnection wiring harness (left seat)
B1WS 4-pin plugD18-pin round plug, SW
B2WS 4-pin plugD28-pin round plug, SW
B3WS 3-pin plugD38-pin round plug GE/BL
D48-pin round plug, BL
CMultimedia changer AV adapter
C18-pin round plug, GNEConnection wiring harness (right
seat)
C2Black 4-pin plugE18-pin round plug, SW
C3Cinch socket GEE28-pin round plug, SW
C4Cinch socket RTE38-pin round plug RT/GE
C5Cinch socket WSE48-pin round plug RT
J
C
D
HH
G
E
G
FF
U
L
D3E3
B2
L5 L1-L3 C3-C5
L4 C2
J2 J1
B3B1 E2
E1F3
F4F1F2
G2AA1
AA1 H2
G1
G2 G1H1
H2 H1
B
F2
F1
F3
D2
D1F4
AA AA
D4E4C1

  

Downloaded from www.Manualslib.com manuals search engine 11 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
3. Connection diagram
FSeat wiring harnessLMultimedia changer
F18-pin round plug, SWL1Cinch plug, WS
F2WS 10-pin plugL2Cinch plug, RT
F38-pin round plug, SWL3Cinch plug, GE
F48-pin round plug, SWL4Black 4-pin plug
L5Black 4-pin plug
GAuxiliary cable
G1Auxiliary jack (2.5 mm)UAV switcher
G28-pin round plug, SW
AAMonitor
HHeadphone cableAA18-pin round plug RT
H1Headphone jack (3.5 mm)
H28-pin round plug RT
JMultimedia changer power supply
cable
J18-pin round plug, SW
J2WS 3-pin plug
J
C
D
HH
G
E
G
FF
U
L
D3E3
B2
L5 L1-L3 C3-C5
L4 C2
J2 J1
B3B1 E2
E1F3
F4F1F2
G2AA1
AA1 H2
G1
G2 G1H1
H2 H1
B
F2
F1
F3
D2
D1F4
AA AA
D4E4C1

  

Downloaded from www.Manualslib.com manuals search engine 12 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
4. Installation and cabling diagram
Legend
BVoltage supply
D Connection wiring harness (left seat, length 5200 mm)
E Connection wiring harness (right seat, length 6700 mm)
L Multimedia changer
UAV switcher
AA Monitor
AD Radial fan
BD Axial fan
1 Power distributor A50
2Earth post X13094
E65E65
1
U
BL2D
E
BD
AD
AA
AA


 

Downloaded from www.Manualslib.com manuals search engine 22 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
8. To install the monitor
Cars with SA 456 only
Mark the hole at marking (1) on the inside of the
front seat rear panel (2) using the dimensions
shown.
Drill the hole using a 30 mm step drill.
All cars
Place the rear monitor trim AC on the top edge
(1) of the outside of the front seat rear panel (2).
The hole (3) in the rear of the monitor trim AC
must line up with the hole (4) in the front seat rear
panel.
Mark the holes (5) and drill them using as 15 mm
step drill.
Measure the dimensions of branch F2.
Push fabric hose AF over seat wiring harness F
and secure it with adhesive tape using the
dimensions shown.
Affix the marking (1) with adhesive tape using the
dimensions.
2 mm
 30 mm2
1
060 0770 Z
2
55
43
1
AC


 

 
 
1FAFF2
  

Downloaded from www.Manualslib.com manuals search engine 23 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
8. To install the monitor
As you install the seat wiring harness F check for sharp edges, reworking the edges if necessary.
After installation check that the seat wiring harness F moves easily when the backrest is adjusted.
The fitted fabric hose AF must be within the adjustment range of the backrest.

Route branches F1 and F2 as shown.
Route seat wiring harness F along the seat wiring harness (1).
1
F
F1/F2
AF



 

Downloaded from www.Manualslib.com manuals search engine 24 © BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
8. To install the monitor
Secure the adhesive marking (1) that you pre-
viously fitted on the seat wiring harness F to the
seat backrest (2) as shown using a cable tie AP.
Thread branches F1 and F2 through the front
seat rear panel (1).
Install the front seat rear panel (1) as described in
TISRA5215198.
Unscrew the tooth washer (1) and hexagonal nut (2)
from the auxiliary cable
G and headphone cable H.
Insert the auxiliary cable G into the front monitor
trim AT on the left and secure it with a toothed
washer (1) and hexagonal nut (2).
Insert the headphone cable H into the front
monitor trim AT on the right and secure it with a
toothed washer (1) and hexagonal nut (2).
Insert grommets AL into the monitor AA.
Thread headphone connector AA1 for the
monitor AA through the top grommet AL.
Insert cable ties AP into the existing holes.
1
21
F
APAP



 
1
F2
F1


 
21G
HAT


 
ALAP
AA1
AP
AA