IN AN EMERGENCY
214
CHANGING A WHEEL
Please be informed that:
– the jack mass is 2,100 kg.
– the jack requires no adjustment.
– the jack cannot be repaired. In the
event of breakage, it must be replaced by
another original one.
– no tools other than its operating crank
can be fitted to the jack.
To change a wheel, proceed as follows:– Stop the car in such a position that it
is not dangerous for the traffic, where it is
possible to change the wheel safely.
Where possible, park on a level, compact
surface.
– Switch off the engine and engage the
handbrake.
– Engage first gear or reverse.– Use handle(A-fig.2) to remove the
stiff covering (B).
– Loosen the clamping device (A-
fig. 3).
– Take out the tool container (B) and
take it near the wheel to be changed.
– Take the spare wheel (C).
– Remove the wheel cap (A-fig. 4)
(only versions with steel rims)
fig. 2
A0A0645b
fig. 3
A0A0151b
fig. 4
A0A0154b
