2006 ACURA CSX transmission fluid

Î
(#'


)
´µ
Electronic Control System
Functional Diagram
14-39
*1: ’06-07 models
*2: ’08-09 models Engine RPM Signal
Accelerator Pedal
Position Sensor Signal
Barometric Pressure
Sensor Signal
Manifold Absolute
Pressure Sensor Signal
ATF Temperature
Sensor Signal
Service Check SignalTransmission
Range
Switch
Signal
Brake Pedal Position
Switch Signal PGM-FI Control
System
PCM
A/T Control System Shift Control
 Ascending Control
 Descending
Control
 D-paddle Shift
Control

Clutch Pressure
Control
Lock-up Control
Shift Lock Control Shift Lock Solenoid
Vehicle Speed Signal
Data Link Connector Shift Solenoid Valve E
Shift Solenoid Valve D Shift Solenoid Valve C Shift Solenoid Valve B
Shift Solenoid Valve A
F-CAN Line
Automatic
Five-speed and
ReverseLock-up
ON/OFF
Lock-up
Conditions
Sequential
Sportshift
Control Gauge Control Module
(Tach) A/T Gear
Position Indicator
Engine Coolant
Temperature Sensor Signal
2ndClutchTransmission
Fluid Pressure Switch Signal ABS Modulator-Control
Unit Signal (via F-CAN line)*
Output Shaft (Countershaft)
Speed Sensor Signal
Paddle Shifter /
(Upshift/Downshift Switch) 3rdClutchTransmission
Fluid Pressure Switch Signal
1
VSA Modulator-Control
Unit Signal (via F-CAN line)*2
Input Shaft (Mainshaft)
Speed Sensor Signal
Grade Logic Control
Self-diagnosis/
Fail-safe Function
Communication and
Output Function
A/TClutchPressure
Control Solenoid Valve C A/TClutchPressure
Control Solenoid Valve B A/TClutchPressure
Control Solenoid Valve A
The electronic control system consists of the powertrain control module (PCM), sensors, and solenoid valves.
Shifting and lock-up are electronically controlled for comfortable driving under all conditions.
The PCM receives input signals from sensors, switches, and other control units, processes data, and outputs signals
for the engine control system and the A/T control system. The A/T control system includes shift control, grade logic
control, clutch pressure control, and lock-up control.
The PCM switches the shift solenoid valves and the A/T clutch pressure control solenoid valves ON and OFF to control
gear selection and torque converter clutch lock-up.
(cont’d)
08/08/21 14:38:21 61SNR030_140_0041
ProCarManuals.com
DYNOMITE -2009-

ÎClutch Pressure Control
14-45
PCM
Engine RPM Signal
Engine Coolant
Temperature
Sensor Signal Input Shaft
(Mainshaft)
Speed Sensor Signal
Output Shaft
(Countershaft)
Speed Sensor Signal
ATF Temperature
Sensor Signal Actual
Driving Shift
Position
Correction of Data
Correction of Engine
Coolant Temperature
Sensor Data
Manifold Absolute
Pressure Sensor Signal
3rd Clutch
Transmission Fluid
Pressure Switch Signal 2nd Clutch
Transmission Fluid
Pressure Switch Signal
Correction of ATF
Temperature Sensor
Signal Data
Correction of
Hydraulic Pressure
Applying Timing
Correction of Engine
Torque Signal Data Master Target of
Controlling Current
Decision of
Shifting Mode
Ignition Timing
Requirement
PGM-FI
Control
System
Current
Feedback A/T Clutch Pressure
Control Solenoid
Valves A, B, and C
PGM-FI
Control
System
Throttle Position
Sensor Signal
Barometric Pressure
Sensor Signal
The PCM actuates A/T clutch pressure control solenoid valves A, B, and C to control the clutch pressure. When shifting
between lower and higher gears, the clutch pressure regulated by A/T clutch pressure control solenoid valves A, B,
and C engages and disengages the clutch smoothly.
The PCM receives input signals from the various sensors and the switches, processes data, and outputs current to A/T
clutch pressure control solenoid valves A, B, and C.
(cont’d)
08/08/21 14:38:23 61SNR030_140_0047
ProCarManuals.com
DYNOMITE -2009-

Î
ØÚÓ´
µ
Electronic Control System (cont’d)
PCM A/T Control System Electrical Connections
14-48 Automatic Transmission
System Description (cont’d)
41
23
41 24
23 4
40
29
26 2
27
20 21
10
89
35 19
16 17 18
36 39 40 44434230
29 32 16 1817
13 14 15
1211 789
654321
31
36 37 4044
42
27 28 29
33 3424 25
20 21 14 15
654
31 23
31
13
9
87
11 12 1514 13 17 18
16
22
21
20 25
32 35 34
33
3028
27
42 43 44
36 22
39
10
26
SHE
B24
RIGHT SUPP
B16
B40
SDNP
LEFT
F-CAN Transceiver
CANL
A37
CANH
A36
Terminal side of female terminals
A (44P) B (44P) C (44P) C44 C40 B1 B36
B15
ATPS
S
Dash-light Brightness Control Circuit
SG1C14
NC C43
VCC1 C13
B33
SG2 B17
NM B18
VCC2
TATF B27 B11
SHB SHA B10
B20
SHC
B26
SHD LSC
B25 B35
LSB
PG1
B28
ATPFWD
N BAT
D
PG2
ATPP
B13
DATA LINK CONNECTOR
R
CPU
LG1
ATPR
B14 SCS
IGNITION SWITCH
LG2
GAUGE CONTROL MODULE (TACH)
B9OP3SW OP2SW
B8 ATPRVS
B22 ATPD
B12
P
S
R
P
ND B21ATPN
BKSW
A40
BRAKE LIGHTS A31 A27SLS PCM
C36 IG1 B44
LSA
BATTERY
IG1
BRAKE PEDAL
POSITION SWITCH SHIFT LOCK
SOLENOID
TRANSMISSION
RANGE SWITCH A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE A
A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE B
A/T CLUTCH PRESSURE
CONTROL SOLENOID VALVE C
SHIFT SOLENOID
VALVE A
SHIFT SOLENOID
VALVE B
SHIFT SOLENOID
VALVE C
SHIFT SOLENOID
VALVE D
ATF
TEMPERATURE
SENSOR
OUTPUT SHAFT
(COUNTERSHAFT)
SPEED
SENSOR
INPUT SHAFT
(MAINSHAFT)
SPEED
SENSOR
2ND CLUTCH TRANSMISSION
FLUID PRESSURE SWITCH
3RD CLUTCH TRANSMISSION
FLUID PRESSURE SWITCH
A/T Gear Position Indicator
Driver Circuit
SHIFT
INDICATOR SHIFT SOLENOID
VALVE E
PADDLE SHIFTER (UPSHIFT SWITCH)
PADDLE SHIFTER (DOWNSHIFT SWITCH)
PCM Connector Terminal Locations
08/08/21 14:38:25 61SNR030_140_0050
ProCarManuals.com
DYNOMITE -2009-

Î
ØÚ Ó
Ø
Ú
PCM A/T Control System Inputs and Outputs
PCM CONNECTOR A (44P) Wire Color Terminal Name Description Signal
PCM CONNECTOR B (44P) Wire Color Terminal Name Description SignalTerminalNumber
Terminal Number
14-49
A (44P) B (44P) C (44P)
PCM Connector Terminal Locations
A27 PNK SLS (SHIFT LOCK
SOLENOID) Drives shift lock solenoid With ignition switch ON (II), in P, brake pedal
pressed, and accelerator released: about battery
voltage
A31 BRN SCS (SERVICE CHECK SIGNAL) Detects service check signal With service check signal shorted using HDS: about
0V
With service check signal opened: about 5.0 V
A36 WHT CANH (CAN COMMUNICATION SIGNAL
HIGH) Sends and receives
communication signal
With ignition switch ON (II): about 2.5 V (pulses)
A37 RED CANL (CAN COMMUNICATION SIGNAL
LOW) Sends and receives
communication signal
With ignition switch ON (II): about 2.5 V (pulses)
A40 LT GRN BKSW (BRAKE PEDAL POSITION SWITCH) Detects brake pedal
position switch signalWith brake pedal pressed: about battery voltage
With Brake pedal released: about 0 V
NOTE: Standard battery voltage is about 12 V.


B1 BLK/RED
BLKPG2 (POWER GROUND) Ground circuit for PCM
circuitLess than 1.0 V at all times
B8 BLU/RED OP2SW (2ND CLUTCH TRANSMISSION FLUID
PRESSURE SWITCH) Detects 2nd clutch
transmission fluid pressure
switch signalWith ignition switch ON (II):
Without 2nd clutch pressure: about 5.0 V
With 2nd clutch pressure: about 0 V
NOTE: Standard battery voltage is about 12 V.
*1: ’06 model
*2: ’07-09 models
(cont’d)
*1
*2
Terminal side of female terminals
08/08/21 14:38:26 61SNR030_140_0051
ProCarManuals.com
DYNOMITE -2009-

´´´
´
Î
ØÚ Ó
Ú
Electronic Control System (cont’d)
PCM A/T Control System Inputs and Outputs (cont’d)
PCM CONNECTOR B (44P)Wire Color Terminal Name Description SignalTerminalNumber
14-50Automatic Transmission
System Description (cont’d)
A (44P)
B (44P) C (44P)
PCM Connector Terminal Locations




B9 BLU/WHT OP3SW (3RD CLUTCH
TRANSMISSION FLUID
PRESSURE SWITCH) Detects 3rd clutch
transmission fluid pressure
switch signalWith ignition switch ON (II):
Without 3rd clutch pressure: about 5.0 V
With 3rd clutch pressure: about 0 V
B10 BLU/BLK SHA (SHIFT SOLENOID VALVE A) Drives shift solenoid
valve AWith engine running in R, D and S (in 1st, 4th, and
5th gears): about battery voltage
With engine running in P, N, D and S (in 2nd and 3rd
gears): about 0 V
B11 GRN/WHT SHB (SHIFT SOLENOID VALVE B) Drives shift solenoid
valve BWith engine running in P, R, N, D and S (in 1st and
2nd gears): about battery voltage
With engine running in D and S (in 3rd, 4th, and 5th
gears): about 0 V
B12 RED/BLK ATPN (TRANSMISSION RANGE SWITCH NEUTRAL) Detects transmission range
switch N position signalIn N: about 0 V
In any position other than N: more than 5.0 V
B13 BLU/BLK ATPP (TRANSMISSION RANGE SWITCH PARK) Detects transmission range
switch P position signalIn P: about 0 V
In any position other than P: more than 5.0 V
B14 WHT ATPR (TRANSMISSION RANGE SWITCH R) Detects transmission range
switch R position signalIn R: about 0 V
In any position other than R: more than 5.0 V
B15 RED ATPS (TRANSMISSION RANGE SWITCH S) Detects transmission range
switch S position signalIn S: about 0 V
In any position other than S: about battery voltage
B16 BLU/YEL SUPP (PADDLE SHIFTER (UPSHIFT SWITCH)) Detects paddle shifter
(upshift switch) signalIn S:
With paddle shifter (upshift switch) pressed:
about 0 V
With paddle shifter (upshift switch) released:
about battery voltage
B17 WHT/RED NM (INPUT SHAFT (MAINSHAFT) SPEED
SENSOR) Detects input shaft
(mainshaft) speed sensor
signalWith ignition switch ON (II): about 0 V
With engine idling in N: about 2.5 V
B18 YEL/BLU VCC2 (SENSOR VOLTAGE) Provides sensor reference voltageWith ignition switch ON (II): about 5.0 V
B20 GRN SHC (SHIFT SOLENOID VALVE C) Drives shift solenoid
valve CWith engine running in N, D and S (in 1st, 3rd, and
5th gears): about battery voltage
With engine running in P, R, D and S (in 2nd and 4th
gears): about 0 V
NOTE: Standard battery voltage is about 12 V.
Terminal side of female terminals
08/08/21 14:38:26 61SNR030_140_0052
ProCarManuals.com
DYNOMITE -2009-


(#'


)
Hydraulic Controls
Valve Bodies
14-53
SHIFT SOLENOID
VALVE DSHIFT SOLENOID
VALVE E
SHIFT SOLENOID
VALVE C
SHIFT SOLENOID
VALVE A
SHIFT SOLENOID
VALVE B A/T CLUTCH PRESSURE
CONTROL SOLENOID
VALVE B
A/T CLUTCH PRESSURE
CONTROL SOLENOID
VALVE C
A/T CLUTCH PRESSURE
CONTROL SOLENOID
VALVE A
SERVO BODY
REGULATOR
VALVE BODY
MAIN VALVE BODY
The valve body includes the main valve body, the regulator valve body, and the servo body. The ATF pump is driven
by splines on the end of the torque converter which is attached to the engine. Fluid flows through the regulator valve
to maintain specified pressure through the main valve body to the manual valve, directing pressure to the shift valves
and to each of the clutches via the shift solenoid valves. Shift solenoid valves A, B, C, D, and E are bolted on the servo
body. A/T clutch pressure control solenoid valves A, B, and C are mounted on the outside of the transmission housing.
(cont’d)
08/08/21 14:38:27 61SNR030_140_0055
ProCarManuals.com
DYNOMITE -2009-

Î

Î

Hydraulic Controls (cont’d)
Main Valve Body
Regulator Valve Body
14-54Automatic Transmission
System Description (cont’d)
MAIN VALVE BODY
SHIFT VALVE C
COOLER CHECK VALVE
LOCK-UP CONTROL VALVE
SHIFT VALVE E
SERVO CONTROL VALVE RELIEF VALVE
MANUAL VALVE
SHIFT VALVE B
SHIFT VALVE A
ATF PUMP DRIVEN GEAR
ATF PUMP DRIVE GEAR
TORQUE CONVERTER
CHECK VALVE LOCK-UP SHIFT VALVEREGULATOR VALVE BODY
3RD ACCUMULATOR
1ST ACCUMULATOR
REGULATOR VALVE
The main valve body contains the manual valve, shift valves A, B, C, and E, the relief valve, the lock-up control valve,
the cooler check valve, the servo control valve, the ATF pump drive gear, and the ATF pump driven gear. The primary
function of the main valve body is to switch fluid pressure on and off and to control hydraulic pressure going to the
hydraulic control system.
The regulator valve body contains the regulator valve, the torque converter check valve, the lock-up shift valve, and
the 1st and 3rd accumulators.
08/08/21 14:38:28 61SNR030_140_0056
ProCarManuals.com
DYNOMITE -2009-

(#'


)
Hydraulic Flow
Distribution of Hydraulic Pressure
Hydraulic Pressure at the Port for use in the hydraulic circuitPortNo. Hydraulic Pressure Port
No.Hydraulic Pressure
14-57
As the engine turns, the ATF pump starts to operate. Automatic transmission fluid (ATF) is drawn through the ATF
strainer (filter) and discharged into the hydraulic circuit. Then, ATF flowing from the ATF pump becomes line pressure
that is regulated by the regulator valve. Torque converter pressure from the regulator valve enters the torque
converter through the lock-up shift valve, and it is discharged from the torque converter. The torque converter check
valve prevents torque converter pressure from rising.
The PCM switches shift solenoid valves ON and OFF. The shift solenoid valve intercepts line pressure from the ATF
pump via the manual valve when the shift solenoid valve is OFF. When the shift solenoid valve is turned ON by the
PCM, line pressure changes to shift solenoid valve pressure at the shift solenoid valve, then the shift solenoid valve
pressure flows to the shift valve. Applying shift solenoid pressure to the shift valves moves the position of the shift
valve, and switches the port of the hydraulic circuit. The PCM also controls A/T clutch pressure control solenoid valves
A, B, and C. The A/T clutch pressure control solenoid valves regulate hydraulic pressure, and applies pressure to the
clutches to engage smoothly. The clutches receive optimum clutch pressure which is regulated by the A/T clutch
pressure control solenoid valves for comfortable driving and shifting under all conditions.
1 Line SB Shift solenoid valve B
3 Line SC Shift solenoid valve C
3’ Line SD Shift solenoid valve D 4 Line SE Shift solenoid valve E
4’ Line 10 1st clutch
4’’ Line 20 2nd clutch 7 Line 30 3rd clutch
1A 40 4th clutch 1B 50 5th clutch
3A 55 A/T clutch pressure control solenoid valve A 3B 55’ A/T clutch pressure control solenoid valve A
3C 56 A/T clutch pressure control solenoid valve B
5A 57 A/T clutch pressure control solenoid valve C 5B 90 Torque converter
5C 91 Torque converter
5D 92 Torque converter 5E 93 ATF cooler5F 94 Torque converter
5G A/T clutch pressure control solenoid valve B 95 Lubrication 5H A/T clutch pressure control solenoid valve C 96 Torque converter 5J A/T clutch pressure control solenoid valve C 97 Torque converter
5K A/T clutch pressure control solenoid valve C 99 Suction 5L A/T clutch pressure control solenoid valve C X Drain
5N A/T clutch pressure control solenoid valve C HX High position drain
SA Shift solenoid valve A AX Air drain
(cont’d)
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve A
Line or A/T clutch pressure control solenoid valve B
Line or A/T clutch pressure control solenoid valve A or
B
08/08/21 14:38:29 61SNR030_140_0059
ProCarManuals.com
DYNOMITE -2009-