1. Before cleaning the Motorcycle :
eksVjlkbfdy dh lQkbZ djus ls
igys %
a. Block off the end of the exhaust
pipe to prevent water entry; a
plastic bag and string rubber
band may be used.
,XtkWLV ikbZi ¼fudkl&ikbi½ ls ikuh
ds izos'k dks jksdus ds fy, ikbi ds
,d fljs dks IykfLVd cSx vkSj jcj
cSaM dk iz;ksx djds] can fd;k tk
ldrk gSA
b. Make sure the spark plug and all
filler caps are properly installed.
lqfuf'pr djssa fd LikWdZ Iyx vkSj
lHkh fQYyj&dSSIl Bhd rjg ls yxk,
x;s gksaA
2. If the engine case is excessively
greasy, apply degreaser with a
paint brush. Do not apply
degreaser to the chain,
sprockets, or wheel axles.
;fn batu dk dsl vR;kf/kd :i ls
fpduk gS rks isaV czq'k dh lgk;rk ls
bl ij ^fpdukbZ vojks/kd* yxk,aA
psu] LizkWdsV~l vFkok ifg, ds ,Dlyksa
ij fM&xzhlj dk mi;ksx u djsaA
A. CLEANING
lQkbZ
Frequent, thorough cleaning of your
Motorcycle will not only enhance its
appearance but will improve its
general performance and extend the
useful life of many components.tYnh&tYnh] iwjh rjg lQkbZ u dsoy
vkidh eksVjlkbfdy dks ns[kus esa vPNk
cukrh gS cfYd bldh lk/kkj.k dk;Z{kerk
esa lq/kkj ykrh gS vkSj blls cgqr ls iqtsZ
ds dk;Z&dky esa o f) gksrh gS CAUTION :
Improper cleaning can damage
the cowlings, panels and other
plastic parts. Use only a soft,
clean cloth or sponge with mild
detergent and water to clean
plastic.
Do not use any harsh chemical
products on plastic parts. Be
sure to avoid using cloths or
sponges which have been in
contact with strong or abrasive
cleaning products, solvent or
thinner, fuel (gasoline), rust
removers or inhibitors, brake
fluid, antifreeze or electrolyte.
lko/kkuh %
xyr rjhds ls dh xbZ lQkbZ ls
eksVjlkbfdy ds dkůyx] iSuy rFkk
vU; IykWfLVd ds iqtsZ [kjkc gks ldrs
gSaA IykWfLVd ds iqtksZa dks lkQ djus
ds fy, eghu fMVtsZaV vkSj ikuh ds
lkFk dsoy lkQ] eqyk;e diM+s dk
gh iz;ksx djsaA IykfLVd ds iqtsZ
¼daiksusaV~l½ ds fy, fdlh rst
dsehdYl dk iz;ksx u djsaA
lqfuf'pr djsa fd mu diM+ksa vFkok
Liat ds iz;ksx ls cpk tk, tks
'kfDr'kkyh vFkok ,cjsflo lQkbZ
mRiknksa] nzkod] vFkok fFkuj] b±/ku]
¼xSl½ tax izfrjks/kdksa vFkok
tax&fueZwydksa] cszd ds b±/ku] 'khr
fojks/kh ¼,aVh&Ýht½ vFkok bysDVªksykbV
ds laidZ esa vk tkrs gSaA
7.1
CLEANING AND STORAGElQkbZ rFkk HkaMkj.k
pg56_96.pmd2/25/2005, 9:59 AM 84
2.
b±/ku dh [kkyh Vadh dks ckgj fudky
ysa] Vadh esa ,d di
SAE 10W30 or
20W40
czkaM dk eksVj vkW;y Mkysaa]
fQj Vadh ds van:uh lrg dh dks¯Vx
djus ds fy, Vadh dks vPNh rjg ls
fgyk,a vkSj Qkyrw rsy dks ckgj fudky
nsaA Vadh dks fQj ls ;FkkLFkku ij
yxk nsaA
3. Remove the spark plug, pour
about one tablespoon of SAE
10W30 or 20W40 motor oil in the
spark plug hole. Reinstall spark
plug. Kick the engine over several
times (with the ignition off) to coat
the cylinder wall with oil.
LikWdZ Iyx dks ckgj fudky ys]
SAE
10W30 or 20W40
czkaM dk ,d cM+k
pEep LikWdZ Iyx ds Nsn esa ¼gksy½
Mkysa vkSj bls fQj ls okil yxk nsaA
batu dks dqN le; rd fdd yxkrs
jgsa ¼bXuh'u dks can j[krs gq,½ ftlls
flyh.Mj dh fnokjksa dh vkW;y&dks¯Vx
gks tk,A
4. Remove the drive chain.
Thoroughly clean the chain
withsolvent and lubricate it.
Reinstall the chain or store it in a
B. STORAGEch- Hk.Mkj.k ¼LVksjst½Long term storage (60 days or more)
of your Motorcycle will require more
preventive procedures to guard
against deterioration. After thoroughly
cleaning the Motorcycle, prepare for
storage as follows:vkidh eksVjlkbfdy dks yEch vof/k rd
¼60
fnu ;k mlls Åij½ ^LVksj* djds
j[kus ij bls u"V gksus ls cpkus ds fy,
lko/kkuho'k dqN izfØ;k,a viukuh iM+rh
gSaA eksVjlkbfdy dks iwjh rjg lQkbZ
djus ds ckn] fuEufyf[kr ckrkssa dk vuqlj.k
djds] bls ^LVksj* djus dh rS;kjh djsa %
1. Drain the fuel tank, fuel lines, and
carburetor float bowl.
b±/ku dh Vadh] b±/ku dh ykbZuksa] vkSj
dkjC;wjsVj ds ¶yksV&ckÅy dks [kkyh
djs ysaA
2. Remove the empty fuel tank, pour
a cup of SAE 10W30 or 20W40
motor oil in the tank, shake the
tank to coat the inner surfaces tank
to coat the inner surfaces
thoroughly and drain off the excess
oil. Reinstall the tank.plastic bag (tied to frame for
safekeeping).
M ªkbo&pSu dks ckgj fudky ysaA
bls iwjh rjg ls nzkod ¼lkWYosaV½ ls
lkQ djsa vkSj bl ij xzhl bR;kfn
yxk nsaA pSu dks fQj ls yxk nsa
vFkok bls ,d IykWfLVd & cSx esa
^LVksj* djds j[k ysaA ¼lqjf{kr j[kus
ds fy, Ýse ds lkFk cka/k nsa½A
5. Lubricate all control cables.
lHkh daVªksy&dscyksa ¼rkjksa½ dh xzh¯lx
dj ysaA
6. Block up the frame to raise both
wheels off the ground.
nksuksa ifgvksa dks t+ehu ls Åij mBkus
ds fy, Ýse dks jksddj j[ksaA
7. Tie a plastic bag over the
exhaust pipe outlet to prevent
moisture from entering.
ueh dks ^,XtkWLV&ikbi* ¼fudkl&uyh½
ds vanj vkus ls cpkus dss fy, ikbi
dks ckgj ls IykWfLVd cSx ls
CLEANING AND STORAGElQkbZ rFkk HkaMkj.k
7.3
pg56_96.pmd2/25/2005, 9:59 AM 86
SAFETY NORMS
9.4
lqj{kk&flðk¡r
Certain Safety norms have been mandated for the Two Wheelers to prevent accidents. The following items have
been provided in the Vehicle for your safety.lqj{kk flðkar
CMVR
fu;e¨a ds vuqlkj] n¨ ifg;k okgu¨ d¨ nq?kZVuk ls cpkus ds fy, fuf'pr lqj{kk flðkar cuk, x, gSA vkidh
lqj{kk ds fy, e¨VjlkbZfdy esa fuEufyf[kr oLrq,¡ çnku dh xbZ gSA
It is recommended to use Saree Guard, when driving with female as a pillion rider.fiNyh lokjh ds :i esa ,d efgyk ds lkFk *Mªkb¯ox^ djrs gq, ;g çLrkfor fd;k x;k gS fd e¨VjlkbZdy esa *lkM+h xkMZ^ yxk;k
tk,AIn the interest of your own safety you are requested to always keep the above items (and the Vehicle in general) in
good working condition to avoid any Accident.vkidh lqj{kk ds fgr esa vkils çkFkZuk gS fd mij¨Dr oLrqv¨a d¨ fdlh Hkh nq?kZVuk ls cpkus ds fy, vPNh dk;Z&fLFkfr esa j[ksaA1. Horn
gkuZA
2. Rear View Mirror
ihNs ns[kus ds fy, 'kh'kkA
3. Efficient Front & Brakes (To be applied simultaneously)
vxyh o fiNyh czsds ¼t¨ lkFk&lkFk yxkbZ tkrh gS½A
4. Grip for Pillion Rider
ihNs cSBs gq, O;fDr ds fy, fxziA
5. Head Light/Tail Light
gSM ykbVA ihNs dh ykbVA
6. Stay for Helmet lock
gsyesV d¨ ykWd djus ds fy, *LVs^A
7. Indicators
bafMdsVj
pg97_103.pmd2/25/2005, 9:59 AM 98
PRE-DELIVERY INSPECTION REPORT
f. Wheels
Tyre :Tyre pressure Solo Double
(PSI)
Front 25 25
Rear 32 32
R i m : Runout - Radial - 1.5 mm (Max)
- Lateral - 1.5 mm (Max)
Spokes : No loosenes
g. Locks Operation : • Ignition
Steering Fuel Tank Cap Side Cover (L.H.)
h. Fasteners Specified Torque
(Ft-Lb)
1. Front Wheel Axle Nuts25-40
2. Front Fork (Crown Handle & Inner Tube)13-202. Front Fork under Bracket Stem Nut18-223. Handle Bar Mounting Bolts13-204. Rear Shock Absorber Mounting Bolts22-355. Rear Swing Arm Pivot Shaft Nut32-526. Rear Wheel Axle/Sprocket. Shaft Nuts60-70
B. ENGINE
a. Engine Oil : Oil Level (For checking - Refer Pg. 6-11)
Check for any Leakages
10-32
SERVICE2.pmd2/25/2005, 10:01 AM 2
10-35
1. Operation of all the locks (Ignition, Steering, Fuel Tank Cap, Side Cover L.H.).
2. Fuel Cock Lever Operation and its reserve position; Fuel Tank Capacity including reserve.
3. Operation and function of Choke Lever.
4. Operation of Kick Lever.
5. Operation of Throttle.
6. Operation of Handle Bar Switches, their Functions and Pass Beam.
7. Disadvantages of riding on half Clutch (Never ride with clutch pressed).
8. Gear shifting pattern.
9. Tyre inflation pressure :Front - 25 Psi Rear - 32 Psi (Solo), 32 Psi (Double)
10. Never give sudden acceleration; always accelerate gradually
11. Simultaneous use of Front and Rear Brakes.
12. Never ride with your foot on Rear brake Pedal.
13. Whenever parking the Motorcycle on the Side Stand, ensure that the Fuel Cock Lever is in closed
position.
INSTALLATION
Procedures to be explained to the customer on delivery of the Motorcycle by the Dealer's
Representative.
SERVICE2.pmd2/25/2005, 10:01 AM 5
YAMAHA MOTOR INDIA PVT. LTD.
2nd FLOOR, ATKINSON PLACE
NO. 4, JOTHI VENKATACHALAM
VEPERY ROAD
CHENNAI - 600007, TAMILNADU
PH. : 044-25611940 FAX : 25611941
[email protected] MOTOR INDIA PVT. LTD.
3RD FLOOR JELITTA TOWERS,
21/1, MISSION ROAD,
BANGLORE-560027, KARNATAKA
PH. : 080-2126350/2126351, Fax: 2126353
[email protected] MOTOR INDIA PVT. LTD.
502, SAROVAR COMPLEX
JAIN DERASAR LANE, OFF.C.G.ROAD
AHMEDABAD-380009, GUJARAT
PH. : 079-6406939, FAX : 079-6565941
[email protected] MOTOR INDIA PVT. LTD.
B-1/1, L.PARK
MAHANAGAR EXTENTION
LUCKNOW-226006, UTTAR PRADESH.
PH. : 0522-2320275, FAX : 0522-2377847
[email protected] MOTOR INDIA PVT. LTD.
77- A - 78 SRI AURBINDO MARG
ADCHINI
NEW DELHI-110017
PH. : 011-51644455/51645566
[email protected]
YAMAHA MOTOR INDIA PVT. LTD.
56/12, HAZARA ROAD
KOLKATA-700016 (WB)
PH. : 033-24860533/24860537
[email protected] MOTOR INDIA PVT. LTD.
K-MANSION BUILDING, BLOCK-K-3,
340 GAUTAM NAGAR,
BHUBANESHWAR-751 014
PH. : 0674-26474312
[email protected] MOTOR INDIA PVT. LTD.
6-3-883, FLAT NO. 602, TOPAZ BUILDING
PANJAGUTTA, HYDERABAD - 500 482PH. : 040-55103885/[email protected] MOTOR INDIA PVT. LTD.
D-64/132 - 2nd FLOOR
ANAND COMPLEX - SIGRA
VARANASI - 221 001
PH. : 0542-3096929
FAX : 0542-2227224
[email protected]
YAMAHA MOTOR INDIA PVT. LTD.
2A & 2B, MAYFAIR TOWERS,
WAKDE WADE,SHIVAJI NAGAR,
PUNE- 411003, MAHARASHTRA
PHONE (020) - 5530327, 5530873
[email protected] MOTOR INDIA PVT. LTD.
C/O GREEN VALLEY TRAVEL TPTT.LTD.
G.N. BARDOLI ROAD, SILPUKHRI
GUWAHATI-781003, ASSAM
PH. : 0361-2661950, FAX : 0361-2661950
[email protected] MOTOR INDIA PVT. LTD.
HAPPY CHAMBERS, 179 ZONE-1
BHOPAL-462001, MADHYA PRADESHPH. : 0755-2554305
FAX : [email protected]
YAMAHA MOTOR INDIA PVT. LTD.
406, ADARSH PLAZA,
KHASA KOTHI CROSSING
JAIPUR-320001, RAJASTHANPH. : 0141-2200393 / 2207228,
FAX : [email protected]
YAMAHA MOTOR INDIA PVT. LTD.
35/279, SUBURBAN COMPLEX
PALARIVATTOM, KOCHI-682025, KERALA
PH. : 0484-2341218, FAX : 0484-2341218
[email protected]
YMI AREA OFFICES
YAMAHA MOTOR INDIA PVT. LTD.
504, HARIOM TOWERS, 6TH FLOOR
OPP. WOMENS COLLEGE
RANCHI - JHARKHAND
PH. : 0651-2210442
address.pmd2/25/2005, 9:59 AM 1