Page 82 of 156
Rear wheel installationfiNys ifg, dks yxkuk1. Install the rear wheel and the
axle.
fiNys ifg, vkSj ,Dly dks yxk;saA
2. Install the axle nut.
,Dly ds uV dks yxk;saA
3. Insert the brake rod into the
brake cam lever and install the
brake free play adjusting nut.
czsd dh NM+ dks cszd ds dSe yhoj esa
cSBk,a ¼Mkysa½ vkSj ^czsd Ýh Iys ,M~t¯LVx
uV dks* ogka yxk nsaA
4. Install the tension bar on to the
brake shoe plate and tighten
the tension bar nut to the
specified tightening torque.
czsd 'kw IysV ij Vsa'ku ckWj dks yxk;sa
rFkk dk Vsa'ku ckWj uV dks fu£n"V
VkdZ ij dl nsaA
5. Take the Motorcycle off the
centerstand.
eksVjlkbfdy dks lsaVj LVS.M ls uhps
mrkj nsaA
Specified torque
fu£n"V VkdZ %
Tension bar nut
Vsa'ku&ckj dk uV %
14 ft-lb (1.9 mkg)
Axle nut
,Dly uV %
65 ft-lb (9.05 mkg)
6. Tighten the axle nut to the
specified tightening torque.
Then install a new cotter pin.
,Dly ds uV dks fu£n"V VkdZ rd ys
tkdj vPNh rjg ls dl nsaA
rRi'pkr~ u;k dkWVj fiu yxk,aA
WARNINGAlways use a new cotter pin. psrkouhges'kk u;s dkWVj&fiu dk iz;ksx djsaA7. Adjust the rear brake pedal free
play. (See page 6-23)
fiNyh czsd&iSMy dh Lora=k ¼Ýh½ Iys
dks ,M~tLV djsaA
¼i "B la[;k
6-23
ns[ksaa½
WARNINGCheck the operation of the brake
light after adjusting the rear
brake. psrkouhfiNyh czsd dks ,M~tLV djus ds ckn
czsd ykbV dh dk;Z&iz.kkyh dh tk¡p djsaA
6.44
PERIODIC MAINTENANCE AND MINOR REPAIRlkef;d j[kj[kko rFkk ekewyh ejEer
pg56_96.pmd2/25/2005, 9:59 AM 80
Page 94 of 156
Wheels:
Type:
FrontSpoke wheel
RearSpoke wheel
Size:Front1.60 × 18
Rear1.60 × 18
Brake:
Front :
Type Drum brake
operationright Hand lever
Rear :
Type Drum brake
OperationRight foot operation
Suspention :
Front Telescopic fork
RearSwing arm
Shock absorber:
Front Coil spring/oil damper
RearCoil spring/oil damperWheels travel:
Front 110 mm
Rear 70 mm
Electrical:
Ignition system:CDI (Digitally
Controlled)
Generator system:
Type Flywheel magneto
Standard output 12V
Battery:
Type Lead acid
Voltage, capacity 12V 2.5AH
Bulb voltage, Wattage × Quantity:
Headlight12V 35W/35W × 1
Tail/Brake light 12V 21W/5W × 1
Front flasher light 12V 10W × 2
Rear flasher light 12V 10W × 2
Meter light 12V 2W × 1
Neutral indicator light 12V 3.4W × 1
High beam indicator light 12V 3.4W × 1
Turn indicator light 12V 3.4W × 1
Fuse:
Main 10A
8.5
SPECIFICATIONSfo'ks"k fooj.k
pg56_96.pmd2/25/2005, 9:59 AM 92
Page 99 of 156
SAFETY NORMS
9.4
lqj{kk&flðk¡r
Certain Safety norms have been mandated for the Two Wheelers to prevent accidents. The following items have
been provided in the Vehicle for your safety.lqj{kk flðkar
CMVR
fu;e¨a ds vuqlkj] n¨ ifg;k okgu¨ d¨ nq?kZVuk ls cpkus ds fy, fuf'pr lqj{kk flðkar cuk, x, gSA vkidh
lqj{kk ds fy, e¨VjlkbZfdy esa fuEufyf[kr oLrq,¡ çnku dh xbZ gSA
It is recommended to use Saree Guard, when driving with female as a pillion rider.fiNyh lokjh ds :i esa ,d efgyk ds lkFk *Mªkb¯ox^ djrs gq, ;g çLrkfor fd;k x;k gS fd e¨VjlkbZdy esa *lkM+h xkMZ^ yxk;k
tk,AIn the interest of your own safety you are requested to always keep the above items (and the Vehicle in general) in
good working condition to avoid any Accident.vkidh lqj{kk ds fgr esa vkils çkFkZuk gS fd mij¨Dr oLrqv¨a d¨ fdlh Hkh nq?kZVuk ls cpkus ds fy, vPNh dk;Z&fLFkfr esa j[ksaA1. Horn
gkuZA
2. Rear View Mirror
ihNs ns[kus ds fy, 'kh'kkA
3. Efficient Front & Brakes (To be applied simultaneously)
vxyh o fiNyh czsds ¼t¨ lkFk&lkFk yxkbZ tkrh gS½A
4. Grip for Pillion Rider
ihNs cSBs gq, O;fDr ds fy, fxziA
5. Head Light/Tail Light
gSM ykbVA ihNs dh ykbVA
6. Stay for Helmet lock
gsyesV d¨ ykWd djus ds fy, *LVs^A
7. Indicators
bafMdsVj
pg97_103.pmd2/25/2005, 9:59 AM 98
Page 138 of 156
PRE-DELIVERY INSPECTION REPORT
10-34
C. ELECTRICAL
a. Ignition Switch Operation
b. Left Hand Switch Operation & Pass Beam
Horn
Indicator Head Light
c. All Bulbs - Functioningd. Battery
Electrolyte Level
Specific Gravity Routing of Breather Pipe Fuse Routing of Positive Wire (Red) Below Breather Pipe
D. ROAD TEST
a. Starting
b. Gear Shifting Operationc. Clutch Operationd. Application of Brakes (Front and Rear)e. Speedo/ Odo Meter OperationEXPLAINED BY:SIGNATURE :NAME :
MAIN SELLING DLR'S STAMP, SIGN & CODE
CUSTOMER’S SIGNATURE:
SERVICE2.pmd2/25/2005, 10:01 AM 4
