2005 YAMAHA VX110 service

8-21
E
HULL
HOODSTEERING COLUMN
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
STEERING COLUMN
DISASSEMBLYFollow the left “Step” for disassembly.
1 Steering column 1
2 Seal rubber 1
3Bolt 4
4 Steering sensor 1
5Bolt 3
6 Spacer 1
7Buzzer 1
8 Steering housing assembly 1
Reverse the disassembly steps for
assembly.
6
LT
572
LT
LT
572
LT
3
4 1
8
27 5
7
8 × 25 mm
16 N • m (1.6 kgf • m, 12 ft • Ib)
ProCarManuals.com

8-22
E
HULL
HOODSTEERING COLUMN
SERVICE POINTS
Steering column inspection
1. Inspect:
Seal rubber
Steering housing assembly
Cracks/damage/wear →
Replace the
steering column.
ProCarManuals.com

8-23
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
REMOTE CONTROL CABLES AND SPEED SENSOR LEAD
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
REMOTE CONTROL CABLES
AND SPEED SENSOR LEAD
REMOVALFollow the left “Step” for removal.
Service lid 1 Refer to “FRONT HOOD”.
Seat assembly Refer to “SEAT AND HAND GRIP”.
Engine hatch cover Refer to “ENGINE HATCH COVER”.
Shift lever Refer to “SHIFT LEVER (DELUXE MODEL
ONLY)”.
1 Steering cable end 1
2Bolt 1
3Bracket 1
ProCarManuals.com

8-24
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
EXPLODED DIAGRAM
Step Procedure/Part name Q’ty Service points
4Nut 1
5 Steering cable 1
6 Seal 1
7 Speed sensor coupler 1
8Nut 1
9Cap 1
10 Screw 4
11 Speed sensor 1
12 Bolt 2 Deluxe model only
13 Shift cable holder 1 Deluxe model only
ProCarManuals.com

8-25
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
EXPLODED DIAGRAM
Step Procedure/Part name Q’ty Service points
14 Shift cable end 1 Deluxe model only
15 Grommet 1 Deluxe model only
16 Nut 1 Deluxe model only
17 Shift cable 1 Deluxe model only
18 Seal 1 Deluxe model only
Reverse the removal steps for installation.
ProCarManuals.com

8-26
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
SERVICE POINTS
WARNING
When routing the cables, do not grasp the
cable by the outer crimped sheath or steel
end. This could deform or loosen the cable
end due to extreme angles and or pressure.
Always hold the cables by the outer cover
below the crimp.
If a cable becomes damaged replace it.
Never attempt to repair a damaged cable.
Remote control cables inspection
1. Inspect:
Steering cable
Shift cable (Deluxe model only)
Frays/kinks/rough movement →

Replace.
Steering cable (jet pump end) installation
1. Install:
Steering cable
WARNING
The steering cable must be screwed in at
least 8 mm (0.31 in).
Steering cable set length
a
(jet pump end):
14.5 mm (0.57 in)
Steering cable stopper installation
1. Install:
Steering cable stopper
WARNING
Be sure to the steering cable stopper into
the groove in the outer cable as shown in
the illustration.
ProCarManuals.com

8-28
E
HULL
HOODSEAT AND HAND GRIP
SEAT AND HAND GRIP
EXPLODED DIAGRAM
REMOVAL AND INSTALLATION CHART
Step Procedure/Part name Q’ty Service points
SEAT AND HAND GRIP
REMOVALFollow the left “Step” for removal.
1 Seat assembly 1
2Bolt 2
3 Seat lock assembly 1
4 Nut/washer 4/4
5Bolt 4
6 Hand grip 1
7Bolt 1
10
11 10
12
8
4
2
3
9
7
5
6
1
6 × 40 mm
6.4 N • m (0.64 kgf • m, 4.6 ft • Ib)
2
6 × 30 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
15 N • m (1.5 kgf • m, 11 ft • Ib)
10 × 20 mm
26 N • m (2.6 kgf • m, 19 ft • Ib)
LT
271
LT
271
LT
271
ProCarManuals.com

8-29
E
HULL
HOODSEAT AND HAND GRIP
EXPLODED DIAGRAM
Step Procedure/Part name Q’ty Service points
8 Spring washer/washer 1/1
9 Projection 1
10 Nut/washer 2/2
11 Bolt 2
12 Seat bracket 1
Reverse the removal steps for installation.
10
11 10
12
8
4
2
3
9
7
5
6
1
6 × 40 mm
6.4 N • m (0.64 kgf • m, 4.6 ft • Ib)
2
6 × 30 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
6 × 23 mm
6.9 N • m (0.69 kgf • m, 5.0 ft • Ib)
15 N • m (1.5 kgf • m, 11 ft • Ib)
10 × 20 mm
26 N • m (2.6 kgf • m, 19 ft • Ib)
LT
271
LT
271
LT
271
ProCarManuals.com