2005 TOYOTA SIENNA Owners Manual

Page 49 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
41
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
To open the back door, push up the
back door opener and raise the door.
The back door can be opened when the
vehicle is stopped.

Page 50 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
42
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
CAUTION
Keep the back door closed while driv-
ing. This not only keeps the luggage
from being thrown out but also pre-
vents exha

Page 51 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
43
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
OPERATING THE DRIVER’S WINDOW
Use the switch on the driver’s door.
Normal operation: The window moves as
long as you hold the

Page 52 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
44
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
If the battery  is disconnected or  run
down, the power window may not operate
automatically and the jam protection func-
tion wi

Page 53 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
45
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
OPERATING THE PASSENGERS’
WINDOWS
Use the switch on each passenger ’s
door or the switches on the driver ’s
door that contr

Page 54 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
46
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
To open the quarter window, pull the
latch handle toward you and swing it
fully out.
When closing the window, make sure it is
com

Page 55 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
47
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
Be sure to remove the ignition key
when you leave your vehicle.
Never leave anyone (particularly a
small child) alone in your v

Page 56 of 516

TOYOTA SIENNA 2005 XL20 / 2.G Owners Manual 05 SIENNA_U (L/O 0409)
48
2005 SIENNA from Sep. ’04 Prod. (OM45431U)
3. Hold the hood open by inserting thesupport rod into the slot.
To insert the support rod into the slot,
move it straight up. If