I34702
*2 *4
*3 *1
I34711
Select a
color barEnter switch*1
05±1446
± DIAGNOSTICSNAVIGATION SYSTEM
AVENSIS REPAIR MANUAL (RM1018E)
(a) Display Check
DisplayContents
Color Bar Check/*1Color display is checked.
Remote Commander Check/*2Operating condition of navigation con-
troller assy is checked.
Vehicle Signal Check/*3Status of the vehicle signal which has
been loaded into the display is checked.
HINT:
In Display Check, above checks can be performed.
Display ItemMeaning
MENU/*4Pressing this switch returns to the ºDiag-
nosis MENUº.
(b) Color Bar Check Mode
(1) Start the Diagnosis System.
(2) Select ºMENUº.
(3) Select ºDisplay Checkº.
(4) Select ºColor Bar Checkº.
(5) Make sure that each color name is corresponding
to each color on the bar.
HINT:
Select Black, Red, Green, Blue, White and Stripe to display se-
lected colors and stripes on the entire screen.
(6) Compare with the Color Bar Check Mode in the
Navigation Check and make sure that no difference
is found.
Display ItemMeaning
Disp MENU/*1Pressing this switch returns to the ºDis-
play Checkº.
I34703
*1
*2
I34704
*1
± DIAGNOSTICSNAVIGATION SYSTEM
05±1447
AVENSIS REPAIR MANUAL (RM1018E)
(c) Remote Commander Check
(1) Start the Diagnosis system.
(2) Select ºMENUº.
(3) Select ºDisplay Checkº.
(4) Select ºRemote Commander Checkº.
(5) Press each switch and make sure that it corre-
sponds to the display on the screen.
Display DataDescription
Names of push±button switches/*1Names of push±button switches pressed
are navigation controller assy.
Disp MENU*2Pressing this switch returns to the ºDis-
play Checkº.
(d) Display Vehicle Signal Check
(1) Start the Diagnosis system.
(2) Select ºMENUº.
(3) Select ºDisplay Checkº.
(4) Select ºVehicle Signal Checkº.
(5) Check the status of the vehicle signal (Battery, IG,
PKB, SPEED, TAIL) loaded into the display.
HINT:
Vehicle signal data is updated every 1 second.
Display ItemMeaning
BatteryBattery voltage is displayed by V.
IGIG (Signal State) is displayed by ON/
OFF.
PKBIG (Signal State) is displayed by ON/
OFF. (IG switch ON)
SPEEDSPEED is displayed by calculating the
vehicle speed from the pulse signal.
TAILTAIL (Signal State) is displayed by ON/
OFF.
Disp MENU/*1Pressing this switch returns to the ºDis-
play Checkº.
