Page 465 of 502
0-18
RODIUS 2005.07
7410-01
SEAT
4. OPERATION OF FRONT SEAT(DRIVER'S SEAT)
1) Components
Sliding motor
Sliding rail
Seat position
(front up/down
rail) Seat warmer
connector
Seat position
(up/down
motor)
Seat position
(up/down rail)
Seat position
(rear up/down
motor)
Reclining motor
Page 466 of 502
0-19
SEAT
RODIUS 2005.07
7410-01
2) Operation of seat
Sliding
·
Seat moves from front to rea
r
controllde by sliding control switch
:
Seat position (front up/down)
·
Front side of seat moves up/down
controlled by seat position control
switch
:
Seat position (rear up/down)
·
Rear side of seat moves up/down
controlled by seat position control
switch
:
Page 467 of 502
0-20
RODIUS 2005.07
7410-01
SEAT
Seat height (up/down)
·
Seat moves up/down controlled by
seat height control switch
:
Reclining
·
Seat back reclining controlled by seat
reclining control switch
:
Seat reclining motor
Page 468 of 502
0-21
SEAT
RODIUS 2005.07
7410-01
3) Seat electrical equipment check
Disconnect the seat wiring connector and check if the power is supplied (Refer to the wiring
diagram)
·
1) If the power supply has no problem, remove the seat.
2) Check the motor and wiring if damaged.
3) Connect the battery to the seat connector.
4) Control the seat switch and check the opration.
- Electrical parts are not supplied by a part separately.
Page 469 of 502
0-22
RODIUS 2005.07
7410-01
SEAT
4) Operation of center seat
- Pull up the center seat when to jump
- Push down the center seat when to seat
5) Removal and installation of center seat (jumping seat)
- Unscrew 4 mounting nuts to remove the center seat
When seating
When jumping
Page 470 of 502
0-23
SEAT
RODIUS 2005.07
7410-01
5. OPERATION OF REAR SEAT
1) Rear 1st seat (swivel seat)
Seat back folding cable
Sliding cable
Seat back flat cable
Jumping
mechanism
Swivel lever Sliding lever
Page 471 of 502
0-24
RODIUS 2005.07
7410-01
SEAT
2) Operation of rear seat (Rear 1st and 2nd seat)
Seat sliding
Front
Rear
Page 472 of 502
0-25
SEAT
RODIUS 2005.07
7410-01
3) Seat back flat
Rear 1st
Rear 2nd
4) Seat back folding
- Fold the rear 1st or 2nd raw seat back to put something on or to utilize it as a table.
Rear 1st/2nd seat
-When to recline or to flat fully.