2005 SSANGYONG RODIUS torque

04-5
ENGINE INTAKE SYSTEM
RODIUS 2005.07
1715-01
2. RESONANCE FLAP
1) Function
A pneumatically actuated resonance flap (5)
is located on the intake manifold, and will be
opened and closed by load, which operates
resonance flap according to engine and
controlled by ECU and rpm.
Resonance flap closed (at idle/partial
load: less than 3,800 rpm)
The switch valve (7) will be adjusted by
ECU and resonance falp will be colosed.
By increasing air flow passage through
dividing intaking air flow toward both ai
r
collection housing (8).
This leads to a signficant increase in the
torque in the lower speed range. ▶
Resonance flap open (at full load:
over 3,800 rpm)
The switch valve (7) will not be adjusted
by ECU and resonance falp (5) will be
open. The collected air in the ai
r
collection housing (8) will not be divided
and intaking air passage will be shorten. ▶

09-13
ENGINE CONTROL SYSTEM
RODIUS 2005.07
0452-01
When driving (part/full throttle), the servo motor controls the throttle valve in line with the
various load states and according to the input signals from the pedal value sensor according to
the input signals from the pedal value sensor according to the position of the accelerator pedal.
The function of the EA (electronic accelerator) in the ECM determines the opening angle of the
throttle valve through the throttle actuator.
Further functions areDriving ▶
Idle speed control
Cruise control
Reducing engine torque for ASR/ABS
operation
Electronic accelerator emergency running
Storing faults
Data transfer through CAN -
-
-
-
-
-
-

0-3
DC 5-SPEED AUTOMATIC TRANSMISSION
RODIUS 2005.07
3650-01
2WD 4WD
3650-01DC 5-SPEED AUTOMATIC TRANSMISSION
1. OVERVIEW
DCAG 5-speed automatic transmission is an electronically controlled 5-speed transmission with
a lockup clutch in the torque converter.
The ratios for the gears are realized by three planetary gear sets. The 5th gear is designed with
a step-up ratio of 0.83 as an overdrive. The selector lever is controlled by electronically and
mechanically.
The gears are shifted by the corresponding combination of three hydraulically actuated
multiple-disc brakes, three hydraulically actuated multiple-disc clutches and two mechanical
one-way clutches.
This electronically controlled automatic transmission adjusts the operating pressure to provide
proper shifting in relation to engine power. This function improves shifting quality significantly.
And, the driver can select “S” (Standard) mode or “W” (Winter) mode according to the
driving conditions.
This automatic transmission provides two gears even during reverse driving.
The internal sensors and controls are connected to TCU by cylindrical 13-pin connector.
DCAG 5-speed automatic transmission offers the following advantages ▶
Improved shifting quality
More gears
Extended working life and reliability
Reduced fuel consumption -
-
-
-

0-4
RODIUS 2005.07
3650-01
DC 5-SPEED AUTOMATIC TRANSMISSION
2. STRUCTURE
Torque converter
Oil pump
Input shaft
Disc brake B1
Disc clutch C1
Disc clutch C2 1.
2.
3.
4.
5.
6.Disc brake B3
Disc clutch C3
Disc brake B2
Output shaft
Parking lock gear
Intermediate shaft 7.
8.
9.
10.
11.
12.Freewheel F2
Center planetary gear set
Electric control unit (valve body)
Freewheel F1
Stator shaft
Converter lockup clutch 13.
14.
15.
16.
17.
18.

0-9
DC 5-SPEED AUTOMATIC TRANSMISSION
RODIUS 2005.07
3650-01
1) Friction Disc
2) Tightening Torque

0-10
RODIUS 2005.07
3650-01
DC 5-SPEED AUTOMATIC TRANSMISSION
5. SPECIAL TOOLS AND EQUIPMENT
1) Special Tool
Name and Part Number Application
W 126 589 01 62 00
Handle Removal and installation of torque converter
Fixing automatic transmission
W 116 589 06 59 00
Assembly stand
Installation of sealing ring
W 140 589 12 15 00
Arbor
W 001 589 50 33 00
Puller
Removal and installation of
transmission housing ball housing

0-17
DC 5-SPEED AUTOMATIC TRANSMISSION
RODIUS 2005.07
3650-01
1) 1st Gear (3.932)
Torque converter lockup clutch
Engine speed
Transmission, input shaft
1st gear ratio
2nd gear ratio 16.
A.
B.
C.
D.3rd gear ratio
Mounting elements
Rear planetary gear set
Stator E.
F.
H.
L.Center planetary gear set
Impeller
Turbine wheel
Front planetary gear set M.
P.
T.
V.
Input shaft: Clockwise rotation
Front sun gear: Locked by F1 and B1, Planetary gear carrier: Rotation with
reduced speed
Rear ring gear: clockwise rotation
Rear sun gear: Locked by F2 and B2, Planetary gear carrier: Clockwise rotation
with reduced speed
Center ring gear: Clockwise rotation
Center sun gear: Locked by B2, Rotation with reduced speed
Output shaft: Clockwise rotation -
-
-
-
-
-
-
-
-
3) Overrun

0-18
RODIUS 2005.07
3650-01
DC 5-SPEED AUTOMATIC TRANSMISSION
2) 2nd Gear (2.408)
Torque converter lockup clutch
Engine speed
Transmission, input shaft
1st gear ratio 16.
A.
B.
C.2nd gear ratio
Mounting elements
Rear planetary gear set
Stator D.
E.
H.
L.Center planetary gear set
Impeller
Turbine wheel
Front planetary gear set M.
P.
T.
V.
Input shaft: Clockwise rotation
Sun gear and planetary gear carrier: Clockwise rotation by C1 activation
Rear ring gear: Clockwise rotation
Rear sun gear: Locked by F2 and B2, Planetary gear carrier: Rotation with reduced speed
Center ring gear: Clockwise rotation
Sun gear: Locked by B2, Planetary gear carrier: Rotation with reduced speed
Output shaft: Clockwise rotation -
-
-
-
-
-
-
3) Overrun