2005 SKODA OCTAVIA Nexus Navigation System Manual

Navigation23
Destination memoryStoring destination, stopover destination, flagged destination or location
Storing the different destinations means giving them a
name and storing them in the radio navigation system.
– After entering a new address, press (starting from the Naviga-
tion main menu) Ÿpage 16, fig. 13 , .
– Press to open the letter input menu.
– Enter a name for your destination, e.g. “Mr. Smith” or “Holiday home”.
– Press to save the destination with the name.The destination can now be called up from the memory as you need it. The
name should be short and clear. You can also use the names that are
suggested.
You enter the destination name in the same way used for entering a street
name Ÿpage 18.
back with ESC
Edit memory
Clear dest. memory Delete destinationSort destinations
Rename destination
Delete last dest. Save positionSave flagged dest.
Save stopover
Save dest.
Bra-0084
Fig. 24 Editing the
memory
Save destination
Save destination
back with ESC
Exhibition centre
Bra-0085
Fig. 25 Storing the
destination
Destination
Edit memory
Save dest.OK
sao.book Seite 23 Montag, 22. M‰
rz 2004 9:32 09

Navigation
24Renaming destination– Starting in the Navigation main menu Ÿpage 16, fig. 13 press
followed by then
.
– Turn the menu knob to move the orange bar to the name that you wish to change.
– Press the menu button to call up the entry function for the letters.
– Edit the name Ÿpage 18.
– If, however, you wish to keep the original name and not the new one, press the button Ÿpage 2, fig. 1 . Your
alterations will not be stored.
Rename
Rename: select
back with ESC
Bra-0086
Fig. 26 Renaming a
destination
Destination
Edit memory
Rename destination
ESC
A11
sao.book Seite 24 Montag, 22. M‰ rz 2004 9:32 09

Navigation25
Sorting destinations
The various different addresses in the destination memory
are stored chronologically according to their entry date
and can be sorted at a later date according to your require-
ments.
– Starting in the Navigation main menu Ÿpage 16, fig. 13 press
followed by then .
– Turn the menu knob to move the orange bar to the destination that you would like to move to another position.
– Press the menu knob. Sort: Store now appears at the top of
the screen. You can now move the address up or down by
turning the menu knob.
– Press to store the address in the new position. Sort:
Select now appears again at the top of the screen.
– Press the button Ÿ page 2, fig. 1 to close the sort
function.The other destinations will be moved down if you move a destination to a
position that is already occupied.
Last dest.
Sort back with ESC
Bra-0087
Fig. 27 Sort: Select
Sortback with ESC
Sort: save
Bra-0088
Fig. 28 Sort: Store
Destination
Edit memory
Sort destinations
OK
ESC
A11
sao.book Seite 25 Montag, 22. M‰
rz 2004 9:32 09

Navigation
26Deleting individual destinations or the entire destination memory
You can, in contrast to the "last destination" memory,
delete individual destinations from the destination
memory.
Deleting an individual entry
– Starting in the Navigation main menu Ÿpage 16, fig. 13 press
followed by then .
– Turn the menu knob to move the orange bar to the destination that you would like to delete and then press the menu knob.
– When asked for confirmation, press . If you do not wish to delete the destination, press .
Deleting the entire destination memory
– Starting in the Navigation main menu press followed by then .
– When asked for confirmation, press . If you do not wish to clear the destination memory, press .
CancelEdit memory
Delete
Clear dest. memory
back with ESC
Bra-0089
Fig. 29 Deleting desti-
nation memory
Delete
Delete: select
back with ESC
Bra-0090
Fig. 30 Selecting entry
to delete
Destination
Edit memory
Delete destination
Delete
Cancel
Destination
Edit memory
Clear dest. memory
Delete
Cancel
sao.book Seite 26 Montag, 22. M‰
rz 2004 9:32 09

Navigation27
Parameters for route calculationRoute options
– Press in the Navigation main menu Ÿpage 16,
fig. 13 .A short route might be quicker for your purpose in larger towns or cities
where there are a lot of traffic jams. Route options can be altered whilst
the route guidance function is active. The changed parameters will be
used as a basis for the calculation of the remaining journey.
Function keys in the route option menux
fast or short : Determines whether a fast or short route should be
calculated.
x
dynam. : Dynamic route guidance responds to traffic reports broadcast
by TMC stations. This function will automatically guide you round traffic
jams or blocked roads.
, or – Determines whether motorways, ferries or toll
roads should be used. These options will, however, be used for calculation
if there is no other logical route to the destination (e.g. an island is to be
used without using a ferry).
– Stores the selected settings for future route guidance usage.
Dynamic route guidance
An announcement that there are traffic jams on your route will be made if
a traffic jam is registered. You will also be warned directly before the traffic
jam itself.
Once the dynamic route guidance function has been activated you will be
informed that the route is being recalculated due to traffic problems if any
have been registered.
Traffic problems are indicated by a symbol on the map:
Route
with
with
without
without
back with ESC
Route options
short
Motorway Ferry
Toll fast
with without
by default dynam.
Bra-0091
Fig. 31 Route options
B
C
A
Bra-0092
Fig. 32 Symbols for
traffic problems
Route opt.
RouteMotorway
Ferry
To l l
by default
sao.book Seite 27 Montag, 22. M‰
rz 2004 9:32 09

Navigation
28w
Traffic jam Ÿpage 27, fig. 32
ƒ
Slow-moving traffic
‚
Road closed
The navigation system will calculate the quickest possible route when the
dynamic route guidance option is active. The system might well guide you
through a traffic jam if the diversion would be longer. Note
x
The dynamic route guidance option will only function if you are
receiving at least one TMC radio station.
x
The radio navigation system will automatically look for a new TMC
station if you leave the reception area of the one you are using. The station
you are listening to, however, does not have to be a TMC station.
x
The dynamic route guidance option will always use motorways, ferries
and toll roads.
x
The quality of the dynamic route guidance depends on the information
contained in the traffic announcements. The radio stations broadcasting
this information are responsible for the content.
Settings
The vehicle position can be entered manually and you can
then start a demonstration journey.
AA
AB
AC
DemoPos. on map Position Town
back with ESC
inactive
Syst. settings active
Set-up
Bra-0093
Fig. 33 Settings in the
Navigation main menu
Position Junction
25m ahead
Direction
Distance
back with ESC
Bra-0094
Fig. 34 Position
settings
sao.book Seite 28 Montag, 22. M‰
rz 2004 9:32 09

Navigation29
Entering your position
– Press in the Navigation main menu Ÿpage 16, fig. 13
to enter the vehicle position.
– Press . The entry window for the town appears. The entry for the street is made after you make your
entry and confirm it with . After confirming the name of the
street you will see a list of the streets which have an intersec-
tion with the named street.
– Select the intersection and confirm your choice by pressing the menu knob.
– Now enter your position either before or after this intersection in metres and also enter the direction of travel using the points
of the compass.
– Confirm your entry by pressing . The screen display will return to the Navigation main menu.
Entering your position on the map
– Press and then to see your set position on the map. The scale of the map can be altered using the two
top left-hand function keys.
– Press the button Ÿpage 2, fig. 1 twice to return to
the Navigation main menu.
Starting the demonstration
– Press and then select active. The navigation system is
activated. – The radio navigation system will now travel along the route
virtually from start to finish if the route guidance function is
started. You can listen to announcements and look at displays.
The navigation system will need some time for an exact definition of your
position if you have transported your vehicle using the train or a ferry. Your
position can be entered manually if the automatic definition is not
successful.
The manual position input can be used to calculate a route between any
two points regardless of where the vehicle is actually located.
Set-upPosition location
OK
OK
Set-up
Position map
ESC
A11
Demo
sao.book Seite 29 Montag, 22. M‰ rz 2004 9:32 09

Navigation
30Manually excluding stretches of the journey
Stretches of the journey ahead and/or parts of the route list
can be blocked manually.
Menu for blocking and traffic jams
– Press the traffic jam button Ÿpage 2, fig. 1 if you want to
block a stretch of the route ahead.
Entering traffic jam information
– Press Ÿfig. 35 .
– Turn the menu button to enter the length of the traffic jam.
– Press the menu knob. The display will be switched to the map. You will hear an announcement “The route is being calcu-
lated”. The excluded stretch of the route will be shown as a
dotted blue line on the map.
– Press Cancel exclusion option to include this stretch of the
route in the navigation option again.
Blocking part of the route list
– Press . You will see a part of your route list.
– Using the menu knob, move the orange bar to a line that starts with + or -. The stretches of the route are broken down into
sections and can be opened or closed by pressing or .
– Turn the menu knob to move the orange bar to the start of the section that you wish to exclude from the navigation. Press the
menu knob. The entry is now green.
Demo is active
Route opt.
CongestionCongest. ahead Cancel exclusion option
Enter exclusion
Congest. ahead
back with ESC
Route list
Route list
Cancel
Bra-0095
Fig. 35 Blockage and
traffic jam
Route list
Exclude route back with ESC
Bra-0096
Fig. 36 Blocking a
stretch of the journey
A10
Congest. aheadEnter exclusion
„
ƒ
sao.book Seite 30 Montag, 22. M‰
rz 2004 9:32 09