2005 Seat Leon 5D phone

Communication
20Calling a name in the phone book– Press the talk button
– After the tone, say the command SELECT NAME
After the system has recognised this command, you m ay select a stored entry
from the telephone book to call the required number . The system best recog-
nises names spoken by the person who stored the name.
Example for selecting a name from the internal telep hone book
A running dialogue can be cancelled at any time wi th a press of the talk
button .

Speech command
Condition
System cue
Effect
SELECT NAME
Phone is switched on, telephone book
contains entries.

Dialogue
COMPANY XYZ

Dialogue
If no command is specified, the system responds afte r about 5 seconds with the next cue.No command
back>
Dialogue
DIAL

Dialogue - The telephone number for
Company XYZ is being dialledEnd of dialogue

Comunica ingles Seite 20 Montag, 23. Mai 2005 1:49 13

Communication21
Operating instructions
Listening to the phone book
You can have the entries stored in the internal telephone book read out to y ou.– Press the talk button . The beep tone indicates that the
system is ready.
–Say the command PLAY PHONE BOOK.
After giving the command the system will read out th e entries stored in the
phone book. Press the talk button as an entry is being read to dial the
telephone number for that entry. Once the dialogue is complete and the
system is reactivated, you can also select an entry to call by specifying the
stored name.
Example for the PLAY PHONE BOOK command:
Example for selecting an entry:
To erase names from the phone book
You can delete entries from the internal telephone book.– Press the talk button . The beep tone indicates that the system is ready.
– After the tone, say the command DELETE NAME .
After giving this command you can delete a stored entry from the internal tele-
phone book.


Speech command
Condition
System cue
Effect
PLAY PHONE BOOK
The telephone book contains entries.
The telephone book will then be read
out.End of dialogue
Speech command
Condition
System cue
Effect
PLAY PHONE BOOK
The telephone book contains entries;
the talk button is pressed as the
entry is being read out.

The selected name will be repeated.
The telephone number will be dialled.End of dialogue


Comunica ingles Seite 21 Montag, 23. Mai 2005 1 :49 13

Communication
22Example for deleting single names from the internal t elephone book:
A running dialogue can be cancelled at any time with a pre ss of the talk
button .
Note
•
Say the command Repeat, if you would like to have the specified name
repeated by the system.
•
If you then say No, the system will answer with and the dialogue
will be ended.
To erase the phone book
You can delete the entire phone book or single entries.– Press the talk button .
– After the tone, say the command DELETE PHONE BOOK.After giving this command you can delete the entire internal phone book or
single entries as desired.Speech command
Condition
System cue
Effect
DELETE NAME
The telephone book contains entries.

Dialogue
COMPANY XYZ
pany XYZ?>
Dialogue
If no command is specified, the system responds afte r about 5 seconds with the next cue.
Dialogue
No command
back>
Dialogue
Ye s

DialogueEnd of dialogue


Comunica ingles Seite 22 Montag, 23. Mai 2005 1:49 13

Communication23
Operating instructionsExample for deleting the entire internal telephone bo
ok:
Example for deleting single names from the internal telephone book:
Speech command
Condition
System cue
Effect
DELETE PHONE BOOK
The telephone book contains entries.
phone book?>
Dialogue
If no command is specified, the system responds afte r about 5 seconds with the next cue.
Dialogue
No command

Dialogue
Ye s

Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
Dialogue
No command

Dialogue
Ye s

All entries in the phone book will be
deleted.End of dialogue
Speech command
Condition
System cue
Effect
DELETE PHONE BOOK
The telephone book contains entries.
phone book?>
Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
Dialogue
No command

Dialogue
NO
The telephone book will then be read
out.
No command
Talk button pressed as the entry to
be deleted is read out.
(name)?>
Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
Dialogue

Comunica ingles Seite 23 Montag, 23. Mai 2005 1:49 13

Communication
24Notes on the phone book
Take note of these tips and suggestions when using the
phone book.•
It is important that names stored in the phone book have a noticeable
acoustic difference between them so the system can r ecognise the entries.
•
In the event that an telephone book entry is not recognised (e.g. if
someone else tries to call-up a name), the phone book entries can be read out
by giving the command PLAY PHONE BOOK .
•
The numbers zero to nine are recognised by the system. Say the numbers
clearly so that the system can recognise them easily. Should the system say
, check the status of the
hands-free system as follows.
•
Is the phone switched on?
•
Has the PIN code been entered?
WARNING
The speech system must not be used in cases of emer gency, since the voice
changes in stressful situations. This could result in a failed or delayed tele-
phone connection. For this reason, always enter emer gency numbers
manually.
International calls
Country and area codes can be entered as follows.Notes on entering telephone numbers for calls abroa d:•
When making a call abroad, you can say Plus (+) before specifying the
digits.
•
After the Plus (+) the country code must be specified. The countr y code
follows the conventi onal format (e.g. 49 for Germany or 44 for Great Britain.
•
After the country code, the zero (0) should be left out before the area
code.No command

Dialogue
Ye s

The entry will be deleted and the
remaining entries will be read out.
All entries are read out.
End of dialogue
Comunica ingles Seite 24 Montag, 23. Mai 2005 1 :49 13

Communication25
Operating instructionsExample for making a call to Great Britain:
Bluetooth®
Bluetooth technology enables
wireless connections between
mobile and fixed devices without the need for cables.Mobile communication and information is gaining ever greater importance
for personal use as well as in today's modern business wor ld.
Information transfer between mobile devices up un til recently was only
possible through wired and infrared connections.
These non-standardised connections gr eatly limited the range of use and
were very complicated to operate.
For this reason, the introduction of the Bluetooth® tech nology represents a
great change, allowing the establishment of a s tandardised remote connec-
tion between mobile devices from different manufacturers.
WARNING
The Bluetooth function must be switched off during air travel (please refer
to the phone manual).
Note
Certain software version of some mobile telephones contain errors or limited
functions (for example “Download phon e book”). These errors may give rise
to faulty operation of the vehicle hands-free system. In th is case, consult the
Authorised Service Centre for your mobile telephone.Bluetooth® configuration
Before using the functionality of the Bluetooth connection
between the mobile telephone and the hands-free system for
the first time configuration of the connection is required.It will be necessary that the hands-free system and th e mobile telephone
recognise each other. To proceed, first the Bluetooth function on the mobile
telephone must be activated. Then, afte r turning on the ignition, select the
option on the telephone to search for other Bluetoot h communication devices
within range, in other words, the hands-free syst em of the vehicle
(SEAT_UHV). The next step is to select this hands-free sys tem. The complete
Speech command
Condition
System cue
Effect
DIAL NUMBER
Phone is switched on.

Dialogue
PLUS, FOUR, FOUR

Dialogue
SEVEN, THREE, ONE

Dialogue
THREE, NINE, TWO

Dialogue
DIAL

DialogueEnd of dialogue
Comunica ingles Seite 25 Montag, 23. Mai 2005 1:49 13

Communication
26instructions for completing this operat ion should be found in the instruction
manual for the telephone.
The final step for establishing the connection is the introduction of the PIN
code into the hands-free system (initi ally 1234). If you would like to change
the PIN code for the SEAT _UHV system then contact an of ficial SEAT work-
shop. Once the PIN code is input then the connecti on is established and the
system can be used with the Bluetooth system. The moment th at the connec-
tion is established, the hands-free kit will emit an acute sound.
Once the initial configuration process is finished, each ti me the telephone is
within range of establishing a Bluetooth connection w ith the hands-free
system this will be done automatically as long as the ignition is on and
without any need to configure the connection further .
The connection between the telephone and the hands-free system will not be
established if this system is already communicati ng with another phone.
If there are two or more Bluetooth te lephones within communication range of
the hands-free system then the system will connect with t he one that was
most recently connected.
Caution
The use of mobile telephones without an exterior ant enna generates strong
electromagnetic fields inside the vehicle.
Note
It is important to personalize the device PIN code usi ng a personal 4 digit
code. Consult an official SEAT workshop.
Radiophones and business equipmentRadiophones and fixed installation business equipmentRadiophones
Any retrofit installations of radiophones in the vehi cle require prior approval.
SEAT generally authorises in-vehicle installations of approv ed types of radio-
phones provided that:•
the aerial is installed correctly,
•
the aerial is installed on the exterior of the vehicle (and sh ielded cables
are used together with non- reflective aerial trimming),
•
the effective transmitting power does not exceed 10 Watts at the aerial
base.
Your Authorised Service Centre will be able to inform y ou about options for
installing and operating radiophones with a higher transmit ting power.
Business equipment
The retrofit of domestic and business equipment is pe rmitted provided that
these do not have an effect on the conc entration of the driver and that they
are CE approved. Equipment retrofitted to the vehicle th at may have an effect
on the concentration of the driver must come with a s pecific licence for this
type of vehicle and with the symbol CENote
•
The posterior fitting of electric and electronic equipment in this vehicle
affects its licence type and could lead to the with drawal of the vehicle regis-
tration document under certain circumstances.
•
We would request that you pay special attention to th e instructions
regarding the use of mobile telephones and radio tran smitters.
Comunica ingles Seite 26 Montag, 23. Mai 2005 1:49 13

Communication27
Operating instructions
Mobile radiophonesCommercial mobile telephones or radi o equipment might interfere with the
electronics of your vehicle. This can happen for the f ollowing reasons:•
no exterior antenna is fitted,
•
the external aerial is incorrectly installed,
•
transmitting power in excess of 10 watts.
Therefore we do not recommend the oper ation of portable mobile telephones
or radio equipment inside the vehicle without a c orrectly installed external
aerial.
Also, please note that the maximum range of the equipment can only be
achieved with an external aerial.
WARNING
The use of mobile telephones or radio equipment op erated inside the
vehicle without a properly installed external aeria l can create excessive
magnetic fields and could represent a health hazard.
Note
We would request that you pay special at tention to the instructions regarding
the use of mobile telephones and radio transmitters.
Comunica ingles Seite 27 Montag, 23. Mai 2005 1 :49 13