2005 Seat Cordoba ignition

70Opening and closing
C
Cl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s wwi
it
th
ho
ou
ut
t aau
ut
to
om
ma
at
ti
ic
c ccl
lo
os
si
in
ng
g ffu
un
nc
ct
ti
io
on
n*
*
Lift the switch by the front edge until the window is completely
closed.
P Pl
le
ea
as
se
e nno
ot
te
e tth
ha
at
t tth
he
e wwi
in
nd
do
ow
w ccl
lo
os
se
es
s wwi
it
th
ho
ou
ut
t ppo
ow
we
er
r lli
im
mi
it
ta
at
ti
io
on
n.
.
Function of the electric windows with ignition switched off
After the ignition has been switched off, the windows can still be
operated for about ten minutes as long as the driver or passenger
doors are not opened.
The windows on vehicles with central locking can also be closed or
opened from the outside (in cars with a sliding/electric roof you
can only close them). For this purpose, the key must be in the lock
of the driver’s door and held in the locking or open position.
O Op
pe
en
ni
in
ng
g
Press the front edge of the respective button.C Cl
lo
os
si
in
ng
g
Lift the front edge of the respective button.
N No
ot
te
e
If the window in the driver or passenger door is hindered whilst closing
through stiffness or by an obstacle (roll-back function), the window will
open again immediately.
In this case you can only close the window again after the ignition has been
switched on.
K
Notes
The automaticopening/closing function*on the driver and
passenger door windows will not function after the vehicle battery
has been disconnected/reconnected.
To reinstall this function after reconnecting the battery, please note
the following points.
•L Lo
oc
ck
k vve
eh
hi
ic
cl
le
e
from the outside via the driver’s door. When doing
this please ensure that all doors and windows are closed
completely.
•L Lo
oc
ck
k tth
he
e vve
eh
hi
ic
cl
le
e aag
ga
ai
in
n
via the driver’s door. H Ho
ol
ld
d tth
he
e kke
ey
y iin
n tth
he
e
l lo
oc
ck
ki
in
ng
g ppo
os
si
it
ti
io
on
n ffo
or
r aat
t lle
ea
as
st
t oon
ne
e sse
ec
co
on
nd
d.
.
The automaticclosing function* on the driver’s and passenger side
has been reactivated.
•T Ta
ak
ke
e ggr
re
ea
at
t cca
ar
re
e wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s!
! CCl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s iin
n aa
c ca
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d mma
an
nn
ne
er
r mma
ay
y cca
au
us
se
e bbr
ru
ui
is
se
es
s,
, ees
sp
pe
ec
ci
ia
al
ll
ly
y iin
n cch
hi
il
ld
dr
re
en
n.
.
•T
Th
he
e ddr
ri
iv
ve
er
r mmu
us
st
t wwa
ar
rn
n tth
he
e oot
th
he
er
r ooc
cc
cu
up
pa
an
nt
ts
s oof
f tth
he
e rri
is
sk
k wwh
hi
ic
ch
h cca
ar
re
el
le
es
ss
s
o op
pe
er
ra
at
ti
io
on
n oof
f eel
le
ec
ct
tr
ri
ic
c wwi
in
nd
do
ow
ws
s een
nt
ta
ai
il
ls
s.
.
K
W WA
AR
RN
NI
IN
NG
G


71 Opening and closing
Safety FirstControls and equipment Tips and Maintenance Technical Data
O
Op
pe
en
ni
in
ng
g rro
oo
of
f*
*
Opening and closing the opening roof
With the ignition on, the opening sunroof opens and closes
through the rotary control.
After switching ignition off, and while the driver and front
passenger doors are not opened, the sunroof may still be opened
or closed during the first 10 minutes.
•B Be
e vve
er
ry
y cca
ar
re
ef
fu
ul
l wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s aan
nd
d rro
oo
of
f ffr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e!
!
•B
Be
e vve
er
ry
y cca
ar
re
ef
fu
ul
l wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s!
! CCl
lo
os
si
in
ng
g ffr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e
w wi
it
th
ho
ou
ut
t vvi
is
si
ib
bi
il
li
it
ty
y oor
r iin
n aa cca
ar
re
el
le
es
ss
s mma
an
nn
ne
er
r cca
an
n cca
au
us
se
e sse
er
ri
io
ou
us
s iin
nj
ju
ur
ry
y,
,
e es
sp
pe
ec
ci
ia
al
ll
ly
y wwi
it
th
h cch
hi
il
ld
dr
re
en
n.
.
•C
Ch
hi
il
ld
dr
re
en
n ssh
ho
ou
ul
ld
d nne
ev
ve
er
r rre
em
ma
ai
in
n aal
lo
on
ne
e iin
ns
si
id
de
e tth
he
e vve
eh
hi
ic
cl
le
e wwh
he
en
n iit
t iis
s llo
oc
ck
ke
ed
d
f fr
ro
om
m tth
he
e oou
ut
ts
si
id
de
e,
, aas
s oou
ut
ts
si
id
de
e hhe
el
lp
p wwi
il
ll
l bbe
e hhi
in
nd
de
er
re
ed
d iin
n tth
he
e eev
ve
en
nt
t oof
f aan
n
e em
me
er
rg
ge
en
nc
cy
y.
.
K
W WA
AR
RN
NI
IN
NG
G
Fig. 53
•T Ta
ak
ke
e cca
ar
re
e wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e rro
oo
of
f!
! CCl
lo
os
si
in
ng
g tth
he
e rro
oo
of
f cca
ar
re
el
le
es
ss
sl
ly
y oor
r iin
n aan
n
u un
nc
co
on
nt
tr
ro
ol
ll
le
ed
d mma
an
nn
ne
er
r mma
ay
y ppr
ro
od
du
uc
ce
e bbr
ru
ui
is
se
es
s.
. TTh
ha
at
t iis
s wwh
hy
y wwh
he
en
n lle
ea
av
vi
in
ng
g tth
he
e
v ve
eh
hi
ic
cl
le
e rre
em
mo
ov
ve
e tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y.
.
W
WA
AR
RN
NI
IN
NG
G
B
D
A
C
AR0-012


74Lights and visibility
L
Li
ig
gh
ht
ts
s aan
nd
d vvi
is
si
ib
bi
il
li
it
ty
y
S
Sw
wi
it
tc
ch
he
es
s
Switching lights on and off
L
Li
ig
gh
ht
ti
in
ng
g ssw
wi
it
tc
ch
h 1
– Switched off1)
– Side lights
– Dipped or main beamThe headlights only work when the ignition is on. When switching
ignition on and after ignition is switched off the side lights are
automatically switched on.
Dipping and flashing the headlights
⇒"Flashers and high beam
lever" chapter.
N No
ot
te
e
If lights are not switched off and the ignition key is removed, a buzzer* will
sound when the driver’s door is open.
F Fr
ro
on
nt
t ffo
og
g lli
ig
gh
ht
ts
s*
*
Place the light switch in the side lights or dipped/main beam
position and pull to first stop.
R Re
ea
ar
r ffo
og
g lli
ig
gh
ht
t*
*
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
ho
ou
ut
t ffo
og
g lli
ig
gh
ht
ts
s
Turn lighting switch to dipped/main beam position and pull switch
out to top.
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
h ffo
og
g lli
ig
gh
ht
ts
s
With lighting switch in dipped/main beam position, pull switch out
to 2nd detent.
N No
ot
te
e
•A warning lamp in the instrument panel lights up when the rear fog light
is switched on.
•Due to the amount of dazzle it causes, the rear fog light should only be
switched on when the visibility is very poor (e.g. in some E.U. countries,
below 50 metres).
0
o
123
IBN-007Fig. 56
1)Vehicles for some countries: when the ignition is switched on, the dipped beam is
also switched on.


75 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
The electrical system of the factory fitted tow bar* is wired up so that when
towing a trailer fitted with rear fog lights, the rear fog lights on the towing
vehicle are automatically switched off.
K
Instrument and switch lighting /
Headlight range control
I In
ns
st
tr
ru
um
me
en
nt
t lli
ig
gh
ht
ti
in
ng
g 2
When the lights are on, the level of the instrument lighting can be
set to any intensity by turning the knurled wheel next to the light
switch.
H He
ea
ad
dl
li
ig
gh
ht
t rra
an
ng
ge
e cco
on
nt
tr
ro
ol
l*
*
3
With the electrical range control the headlight settings can be
matched exactly to the load condition of vehicle. This prevents
oncoming traffic from being dazzled more than is unavoidable. Atthe same time the correct headlight beam setting provides the
best possible visibility for the driver.
The headlights can only be regulated with the dipped headlights
switched on.
To lower the beams, turn knurled discfrom the basicposition (0)
downwards.
K
Heated rear window 4
Only works if the engine is running. A lamp in the switch lights up
when connected.
The heating device of the rear window disconnects automatically
after 20 minutes. If the key is pressed again after 20 minutes have
passed, the heated rear windscreen will remain on until the
ignition is switched off.
o
123
IBN-007Fig. 57
Fig. 58
VOLT12
16
CON-012


76Lights and visibility
N
No
ot
te
e
An automatic provisional disconnection of the function may take place to
avoid a possible deterioration to the battery. Once the normal functioning
conditions are established the function is resumed.
F Fo
or
r tth
he
e ssa
ak
ke
e oof
f tth
he
e een
nv
vi
ir
ro
on
nm
me
en
nt
t
As soon as window is clear, switch element off. The reduced current
consumption helps to reduce fuel consumption ⇒page 140.K
Hazard warning lamps5
The system also works when the ignition is switched off.
Switch on the hazard warning lamps if, for example:
– Your vehicle stops because of a technical defect,
– You have an emergency– You reach the tail end of a traffic jam.
When the hazard warning lamps are switched on, all turn signal
lights flash simultaneously. The warning lamps for the indicators
and a warning lamp in the switch will also flash.
O Ob
bs
se
er
rv
ve
e lle
eg
ga
al
l rre
eq
qu
ui
ir
re
em
me
en
nt
ts
s wwh
he
en
n eem
mp
pl
lo
oy
yi
in
ng
g ssu
uc
ch
h ssa
af
fe
et
ty
y
m me
ea
as
su
ur
re
es
s.
.
K
Seat heating* for left seat
For further information on its functions⇒"Heated seats" chapter.K
Seat heating* for right seat
For further information on its functions⇒"Heated seats" chapter.K
Switches in driver’s door
E
El
le
ec
ct
tr
ri
ic
c wwi
in
nd
do
ow
ws
s
To use the electric windows switches⇒"Electric windows" chapter.
C
Ce
en
nt
tr
ra
al
l llo
oc
ck
ki
in
ng
g bbu
ut
tt
to
on
n
To use this switch ⇒"Central locking" chapter.
W
Wi
in
ng
g mmi
ir
rr
ro
or
r aad
dj
ju
us
st
tm
me
en
nt
t
⇒"Rear-view mirrors" the chapter.KFig. 59
VOLT12
1654
CON-012

77 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
S
Sw
wi
it
tc
ch
he
es
s iin
n tth
he
e cce
en
nt
tr
ra
al
l cco
on
ns
so
ol
le
e
Traction Control System (TCS)*. Electronic stabilisation
program (ESP)*
The TCS or ESP connect automatically when the engine is switched
on. If necessary, they may be switched off briefly by pressing the
corresponding switch.
If it is connected a pilot light will light.
For further information
⇒pages 131 to 134.
N No
ot
te
e
The location of the switches can vary depending on the model version or
country.K
V Vi
is
si
ib
bi
il
li
it
ty
y
Sun visors
The sun visors can be pulled out of the side mountings and swung
towards to the doors.
The make-up mirrors* are fitted with a sliding cover.
K
L Li
ig
gh
ht
ts
s
Flashers and high beam lever
The turn signals only work when the ignition is switched on.
• Right turn signals – lever up
1
Fig. 60
Fig. 61
CON-0131
0 234
5
6
7
8
rpm x 1000
o
1
2
B6L-0006


78Lights and visibility
• Left turn signals – lever down2
When turn signals are working, the warning lamp flashes as well⇒
"Warning lamps" chapter.
The turn signals switch off automatically when the steering wheel
returns to its normal position.
T To
o ssi
ig
gn
na
al
l aa lla
an
ne
e cch
ha
an
ng
ge
e
For rapid manoeuvres such as lane changes, lift
1or press down2the lever only to the point of pressure and hold it in position.
If the lever is used with a slight pulsation the indicator will blink
three times.
H He
ea
ad
dl
li
ig
gh
ht
t ffl
la
as
sh
he
er
r
Pull the lever towards the steering wheel
3– the main beam
warning lamp will light up.
H Hi
ig
gh
h bbe
ea
am
m lli
ig
gh
ht
t
To engage the high beam lights, push the lever forward with the
low beam lights connected
4. The corresponding warning lamp
will light up when the high beam light is on.
P Pa
ar
rk
ki
in
ng
g lli
ig
gh
ht
ts
s*
*
The parking lights only work when ignition is switched off.
Right parking lights – lever up
1
Left parking lights – lever down2
If the ignition key has been removed, a buzzer* will sound when
the driver’s door is open.N No
ot
te
e
The use of the signals and lighting described here is subject to local
regulations.K
I In
nt
te
er
ri
io
or
r lli
ig
gh
ht
ts
s
Front interior light
Switch positionsA:
0–Off
Right – Door contact switch
Left – Light on continuously
B45-144CFig. 62


79 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
Interior lights with delayed switch off* remain on for about 30
seconds after doors are closed.
K
Front reading light*
The reading light is turned on or off by pressing the appropriate
switch B.K
Glove compartment light*
The passenger’s glove compartment light only lights up when the
lights are switched on and the glove compartment lid is open.
K
Switch on interior light
The interior light is switched on for approx. 30 seconds when the
vehicle is unlocked, a door is opened or the ignition key is
removed. Hence, the interior light switch must be in the door
contact position.
It is switched off immediately as soon as the vehicle is locked or
the ignition switched on.
With the door open, the interior light will remain switched on for a
maximum of ten minutes. This avoids unnecessary battery
discharge.
N No
ot
te
e
In vehiclesw wi
it
th
ho
ou
ut
t cce
en
nt
tr
ra
al
li
is
se
ed
d llo
oc
ck
ki
in
ng
g,
,
the interior light can o on
nl
ly
y
be
switched on by opening the driver's door or by manually pressing the
switch.
K
B45-144CFig. 63