2005 Seat Cordoba ignition

44Instrument panel
Ø
Ø kkm
m/
/h
h -- AAv
ve
er
ra
ag
ge
e ssp
pe
ee
ed
d
The same applies here as to "average fuel consumption".
k km
m -- DDi
is
st
ta
an
nc
ce
e ddr
ri
iv
ve
en
n
The same applies to "distance driven" as to "driving time"
⇒ page
43
. The maximum distance displayed is of 9,999 km.
k km
m -- AAu
ut
to
on
no
om
my
y
This value indicates the remaining mileage you can drive the
vehicle with the same driving style.
The base to calculate the remaining fuel is the average fuel
consumption for the last 50 km.
When the remaining fuel function is reset (i.e. after disconnecting
battery) the real value for remaining fuel is displayed after driving
approx. 50 km.
Ø Ø ll/
/1
10
00
0 kkm
m -- AAv
ve
er
ra
ag
ge
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
Indicates average fuel consumption, not instantaneous fuel
consumption.
After switching ignition on or after deleting the corresponding
memory, average fuel consumption is displayed after approx. 300
m. Up to that point, the screen displays dashes instead of the
value. The value is updated every 30 m while driving.
M Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 11
– Indicates the average fuel consumption
of a partial trip.M Mu
ul
lt
ti
if
fu
un
nc
ct
ti
io
on
n iin
nd
di
ic
ca
at
to
or
r 22
– Indicates the average fuel consumption
of all partial trips
⇒"memory of total trip".
N No
ot
te
e
The quantity of fuel used is not indicated.
l
l/
/1
10
00
0 kkm
m -- IIn
ns
st
ta
an
nt
t cco
on
ns
su
um
mp
pt
ti
io
on
n
It indicates the current l/100 km consumption.
The consumption is calculated in 1 second intervals. When the
vehicle is stopped, the consumption is indicated in l/h.
° °C
C -- EEx
xt
te
er
ri
io
or
r tte
em
mp
pe
er
ra
at
tu
ur
re
e
The correct exterior temperature is displayed after five minutes.
With a stationary vehicle or at very low speeds the displayed
temperature may be slightly higher than the real exterior
temperature due to engine heat.
Selector lever position display*
The selector lever position for automatic gearboxes is shown in the
display
⇒"Automaticgearbox" chapter. K
I If
f yyo
ou
u uus
se
e tth
he
e oou
ut
ts
si
id
de
e tte
em
mp
pe
er
ra
at
tu
ur
re
e aas
s aan
n iin
nd
di
ic
ca
at
to
or
r ffo
or
r iic
ce
e,
, kke
ee
ep
p iin
n mmi
in
nd
d tth
ha
at
t
i ic
ce
e cca
an
n bbe
e ffo
or
rm
me
ed
d aat
t aa tte
em
mp
pe
er
ra
at
tu
ur
re
e aab
bo
ov
ve
e 00°
°C
C.
.
K
W WA
AR
RN
NI
IN
NG
G

45 Instrument panel
Safety FirstControls and equipment Tips and Maintenance Technical Data
Mileage display or Service Interval Display
M
Mi
il
le
ea
ag
ge
e ccl
lo
oc
ck
k // TTr
ri
ip
p mmi
il
le
ea
ag
ge
e
The upper counter registers the total distance driven and the lower
one the short trips.
The last figure of the lower counter indicates 100 m.
The trip mileage can be put back to zero by pressing the reset knob
next to the speedometer (partial mileage clock).
S Se
er
rv
vi
ic
ce
e IIn
nt
te
er
rv
va
al
l IIn
nd
di
ic
ca
at
to
or
r*
*
If a service is due the lower indicator (trip mileage indicator) will
display the following maintenance messages:
O OI
IL
L
– engine oil change
I IN
NS
SP
P
– maintenance serviceThe maintenance service will switch off three minutes after the
engine is switched on. You can also change to the trip mileage by
pressing the reset button (for more than 0.5 seconds)
1).
The Technical Service Centre that carries out the maintenance
service will reset the maintenance interval indicator once the
service is done.
I It
t iis
s rre
ec
co
om
mm
me
en
nd
de
ed
d tth
ha
at
t rre
ep
pa
ai
ir
r aan
nd
d mma
ai
in
nt
te
en
na
an
nc
ce
e wwo
or
rk
k bbe
e cca
ar
rr
ri
ie
ed
d
o ou
ut
t eex
xc
cl
lu
us
si
iv
ve
el
ly
y bby
y aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e.
.
The service interval indicator can also be reset with the trip
mileage button. Proceed as follows:
1 – "Ignition OFF"
2 – Keep pressing the "reset" button of the trip mileage clock.
3 – "Ignition ON" while pressing the "reset" button. The current
event will be statically displayed.
4 – After at least 10 seconds release the reset button.
a) With an event:
– If the button is not released the indication "----" will be
displayed and the event is reset.
b) With several events:
– The first event is reset and the following event is indicated
statically according to the priorities.
– Repeat the procedure (from point 1 on) for the next event.
40
20
0 60
180
220
260
10 3050160
200
240
PRND43214956
OI L
IBN-121Fig. 39
1)With "Ignition OFF" the maintenance indication remains visible on the display.


48Instrument panel
Alternator
The warning lamp comes on when the ignition is switched on and
must go out when the engine is started.
The alternator is driven by a long-life ribbed belt.
If the warning lamp lights during the journey, s st
to
op
p,
, ssw
wi
it
tc
ch
h oof
ff
f
e en
ng
gi
in
ne
e
and check ribbed belt.
If it isl lo
oo
os
se
e
or broken, d do
o nno
ot
t ddr
ri
iv
ve
e oon
n
– the coolant pump is no
longer being driven. The belt must be checked/ renewed.
If the warning lamp comes on even though the ribbed belt is not
broken or loose, you can generally wait to have this checked at the
next scheduled service.
As the battery will continue to discharge, all electrical consumers
which are not absolutely necessary should be switched off.
K
Parking light/dipped beam
Dipped beam, parking or side light pilot light (green). Works with
the ignition off.
K
Power steering*
The warning lamp will light up for a few seconds as a functional
check when the ignition is switched on.
The warning lamp comes on when the hydraulic oil level is not
sufficient or in case of a failure in the electrical system.
An acoustic signal warns the driver (1 bip).
Contact a Technical Service Centre.
I It
te
em
mS
Sy
ym
mb
bo
ol
lM
Me
ea
an
ni
in
ng
g oof
f wwa
ar
rn
ni
in
ng
g aan
nd
d cco
on
nt
tr
ro
ol
l lla
am
mp
ps
sF
Fu
ur
rt
th
he
er
ri
in
nf
fo
or
rm
ma
at
ti
io
on
n
5Indicators⇒page 49
6Coolant temperature/level*⇒page 49
7Main beam⇒page 50
8Fuel level*⇒page 50
9Anti-lock brake system (ABS)*⇒page 50
10Brakes/Hand brake
11Air Bag system1)⇒page 51
12Seat belt warning lamp*⇒page 51
13Engine diagnosis*⇒page 51
14Traction Control System (TCS)*/⇒page 51
14Electronic stabilisation program (ESP)*⇒page 52
15Electronic immobiliser*⇒page 52
16Engine oil pressure/level⇒page 52
17Trailer indicators*⇒page 53
1)This equipment will vary according to the country.
K

⇒page
50-51

49 Instrument panel
Safety FirstControls and equipment Tips and Maintenance Technical Data
N
No
ot
te
e
When towing the car with the engine shut down or in case of a breakdown
in the servo-steering mechanism, the power steering remains out of order.
Nonetheless, the vehicle continues to be steerable even though the effort to
handle the steering wheel is bigger.
K
Accelerator pedal faults (EPC)*
If there is a fault in the accelerator pedal working, a warning lamp
will go on. Have the fault repaired at a Technical Service Centre.
K
Glowplugs
(Diesel engines only)
When the engine isc co
ol
ld
d
the warning lamp comes on when key is
turned to Drive position (ignition on).
If the warning lamp does not come on, there is a defect in the glow
plug system – call in expert assistance.
When the lamp goes out, start the engine immediately
⇒"Starting
the engine" chapter.
When the engine isw wa
ar
rm
m
the glow plug lamp does not come on –
the engine can be started straight away.
N No
ot
te
e
If a fault occurs in the diesel engine management system, it will indicated
by a flashing warning lamp. In this case, have the engine checked
immediately by a Technical Service Centre.
K
Indicators
The pilot light flashes at the same time as the indicator. If a turn
signal fails, the warning lamp flashes twice as fast. (Not when
towing a trailer).
For more information
⇒"Flashers and high beam lever" chapter.K
Coolant temperature/level*
The warning lamp* lights up for a few seconds as a functional
check when ignition is switched on.
If the lamp does not go out afterwards or lights up or flashes when
driving, either the coolant temperature is too high or the coolant
level too low. An acoustic signal will sound 3 times as an
additional warning:
S St
to
op
p,
, ssw
wi
it
tc
ch
h een
ng
gi
in
ne
e oof
ff
f
and check level. Add coolant if necessary.
• • NNe
ev
ve
er
r oop
pe
en
n tth
he
e bbo
on
nn
ne
et
t oof
f yyo
ou
ur
r cca
ar
r iif
f yyo
ou
u sse
ee
e sst
te
ea
am
m oor
r cco
oo
ol
la
an
nt
t cco
om
mi
in
ng
g
f fr
ro
om
m tth
he
e een
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t –– RRi
is
sk
k oof
f ssc
ca
al
ld
di
in
ng
g!
! WWa
ai
it
t uun
nt
ti
il
l nno
o mmo
or
re
e sst
te
ea
am
m
o or
r cco
oo
ol
la
an
nt
t cca
an
n bbe
e sse
ee
en
n.
.
• • DDo
o nno
ot
t tto
ou
uc
ch
h tth
he
e ffa
an
n.
. TTh
he
e ffa
an
n cca
an
n ssw
wi
it
tc
ch
h oon
n ssu
ud
dd
de
en
nl
ly
y –– eev
ve
en
n wwh
he
en
n tth
he
e
e en
ng
gi
in
ne
e iis
s ssw
wi
it
tc
ch
he
ed
d oof
ff
f.
.
• • PPl
le
ea
as
se
e nno
ot
te
e tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g ppo
oi
in
nt
ts
s tto
o aav
vo
oi
id
d ssc
ca
al
ld
di
in
ng
g wwi
it
th
h hho
ot
t cco
oo
ol
la
an
nt
t:
:
– – EEx
xe
er
rc
ci
is
se
e cca
au
ut
ti
io
on
n wwh
he
en
n oop
pe
en
ni
in
ng
g tth
he
e cco
oo
ol
la
an
nt
t eex
xp
pa
an
ns
si
io
on
n tta
an
nk
k!
! WWh
he
en
n tth
he
e
W
WA
AR
RN
NI
IN
NG
G


50Instrument panel
Main beam
The warning lamp comes on when main beam is on or when the
headlight flasher is used.
K
Fuel level*
The warning lamp comes on when there are about 7 litres left in
the tank. The warning lamp will light up for a few seconds as a
functional check when the ignition is switched on.
K
Anti-lock brake system (ABS)*
A warning lamp system monitors the ABS.
The warning lamp should light up for a few seconds when the
ignition is switched on. It goes out again after the system has run
through an automatictest sequence.
There is a fault in the ABS if:
• The ABS warning lamp does not light up when the ignition is
switched on.
• The warning lamp does not go out again after a few seconds.
• The warning lamp lights up when the vehicle is moving.
The vehicle can still be braked in the normal way (except that the
ABS control function is out of action). Take the vehicle to the
Authorised Technical Service as soon as possible. For more
information
⇒pages 131 to 134.
If a fault occurs in the ABS, the ESP warning lamp will also light
up*.
Brakes
The warning lamp comes on when the brake fluid level is too low.
The ignition must be switched on.
In vehicles with the Anti-locking Brake System (ABS), the warning
lamp will light up for a few seconds after switching the ignition on
or starting the engine. If the ABS system fails, the brake system
warning lamp may light up together with the ABS warning lamp.
e en
ng
gi
in
ne
e iis
s hho
ot
t tth
he
e cco
oo
ol
li
in
ng
g ssy
ys
st
te
em
m iis
s uun
nd
de
er
r ppr
re
es
ss
su
ur
re
e –– DDa
an
ng
ge
er
r oof
f ssc
ca
al
ld
di
in
ng
g!
!
T Th
he
er
re
ef
fo
or
re
e lle
et
t een
ng
gi
in
ne
e cco
oo
ol
l ddo
ow
wn
n bbe
ef
fo
or
re
e uun
ns
sc
cr
re
ew
wi
in
ng
g tth
he
e cca
ap
p!
!
– – TTo
o ppr
ro
ot
te
ec
ct
t yyo
ou
ur
r ffa
ac
ce
e,
, hha
an
nd
ds
s aan
nd
d aar
rm
ms
s yyo
ou
u ssh
ho
ou
ul
ld
d cco
ov
ve
er
r tth
he
e cca
ap
p oof
f tth
he
e
r ra
ad
di
ia
at
to
or
r wwi
it
th
h aa lla
ar
rg
ge
e,
, tth
hi
ic
ck
k ccl
lo
ot
th
h tto
o ppr
ro
ot
te
ec
ct
t aag
ga
ai
in
ns
st
t sst
te
ea
am
m oor
r hho
ot
t ffl
lu
ui
id
d.
.
• • EEn
ns
su
ur
re
e tth
ha
at
t tth
he
e cco
oo
ol
la
an
nt
t lli
iq
qu
ui
id
d ddo
oe
es
s nno
ot
t ddr
ro
op
p oon
n tth
he
e hho
ot
t eex
xh
ha
au
us
st
t oor
r aan
ny
y
o ot
th
he
er
r hho
ot
t een
ng
gi
in
ne
e cco
om
mp
po
on
ne
en
nt
ts
s.
. TTh
he
e aan
nt
ti
if
fr
re
ee
ez
ze
e cco
on
nt
ta
ai
in
ne
ed
d iin
n tth
he
e cco
oo
ol
la
an
nt
t
c co
ou
ul
ld
d iig
gn
ni
it
te
e.
.
K
W WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
• • BBe
ef
fo
or
re
e oop
pe
en
ni
in
ng
g tth
he
e bbo
on
nn
ne
et
t,
, rre
ea
ad
d aan
nd
d oob
bs
se
er
rv
ve
e tth
he
e wwa
ar
rn
ni
in
ng
gs
s iin
n tth
he
e cch
ha
ap
pt
te
er
r
“ “E
En
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t”
”.
.
• • IIf
f tth
he
e bbr
ra
ak
ke
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s uup
p tto
og
ge
et
th
he
er
r wwi
it
th
h tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
p,
,
s st
to
op
p tth
he
e vve
eh
hi
ic
cl
le
e iim
mm
me
ed
di
ia
at
te
el
ly
y aan
nd
d cch
he
ec
ck
k tth
he
e bbr
ra
ak
ke
e ffl
lu
ui
id
d lle
ev
ve
el
l
⇒“
“B
Br
ra
ak
ke
e
f fl
lu
ui
id
d.
.”
” IIf
f tth
he
e ffl
lu
ui
id
d lle
ev
ve
el
l hha
as
s ddr
ro
op
pp
pe
ed
d bbe
el
lo
ow
w tth
he
e ““M
MI
IN
N”
” mma
ar
rk
k yyo
ou
u mmu
us
st
t nno
ot
t
d dr
ri
iv
ve
e oon
n.
. RRi
is
sk
k oof
f aac
cc
ci
id
de
en
nt
t.
. OOb
bt
ta
ai
in
n tte
ec
ch
hn
ni
ic
ca
al
l aas
ss
si
is
st
ta
an
nc
ce
e.
.
K
W WA
AR
RN
NI
IN
NG
G


51 Instrument panel
Safety FirstControls and equipment Tips and Maintenance Technical Data
Hand brake
The pilot light will come on when the hand brake is set and the
ignition is switched on. It should go out when the hand brake is
taken off.
K
Air Bag system*
When the ignition is turned on, the warning light will remain lit for
a few seconds.
If the warning light flashes for about 12 seconds following
engagement of the ignition, this means that at least one Air Bag
has been disconnected in a Technical Service
⇒“Deactivation of
the Air Bag”.
T Th
he
er
re
ef
fo
or
re
e iif
f tth
he
e wwa
ar
rn
ni
in
ng
g lli
ig
gh
ht
t ddo
oe
es
s nno
ot
t ffl
la
as
sh
h oor
r iit
t lli
ig
gh
ht
ts
s oor
r ffl
la
as
sh
he
es
s
w wh
hi
il
le
e tth
he
e vve
eh
hi
ic
cl
le
e iis
s iin
n uus
se
e,
, iit
t mme
ea
an
ns
s tth
ha
at
t tth
he
er
re
e iis
s ppr
ro
ob
bl
le
em
m wwi
it
th
h tth
he
e
A Ai
ir
r BBa
ag
g.
. PPr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e tto
o sso
ol
lv
ve
e tth
he
e
p pr
ro
ob
bl
le
em
m.
.
K
Seat belt warning lamp*
The warning lamp lights up (only for certain countries) for about6
seconds after ignition as a reminder to fasten your safety belt.
If the seat belt is not fastened, in some countries an acoustic
signal will sound after switching on the ignition which will stop
after approximately 6 seconds or when the seat belt is fastened.
N No
ot
te
e
Please refer to chapter “Seat belts”. K
Engine diagnosis*
This pilot light comes on when the ignition is switched on as a test
and switches off after a few seconds.
In case of a failure in the engine’s electrical system, the warning
lamp will light up again. If this occurs, go to the nearest Technical
Service Centre.
K
Traction Control System (TCS)*
The traction control system prevents the drive wheels from
spinning when the car is accelerating.
The warning lamp lights up when the ignition is switched on and
should turn off after a few seconds.
When the TCS is operating while driving, the warning lamp flashes.
If the system is deactivated or if there is any fault in the same, the
warning lamp will remain lit.
T Th
he
e lle
ev
ve
el
l oof
f bbr
ra
ak
ke
e ffl
lu
ui
id
d iin
n tth
he
e rre
es
se
er
rv
vo
oi
ir
r iis
s tto
oo
o llo
ow
w iif
f tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p ddo
oe
es
s
n no
ot
t ggo
o oof
ff
f oor
r iif
f iit
t lli
ig
gh
ht
ts
s uup
p wwh
hi
il
le
e ddr
ri
iv
vi
in
ng
g.
. PPr
ro
oc
ce
ee
ed
d iim
mm
me
ed
di
ia
at
te
el
ly
y tto
o tth
he
e nne
ea
ar
re
es
st
t
T Te
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e aan
nd
d hha
av
ve
e tth
he
e bbr
ra
ak
ke
e ssy
ys
st
te
em
m eex
xa
am
mi
in
ne
ed
d.
.
M Me
ea
an
nw
wh
hi
il
le
e yyo
ou
u wwi
il
ll
l hha
av
ve
e tto
o ppr
re
es
ss
s hha
ar
rd
de
er
r oon
n tth
he
e bbr
ra
ak
ke
e ppe
ed
da
al
l aan
nd
d bbr
ra
ak
ki
in
ng
g
d di
is
st
ta
an
nc
ce
es
s wwi
il
ll
l bbe
e ggr
re
ea
at
te
er
r.
.
I If
f tth
he
e bbr
ra
ak
ke
e ssy
ys
st
te
em
m wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s uup
p tto
og
ge
et
th
he
er
r wwi
it
th
h tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g
l la
am
mp
p,
, tth
he
e rre
ea
ar
r wwh
he
ee
el
ls
s cco
ou
ul
ld
d llo
oc
ck
k ppr
re
em
ma
at
tu
ur
re
el
ly
y uup
po
on
n bbr
ra
ak
ki
in
ng
g.
. PPr
ro
oc
ce
ee
ed
d
i im
mm
me
ed
di
ia
at
te
el
ly
y tto
o aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e CCe
en
nt
tr
re
e wwh
hi
il
le
e eex
xe
er
rc
ci
is
si
in
ng
g eex
xt
tr
re
em
me
e
c ca
au
ut
ti
io
on
n.
.
K
W WA
AR
RN
NI
IN
NG
G


52Instrument panel
It will also come on if a fault should occur in the ABS because the
TCS operates in conjunction with the ABS. For more information
⇒“Brakes”.K
Electronic stabilisation program (ESP)*
This program includes the ABS, EDL and TCS.
The warning light provides information on the electronic
stabilisation programme and has the following functions:
• It lights up when the ignition is switched on and should go out
again after a few seconds.
• It flashes when the ESP is activated when driving.
• It will light up continuously if there is a malfunction in the ESP.
• It will light up continuously if the ESP is switched off.
• It will also come on if a fault should occur in the ABS because the
ESP operates in conjunction with the ABS.
If the ESP warning lamp lights up and stays on immediately after
the engine is started, this may mean that the control system has
temporarily switched off the ESP. In this case the ESP can be
reactivated by switching the ignition off and then on again. If the
warning lamp goes out, this means the system is fully functional.
E El
le
ec
ct
tr
ro
on
ni
ic
c ddi
if
ff
fe
er
re
en
nt
ti
ia
al
l llo
oc
ck
k ((E
ED
DL
L)
) ffa
au
ul
lt
t
EDL operates along with the ABS in vehicles equipped with an Electronic
Stabilisation Program (ESP*).
A malfunction in the EDL is indicated by the ABS warning lamp. Take the
vehicle to the Technical Service as soon as possible. For more information
on the EDL
⇒page 133.K
Electronic immobiliser*
When switching the ignition on, the data from the vehicle key is
automatically processed. This procedure is confirmed by the
warning lamp lighting up briefly.
If a non-authorised key is used, the warning lamp will flash
permanently. The ignition will not work
⇒"Keys with remote
control" chapter.
K
Engine oil pressure/level*
The warning lamp lights up for a few seconds as a functional check
when ignition is switched on.
If the warning lamp is red or yellow or flashes it indicates that the
engine oil pressure or level is too low. This warning lamp will also
light up if there is a defect in the oil level indicator.
I If
f lli
ig
gh
ht
ts
s uup
p oor
r ffl
la
as
sh
he
es
s rre
ed
d ((i
in
ns
su
uf
ff
fi
ic
ci
ie
en
nt
t ooi
il
l ppr
re
es
ss
su
ur
re
e)
)
If the warning lamp lights up or flashes red while driving an acousticsignal
will sound three times at engine speeds above 1500 rpm. Stop and switch
engine off: check oil level and add oil, if necessary
⇒"Engine oil" chapter.
I If
f tth
he
e wwa
ar
rn
ni
in
ng
g lla
am
mp
p ffl
la
as
sh
he
es
s eev
ve
en
n tth
ho
ou
ug
gh
h tth
he
e ooi
il
l lle
ev
ve
el
l iis
s iin
n oor
rd
de
er
r,
, ddo
o nno
ot
t
c co
on
nt
ti
in
nu
ue
e ddr
ri
iv
vi
in
ng
g.
. DDo
o nno
ot
t eev
ve
en
n rru
un
n tth
he
e een
ng
gi
in
ne
e aat
t iid
dl
li
in
ng
g ssp
pe
ee
ed
d.
. CCa
al
ll
l iin
n eex
xp
pe
er
rt
t
a as
ss
si
is
st
ta
an
nc
ce
e.
.
If while driving the engine speed decreases below idling speed the oil
pressure warning lamp may light up. Increase engine speed by accelerating
or changing down gear.


57 Opening and closing
Safety FirstControls and equipment Tips and Maintenance Technical Data
Keys with remote control*The vehicles with remote control* are supplied with two keys. A
conventional key
⇒page 56 and a key with remote control⇒
"Radio-frequency remote control key" chapter.
N No
ot
te
e
In some model versions and in some countries the key with a remote control
function can be folded. Its functioning, as far as the remote control, is
identical to the keys with remote control
⇒"Radio-frequency remote control
key" chapter.
F Fo
ol
ld
da
ab
bl
le
e kke
ey
y*
*
T
To
o uun
nf
fo
ol
ld
d
the key sword, press button A. It will unfold with a spring.
T To
o ffo
ol
ld
d
the key sword, press button
Aand guide it with your hand until it is
completely folded.K
Electronic immobiliser
The immobiliser prevents unauthorised persons from using your
vehicle.
A micro-chip is located in the head of the key which automatically
deactivates the immobiliser when the key is inserted in the ignition
lock.
The system is automatically activated when the ignition is switched
off.
N No
ot
te
e
The engine can thus only be started with a correctly coded Genuine SEAT
key.
Trouble free operation of your vehicle can only be guaranteed when using
genuine keys.
K
Fig. 44
Fig. 45
LEO-005
A
LEO-006