2005 Seat Cordoba key

66Opening and closing
The following functions can be operated using the radio wave
remote control without using the key manually.
– Locking and unlocking the central locking system.
– Turning the anti theft alarm* and the locking security system
(double lock) on and off.
– Switching on the inside light
⇒ "Interior lights" chapter.
The radio wave transmitter with its battery is located in the handle
of the key. The radio wave receiver is located inside the vehicle.
The e ef
ff
fe
ec
ct
ti
iv
ve
e rra
an
ng
ge
e
(red area) of the remote control is shown in the
illustration. The maximum range depends on various conditions.
The range will reduce as the batteries lose power.
N No
ot
te
e
The remote control becomes inoperative when the key is in the ignition lock
or when the ignition is on.
O Op
pe
en
ni
in
ng
g aan
nd
d ccl
lo
os
si
in
ng
g tth
he
e vve
eh
hi
ic
cl
le
e
To u un
nl
lo
oc
ck
k
the vehicle, point the key from within the effective range
at the vehicle and briefly press the “open” button (arrow
1). The
indicators will flicker. To l lo
oc
ck
k
the vehicle, briefly press the ”close”
button (arrow
2). The indicators flicker once.
By pressing the locking button (arrow
2) t tw
wi
ic
ce
eboth the locking
security mechanism (double) and the volumetric alarm are
deactivated but the perimetric alarm remains active and this is
indicated by the indicator light on the driver’s door.
S Se
el
le
ec
ct
ti
iv
ve
e oop
pe
en
ni
in
ng
g*
*
To open only the driver's door (all other doors will remain locked),
press the "open" button (arrow
1) once.
To unlock all doors, press the "open" button (arrow
1) twice.
N No
ot
te
e
While pressing the "open" or "close" buttons, a LED will flash on the key. If
this LED does not appear, it may mean that the key’s battery is depleted. In
this case, have the battery tested or changed at a Technical Service Centre.
When the dead-lock mechanism and the anti-theft alarm* are activated,
proceed as follows:
If the vehicle is unlocked by using the open button on the radio-frequency
remote control*, all of the doors and the boot
1)will be relocked
automatically if they are not opened within 30 seconds. However, the
locking security system and the anti theft alarm will remain deactivated
during these 30 seconds. This function prevents the vehicle being
accidentally left open following the unintentional use of the remote control
within range of the vehicle.
K
21
LEO-009Fig. 51
1)The alarm and dead-lock mechanism will remain in the same position as before
opening.

67 Opening and closing
Safety FirstControls and equipment Tips and Maintenance Technical Data
Synchronization
If the vehicle fails to open when the radio transmitter button is
pressed, it could be that the key code does not match the vehicle
control unit code. This can happen when the transmitter button is
frequently pressed outside the effective range of the system. I It
t iis
s
r re
ec
co
om
mm
me
en
nd
de
ed
d tth
ha
at
t tth
hi
is
s oop
pe
er
ra
at
ti
io
on
n bbe
e ddo
on
ne
e bby
y aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e
C Ce
en
nt
tr
re
e.
.
To synchronize the key again the following procedure must be
followed:
– B Bo
ot
th
h
vehicle keys, the key with the r ra
ad
di
io
o ttr
ra
an
ns
sm
mi
it
tt
te
er
r
Aand the
conventional keyB, must be used.
– The synchronization process must be completed within 3 30
0
s se
ec
co
on
nd
ds
s
.
– Use key
Bto switch on ignition and keyAto program.
– Make sure that the vehicle iso op
pe
en
n
before you proceed to the
programming.
– Place key
Bin the ignition and switch on.
– Use key
Ato lock the driver’s door manually.– Now u un
nl
lo
oc
ck
k
and l lo
oc
ck
k
manually the driver’s door with key
Awhile
pressing button 1o op
pe
en
n⇒fig. 51.
– Take the key out of the ignition.
Uncoded keys can be obtained at SEAT Official Service Centers. These keys,
however, must be synchronized by a SEAT Official Service Center asthe code
for the immobiliser also has to be programmed in the head of the key.
K
Authorization for use
The radio wave remote control fulfills all norms. Its use has been
approved by the corresponding German office (Federal Approvals
Office For Telecommunications ofThe Federal Republicof
Germany).
All components have been marked according to current
stipulations.
This authorization is the basis for approval in other countries.
K

68Opening and closing
E
El
le
ec
ct
tr
ri
ic
c wwi
in
nd
do
ow
ws
s*
*
Opening or closing the windows electrically
1Driver door
2Front passenger door
3Security remote control*
4Right rear door*
5Left rear door*
Each window riser switch is found in the driver door armrest, as
well as the front passenger and rear door handle plates*.
The electric window risers may be activated with the ignition on.With the ignition off, the window risers may be activate for some
10 minutes. When a front door is opened, they shall cease to
function.
With the security
3switch the rear window riser keys may be
blocked. Upon pressing anew the rear door keys they become
operational again.
In the front passenger door and the rear doors* there are other
corresponding additional controls corresponding to their
respective windows.
These controls only have open and closing function of their
respective window.
With the security
3control of the driver side door the rear window
risers may be deactivated.
– Security controln no
ot
t ppr
re
es
ss
se
ed
d:
:
The rear window riser controls function
– Security controlp pr
re
es
ss
se
ed
d:
:
The rear window riser controls are out of service.
Electricwindows with an automaticclosing function* are equipped
with a p po
ow
we
er
r lli
im
mi
it
te
er
r.
.
The windows will automatically stop closing if any obstacle is
encountered. T Th
hi
is
s aan
nt
ti
i-
-i
im
mp
pr
ri
is
so
on
nm
me
en
nt
t ffu
un
nc
ct
ti
io
on
n wwi
il
ll
l nno
ot
t bbe
e aac
ct
ti
iv
va
at
te
ed
d,
,
h ho
ow
we
ev
ve
er
r,
, wwh
he
en
n tth
he
e wwi
in
nd
do
ow
ws
s aar
re
e ccl
lo
os
se
ed
d ffr
ro
om
m tth
he
e ddr
ri
iv
ve
er
r'
's
s ssi
id
de
e llo
oc
ck
k
w wi
it
th
h tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y.
.
1
52
4
3
IBN-006Fig. 52
•A Al
lw
wa
ay
ys
s rre
em
mo
ov
ve
e tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y wwh
he
en
n lle
ea
av
vi
in
ng
g tth
he
e vve
eh
hi
ic
cl
le
e –– eev
ve
en
n iif
f oon
nl
ly
y ffo
or
r
a a ssh
ho
or
rt
t tti
im
me
e.
. NNe
ev
ve
er
r lle
ea
av
ve
e cch
hi
il
ld
dr
re
en
n aal
lo
on
ne
e iin
n tth
he
e vve
eh
hi
ic
cl
le
e.
.
W
WA
AR
RN
NI
IN
NG
G


70Opening and closing
C
Cl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s wwi
it
th
ho
ou
ut
t aau
ut
to
om
ma
at
ti
ic
c ccl
lo
os
si
in
ng
g ffu
un
nc
ct
ti
io
on
n*
*
Lift the switch by the front edge until the window is completely
closed.
P Pl
le
ea
as
se
e nno
ot
te
e tth
ha
at
t tth
he
e wwi
in
nd
do
ow
w ccl
lo
os
se
es
s wwi
it
th
ho
ou
ut
t ppo
ow
we
er
r lli
im
mi
it
ta
at
ti
io
on
n.
.
Function of the electric windows with ignition switched off
After the ignition has been switched off, the windows can still be
operated for about ten minutes as long as the driver or passenger
doors are not opened.
The windows on vehicles with central locking can also be closed or
opened from the outside (in cars with a sliding/electric roof you
can only close them). For this purpose, the key must be in the lock
of the driver’s door and held in the locking or open position.
O Op
pe
en
ni
in
ng
g
Press the front edge of the respective button.C Cl
lo
os
si
in
ng
g
Lift the front edge of the respective button.
N No
ot
te
e
If the window in the driver or passenger door is hindered whilst closing
through stiffness or by an obstacle (roll-back function), the window will
open again immediately.
In this case you can only close the window again after the ignition has been
switched on.
K
Notes
The automaticopening/closing function*on the driver and
passenger door windows will not function after the vehicle battery
has been disconnected/reconnected.
To reinstall this function after reconnecting the battery, please note
the following points.
•L Lo
oc
ck
k vve
eh
hi
ic
cl
le
e
from the outside via the driver’s door. When doing
this please ensure that all doors and windows are closed
completely.
•L Lo
oc
ck
k tth
he
e vve
eh
hi
ic
cl
le
e aag
ga
ai
in
n
via the driver’s door. H Ho
ol
ld
d tth
he
e kke
ey
y iin
n tth
he
e
l lo
oc
ck
ki
in
ng
g ppo
os
si
it
ti
io
on
n ffo
or
r aat
t lle
ea
as
st
t oon
ne
e sse
ec
co
on
nd
d.
.
The automaticclosing function* on the driver’s and passenger side
has been reactivated.
•T Ta
ak
ke
e ggr
re
ea
at
t cca
ar
re
e wwh
he
en
n ccl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s!
! CCl
lo
os
si
in
ng
g tth
he
e wwi
in
nd
do
ow
ws
s iin
n aa
c ca
ar
re
el
le
es
ss
s oor
r uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d mma
an
nn
ne
er
r mma
ay
y cca
au
us
se
e bbr
ru
ui
is
se
es
s,
, ees
sp
pe
ec
ci
ia
al
ll
ly
y iin
n cch
hi
il
ld
dr
re
en
n.
.
•T
Th
he
e ddr
ri
iv
ve
er
r mmu
us
st
t wwa
ar
rn
n tth
he
e oot
th
he
er
r ooc
cc
cu
up
pa
an
nt
ts
s oof
f tth
he
e rri
is
sk
k wwh
hi
ic
ch
h cca
ar
re
el
le
es
ss
s
o op
pe
er
ra
at
ti
io
on
n oof
f eel
le
ec
ct
tr
ri
ic
c wwi
in
nd
do
ow
ws
s een
nt
ta
ai
il
ls
s.
.
K
W WA
AR
RN
NI
IN
NG
G


72Opening and closing
T
To
o ccl
lo
os
se
e A
To close it turn the control to position A.
The opening sunroof has an a an
nt
ti
i-
-i
im
mp
pr
ri
is
so
on
nm
me
en
nt
t ffu
un
nc
ct
ti
io
on
n
. If upon
closing the roof, closes with difficulty or encounters an obstacle, it
will open immediately.
To close the roof press the rotary control in the front part, staying in
position
A, until the roof closes completely.
T Th
he
e rro
oo
of
f ccl
lo
os
se
es
s wwi
it
th
ho
ou
ut
t tth
he
e aan
nt
ti
i-
-i
im
mp
pr
ri
is
so
on
nm
me
en
nt
t ffu
un
nc
ct
ti
io
on
n.
.
N No
ot
te
e
After disconnecting and re-connecting the vehicle battery the roof may not
close completely. For this, keep pressing the front part of the rotary control
for some 10 seconds.
T To
o oop
pe
en
n B
Turn the control clockwise until the desired position. With the
control in position Cthe roof opens until the c co
om
mf
fo
or
rt
t ppo
os
si
it
ti
io
on
n.
.
To open the roof fully keep turning the control until position
B
without releasing it. In this position however, noise due to the wind
may be produced.
N No
ot
te
e
The parasol opens automatically to protect from excess sunlight when the
crystal roof is raised. If desired, it may be closed manually when the roof is
closed.
T To
o rra
ai
is
se
eD
Turn control clockwise until the desired position. With the control in
position Dthe roof is raised completely.
The roof closesw wi
it
th
ho
ou
ut
t
the a an
nt
ti
i-
-i
im
mp
pr
ri
is
so
on
nm
me
en
nt
t ffu
un
nc
ct
ti
io
on
n.
.
K
Comfort locking*
The opening sunroof may not only be closed with the control, but
also with the centralized* locking, if the vehicle is equipped with it,
when it is locked from the driver or front passenger side door:
Maintain the key in the locking position until the roof fully closes.
K
Emergency activation
B6X-100DFig. 54

74Lights and visibility
L
Li
ig
gh
ht
ts
s aan
nd
d vvi
is
si
ib
bi
il
li
it
ty
y
S
Sw
wi
it
tc
ch
he
es
s
Switching lights on and off
L
Li
ig
gh
ht
ti
in
ng
g ssw
wi
it
tc
ch
h 1
– Switched off1)
– Side lights
– Dipped or main beamThe headlights only work when the ignition is on. When switching
ignition on and after ignition is switched off the side lights are
automatically switched on.
Dipping and flashing the headlights
⇒"Flashers and high beam
lever" chapter.
N No
ot
te
e
If lights are not switched off and the ignition key is removed, a buzzer* will
sound when the driver’s door is open.
F Fr
ro
on
nt
t ffo
og
g lli
ig
gh
ht
ts
s*
*
Place the light switch in the side lights or dipped/main beam
position and pull to first stop.
R Re
ea
ar
r ffo
og
g lli
ig
gh
ht
t*
*
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
ho
ou
ut
t ffo
og
g lli
ig
gh
ht
ts
s
Turn lighting switch to dipped/main beam position and pull switch
out to top.
• • VVe
eh
hi
ic
cl
le
es
s wwi
it
th
h ffo
og
g lli
ig
gh
ht
ts
s
With lighting switch in dipped/main beam position, pull switch out
to 2nd detent.
N No
ot
te
e
•A warning lamp in the instrument panel lights up when the rear fog light
is switched on.
•Due to the amount of dazzle it causes, the rear fog light should only be
switched on when the visibility is very poor (e.g. in some E.U. countries,
below 50 metres).
0
o
123
IBN-007Fig. 56
1)Vehicles for some countries: when the ignition is switched on, the dipped beam is
also switched on.


75 Lights and visibility
Safety FirstControls and equipment Tips and Maintenance Technical Data
The electrical system of the factory fitted tow bar* is wired up so that when
towing a trailer fitted with rear fog lights, the rear fog lights on the towing
vehicle are automatically switched off.
K
Instrument and switch lighting /
Headlight range control
I In
ns
st
tr
ru
um
me
en
nt
t lli
ig
gh
ht
ti
in
ng
g 2
When the lights are on, the level of the instrument lighting can be
set to any intensity by turning the knurled wheel next to the light
switch.
H He
ea
ad
dl
li
ig
gh
ht
t rra
an
ng
ge
e cco
on
nt
tr
ro
ol
l*
*
3
With the electrical range control the headlight settings can be
matched exactly to the load condition of vehicle. This prevents
oncoming traffic from being dazzled more than is unavoidable. Atthe same time the correct headlight beam setting provides the
best possible visibility for the driver.
The headlights can only be regulated with the dipped headlights
switched on.
To lower the beams, turn knurled discfrom the basicposition (0)
downwards.
K
Heated rear window 4
Only works if the engine is running. A lamp in the switch lights up
when connected.
The heating device of the rear window disconnects automatically
after 20 minutes. If the key is pressed again after 20 minutes have
passed, the heated rear windscreen will remain on until the
ignition is switched off.
o
123
IBN-007Fig. 57
Fig. 58
VOLT12
16
CON-012


78Lights and visibility
• Left turn signals – lever down2
When turn signals are working, the warning lamp flashes as well⇒
"Warning lamps" chapter.
The turn signals switch off automatically when the steering wheel
returns to its normal position.
T To
o ssi
ig
gn
na
al
l aa lla
an
ne
e cch
ha
an
ng
ge
e
For rapid manoeuvres such as lane changes, lift
1or press down2the lever only to the point of pressure and hold it in position.
If the lever is used with a slight pulsation the indicator will blink
three times.
H He
ea
ad
dl
li
ig
gh
ht
t ffl
la
as
sh
he
er
r
Pull the lever towards the steering wheel
3– the main beam
warning lamp will light up.
H Hi
ig
gh
h bbe
ea
am
m lli
ig
gh
ht
t
To engage the high beam lights, push the lever forward with the
low beam lights connected
4. The corresponding warning lamp
will light up when the high beam light is on.
P Pa
ar
rk
ki
in
ng
g lli
ig
gh
ht
ts
s*
*
The parking lights only work when ignition is switched off.
Right parking lights – lever up
1
Left parking lights – lever down2
If the ignition key has been removed, a buzzer* will sound when
the driver’s door is open.N No
ot
te
e
The use of the signals and lighting described here is subject to local
regulations.K
I In
nt
te
er
ri
io
or
r lli
ig
gh
ht
ts
s
Front interior light
Switch positionsA:
0–Off
Right – Door contact switch
Left – Light on continuously
B45-144CFig. 62