2005 Peugeot 307 SW Dag Owner's Manual

Audio equipment and telematics60 -
28-02-2005
61Audio equipment and telematics-
28-02-2005
RDS
Using the RDS (Radio Data
System) function on FM
The RDS allows you to continue lis-
tening to the same station whatever
frequency it is using in the region
you are going through. The display
indicates the name of the station
selected.
However, poor coverage of the net-
work or particular environmental
conditions may interfere with the
transmission.
The audio/telephone is continually
searching for the transmitter which
is transmitting the same programme
with the best reception.In the permanent au-
dio application, press
the navigator briely to
display the "RADIO"
contextual menu.
Activate or deactivate the RDS fre-
quency following.
The multifunction display will show:
- RDS if the function is active,
- RDS crossed out or greyed out if the function is active but not available. Regional following mode (REG)
When they are part of a network,
certain stations broadcast regional
programmes in the various areas
they serve. Regional following mode
enables you to continue listening to
the same programme.
In the permanent au-
dio application, press
the navigator briely to
display the "RADIO"
contextual menu.
Activate or deactivate regional fol-
lowing mode.
The multifunction display will show:
- REG if the function is active,
- REG crossed out or greyed out if the function is active but not avail-
able.

Audio equipment and telematics60 -
28-02-2005
61Audio equipment and telematics-
28-02-2005
Compact disc
Selecting CD mode
Ejecting a discSelecting a track
Press button
8 to select the follow-
ing track.
Press button 7 to return to the start
of the current track or to select the
previous track.
You can also select a track directly
via the list of tracks on the CD:
- press the "LIST" button to display the list,
- press button 5 or 6 or turn the dial
to select the track,
- press the navigator to start playing the track.
Accelerated play
Press and hold button 7 or 8 for
backwards or forwards accelerated
play.
Accelerated play stops as soon as
the button is released.
After inserting a disc,
printed face upwards,
the CD player starts
automatically.
If a disc has already
been inserted, press
the "SOURCE" button to select CD
mode.
Note: during guidance, the naviga-
tion CD ROM must remain in the
RT3 GPS audio/telephone player; if
you wish to listen to an audio CD,
you must use the CD changer.
Press the button to
eject the disc from the
player. "CD" menu
By pressing the navigator, in the CD
permanent application, you gain ac-
cess to the following functions:
- random play with "Activate Ran-
dom",
- playing of the start of the track with "Activate Introscan",
- programming of tracks with "Pro- gramme tracks",
- display of the tracks with "List of tracks".
Insert circular compact
discs only.
Some anti-pirating sys-
tems, on original discs or
CDs copied by a personal
CD writer may cause faults, irre-
spective of the quality of the original
player.

Audio equipment and telematics62 -
28-02-2005
63Audio equipment and telematics-
28-02-2005
Compact disc changer
Selecting the CD changer Press the "SOURCE"
button several times.
Selecting a disc
Press one of the buttons "1" to "5"
on the changer to select the corre-
sponding disc.
Buttons 5 and 6 permit the selec-
tion of the previous/next disc in the
changer. Selecting a track
Press button
8 to select the next
track.
Press button 7 to return to the start
of the current track or to select the
previous track.
You can also select a track directly
via the list of tracks on the CD:
- press the "LIST" button to display the list,
- press the 5 or 6 down button or
turn the dial to select the track,
- press the navigator to start playing the track.
Accelerated play
Press and hold one of the buttons 7
or 8 for forwards or backwards ac-
celerated play respectively.
The accelerated play stops when the
button is released. "CHANGER" menu
Press the navigator, in the changer
permanent application, to gain ac-
cess to the following functions:
- random play with "Activate Ran-
dom",
- playing of the start of the track with "Activate Introscan",
- repeating of the CD with "Activate repeat",
- displaying of the tracks of the CD with "List of tracks".
These functions are only applied to
the tracks of the CD currently being
played.
Insert circular compact discs
only.
Some anti-pirating systems,
on original discs or CDs
copied by a personal CD
writer may cause faults, irrespective
of the quality of the original player.

Audio equipment and telematics62 -
28-02-2005
63Audio equipment and telematics-
28-02-2005
RT3 TELEPHONE
This function is a GSM dual-band
telephone (900 and 1 800 MHz)
incorporated in the RT3 GPS audio/
telephone.
It is a "hands-free" telephone. This
function is provided by a microphone
located next to the front courtesy
light, the audio equipment speak-
ers, a steering column control and
voice commands which allow access
to most of the functions (the audio/
telephone control panel buttons al-
low access to all of the functions).
Display of the principal "mobile" type
functions, as well as consultation of
the directories, is provided by the
multi-function display.
This function is active whatever posi-
tion the ignition key is in, even after
thirty minutes, when the switch to
economy mode message appears
on the multi-function display.
When the ignition has been switched
off, the audio/telephone can be
switched on again by pressing the
"TEL" (green) button or by inserting
a CD in the player.
For safety reasons, the
driver must carry out the
operations while the vehi-
cle is stationary.
Using the menus
Press the "MENU"
button to display the
general menu. Select
the "Telematics" appli-
cation, then validate
"Telephone functions"
to access the principal telephone
functions, then the various menus, in
order to reach the one required.
This menu allows you to access the
following functions:
- Network: allows you to select the network search mode and to see
the networks available.
- Duration of calls: allows you to con- sult the duration recorder of calls
made and zero re-set.
- Security: allows you to use or modi- fy the PIN code and to erase the list
of calls and text messages (SMS).
- Telephone options: allows you to conigure the calls with entering of
my number, automatic answering
after X rings, speciication of ring
options and allows you to conigure
the call diversion number.

Audio equipment and telematics64 -
28-02-2005
65Audio equipment and telematics-
28-02-2005
Within each menu:
Move around by pressing the 5 or 6
buttons or by turning the navigator,
then validate by pressing the naviga-
tor to select a function.
Cancel an operation by means of the
"ESC" button.Using the alphanumeric
keypad
For a given button, to input a charac-
ter in the second or subsequent rows
press until you obtain the character
required.
Installing the SIM card
(not supplied)
Open the lap by
pressing the point of
a pencil on the circu-
lar opening above the
lap.
Insert your SIM card
(available from a mobile telephone
operator) in the holder as indicated
in the graphics, then re-insert the
holder.
Note: removal or insertion of the SIM
card must only be carried out after
the RT3 GPS audio/telephone has
been switched off.
Handle the SIM card with care.
Buttons Associated characters
[1]1 or space
[2]2 or A B C 2 or a b c 2
[3]3 or D E F 3 or d e f 3
[4]4 or G H I 4 or g h i 4
[5]5 or J K L 5 or j k l 5
[6]6 or M N O 6 or m n o 6
[7]7 or P Q R S 7 or p q r s 7
[8]8 or T U V 8 or t u v 8
[9]9 or W X Y Z 9 or w x y z 9
[0]0 or + (long press)
[#]# or conirmation
[*]* or erasing of last char-
acter input (long press)

Audio equipment and telematics64 -
28-02-2005
65Audio equipment and telematics-
28-02-2005
Inputting the PIN code
The PIN code is required each time
the ignition is switched on, unless the
PIN code has been stored or protec-
tion by PIN is not activated on the
SIM card.
Input your PIN code using the al-
phanumeric keypad and validate by
pressing the navigator or button #
to access the network. Connection
to the network is validated by the
appearance of a symbol on the multi-
function screen.
If you make three errors in succes-
sion when inputting your PIN code,
your SIM card will be blocked. To
unblock it, you will need to input the
PUK code. The PUK code will be
supplied to you by the person sell-
ing your SIM card (input of the PUK
code allows for 10 errors in succes-
sion; after this the SIM card becomes
permanently unusable).Cancelling of PIN code request
In the menu "Telephone functions"

select "Security", then "Process the
PIN code", then validate the "Cancel"
function.
Recommendation: do not lose your
SIM card. Losing it would mean
anyone who inds it would be able to
make unlimited calls.
Telephone function screens
Not in use
The screen indicates the presence
of voice messages or text messages
(SMS) not listened to, the cumulatve
time in use since the last zero reset
and the status of your telephone. In use
The screen indicates the time
elapsed since the start of the con-
versation, as well as the number* or
name of the person to whom you are
speaking (if recorded in the directory)
and the status of your telephone.
* If this option and service are avail-
able.

Audio equipment and telematics66 -
28-02-2005
67Audio equipment and telematics-
28-02-2005
Making a call
Press the button to
display the contextual
menu of the telephone.
Pressing the end of
the steering column
control for more than
2 seconds calls up a contextual
menu limited to the "Directory", "List
of calls" and "Voice mail" functions.
Entering a number
Select the function "Enter number"
then enter the number of the person
you wish to speak to using the alpha-
numeric keypad.
Press the "Pick up" button to make
the call.
Making a call from a directory
Select the "Directory" function to
access all the iles containing a
telephone number or the "List of
calls" function to access the list of the
last twenty incoming (if the number
display option is active) or outgoing
calls.
There are two directories, the RT3
GPS audio/telephone directory and
the SIM card directory. To consult the
SIM directory, insert your SIM card
and enter your PIN code. Receiving a call
When a ringing
sounds to let you know
that a call is waiting,
you can choose either
to accept it by press-
ing the "Pick up" but-
ton or the end of the steering wheel
control or not to accept it by pressing
the "Hang up" button or by selecting
and validating the "NO" button on the
"Answer?" screen.
If you accept the call,
to end your commu-
nication, press the
"Hang up" button.
If you do not accept the call, it is
transferred to your voice mail or to a
call diversion number.
You can activate or deactivate this
transfer by pressing the "Hang up"
button for more than two seconds.
Text messages (SMS)
Accessing text messages
When the buzzer sounds (if the SMS
text messages buzzer option is ac-
tive) and a superimposed screen
announces "Do you wish to read the
new text message (SMS)?", you can
choose to read the text message
received by selecting and validating
"YES" or postpone reading it by se-
lecting and validating "NO", by press-
ing the "ESC" button or by waiting
until the announcement disappears.
Note: the old text messages stored
and the new text messages, the read-
ing of which you wish to postpone,
can be consulted. Press the "MENU"
button then validate the "Telematic"
icon, select "Text messages (SMS)"
and validate the function "Reading of
text messages received" by pressing
the navigator. Then scroll through the
list by turning the knob and press the
knob to select the text message to
be read (if the voice synthesiser is
active).

Audio equipment and telematics66 -
28-02-2005
67Audio equipment and telematics-
28-02-2005
Sending a text message
Before typing your irst text mes-
sage, check that your text messages
(SMS) centre number is stored cor-
rectly in the sub-menu "Server cen-
tre N°". If it is not, any text messages
typed before this number is entered
will not be sent.
In the menu "Text messages (SMS)"
validate the function "Typing of a text
message". Type your text message
using the alphanumeric keypad and
validate it using the "OK" button to
store it or validate the "Send" button
to send it. Validation of the "Send"
button enables you to enter the
number of your recipient or select it
from the directory or from the list of
calls and send the message."Duration of calls" menu
Select the "Duration of calls" function
from the "Telephone functions" menu
to consult the duration counters for
the calls made. The part counter to-
tals the duration of the calls since the
last zero reset carried out using the
"Zero reset" button.
"Telephone options" menu
Select the "Telephone options" func-
tion from the "Telephone functions"
menu to access the functions:
• "Conigure the calls" which permits activation and deactivation of the
"show my number" and "automatic
answering after X rings" functions,
• "Ringing options" which permits adjustment of the ringing volume
for voice calls, activation of the text
messages (SMS) receipt buzzer
and selection of a ring tone from
the ive offered,
• "Diversion number/voice mail" which permits recording of the call
diversion number chosen by the
customer, otherwise the call will be
transferred to the voice mail.
Services*
Press the button to
display the "Services"
menu and select one
of the following serv-
ices:
• "Customer Contact Centre" con-
tacts the PEUGEOT Customer
Contact Centre directly and permits
access to the services offered (this
call is suspended if an emergency
or assistance call has been made).
• "PEUGEOT Assistance" enables
you to contact the call centre which
controls the PEUGEOT assistance
service directly, make an assist-
ance request and receive rapid
assistance (you have 6 seconds
within which to cancel the call
when it is made) . During the as-
sistance call phase it is not pos-
sible to make any other calls with
the exception of emergency calls.
Signing the speciic PEUGEOT
contract means that you will be
located; in this case, a star will ap-
pear in the text on the multifunction
screen.
• "Operator services" gives access to
the list of services speciic to your
operator (e.g.: customer service,
consumption monitoring, news,
stock market, weather, travel,
games, etc) if access is available.
* If option and service available.