WW-12
FRONT WIPER AND WASHER SYSTEM
Removal and Installation of Front Washer Nozzle EKS0032U
REMOVAL
Push front washer nozzle pawl toward engine hood to pull out.
INSTALLATION
1. After connecting washer hose, press nozzle from cowl top cover surface.
2. Assemble nozzle and socket.
3. Adjust nozzle injection position.
Inspection for Front Washer Nozzle EKS0032V
CHECK VALVE
Blow air in the injection direction, and check that air flows only one
way. Make sure that the reverse direction (inhale) is not possible.
Removal and Installation of Wiper and Washer Switch EKS0032W
REMOVAL
1. Remove steering column cover. Refer to IP-10, "INSTRUMENT
PANEL ASSEMBLY" in “INSTRUMENT PANEL (IP)” section.
2. Remove wiper and washer switch connector.
3. Remove two screws then remove wiper and washer switch from
the spiral cable.
INSTALLATION
Installation is the reverse order of removal.
PKIA9740E
PKIA9741E
SKIA0018E
REAR WIPER AND WASHER SYSTEM
WW-19
C
D
E
F
G
H
I
J
L
MA
B
WW
Removal and Installation of Wiper and Washer Switch EKS00336
Refer to WW-12, "Removal and Installation of Wiper and Washer Switch" .
Removal and Installation of Washer Tank EKS00337
Refer to WW-13, "Removal and Installation of Washer Tank" .
Removal and Installation of Washer Motor EKS00338
Refer to WW-13, "Removal and Installation of Washer Motor" .
Washer Tube LayoutEKS00339
PKIA0540E
