2005 MERCEDES-BENZ CL-Class Comand Manual

39 Audio
Radio operation
FM, AM band
Entries outside the frequency range are
not possible.Automatic station scan (FM, AM)
The stations in a given waveband (FM, AM)
can be scanned one after the other for 8
seconds each.
The scan function stops automatically
when the first station received has been
scanned twice.Start scan function

Activate the desired wave band
(page 36).

Press the
Scan
soft key.
The scan function will begin.
Scan
will
appear in black lettering.
End scan function and play a station

Press the
Scan
soft key again if you
hear the desired station.
iIf you do not make another entry within
8 seconds, the function will be canceled
and you will listen to the station last tu-
ned to.
iStation scan performs two runs. During
the first run, stations with good
reception are played. During the
second run, stations with weaker
reception are played.

40 AudioRadio operationYou can use the following functions:
Saving stations manually (FM, AM)

Saving stations automatically FM, AM
(page 41)

Selecting a station from the FM/AM
Preset menu (
page 42)

Selecting a station from the FM/AM
Auto presets (
page 43)Saving stations manually (FM, AM)
In the Radio main menu

Activate the desired waveband
(page 36).

Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status line, e.g. “FM2”.On the memory list

Activate the desired waveband
(page 36).

Press the
Presets
soft key.
The memory Preset menu will appear.

Use H, h or g, G to highlight
the desired memory preset.

Press E
longer than 2 seconds.
The current station will be saved at the
memory preset selected.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
Memory functions
iThere are 10 presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.

41 Audio
Radio operation
You will see the Radio main menu
automatically after 8 seconds

if you press the
Back
soft key.Saving stations automatically (FM, AM)

Activate the desired waveband
(page 36).

Press the
Autost.
soft key
.
The autostore presets will appear.

Press E and confirm
Reprogram
Autostore
.
The autostore function is active. The
radio stores the 10 stations with the
strongest signal. The station
frequencies available will appear in the
memory list.
iThere are 2 presets for each of the FM
and AM waveband, standard FM/AM
presets (saving stations manually) and
Auto presets (saving stations automati-
cally).
The standard FM/AM presets are not
affected by the Auto presets. This is a
second option for storing a station ran-
ge you are currently receiving.
iThere are 10 presets available (1 -
9, 0).
The autostore function assigns the sta-
tions to the memory locations in the or-
der of their reception quality.

42 AudioRadio operationSelecting a station from the preset
menu (FM, AM)
Activate the FM or AM memory
(page 40).
You can use one of the following two ways
to select a station from the FM/AM
presets

Press the corresponding number key,
e.g. 3, to select the desired station.
or

Use H, h or g, G to highlight a
memory preset in the FM/AM preset
list.

Press E.
In both cases, you will see the Radio
main menu
automatically after 8 seconds

if you press the
Back
soft key.
The Radio main menu indicating the
memory preset number appears.

43 Audio
Radio operation
Selecting a station from the FM/AM
autostore presets
Activate the FM or AM autostore pre-
sets (
page 41).

Use H, h or g, G to highlight a
memory position.

Press E.
You will see the Radio main menu
automatically after 8 seconds

if you press the
Back
soft key.

44 AudioCD operation

CD operationGeneral Information on CD operationWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
Warning
G
The CD drive and CD changer* are Class 1
laser products. There is a danger of invisible
laser radiation when you open or damage
the cover.
Do not remove the cover. The CD drive and
the CD changer* do not contain any parts
which can be serviced by the user. For safe-
ty reasons, have any necessary service work
performed by qualified personnel.iOnly use CDs, which bear the label
shown and that conform to the compact
standard (IEC 60908). You can there-
fore only use CDs with a maximum
thickness of 1.3 mm.
iThe COMAND CD drive may not be able
to play audio CDs with copy protection
or copied CDs.!Use only CDs with a diameter of 12 cm,
do not use 8-cm CDs.
An 8-cm CD adapter may cause dama-
ge to the CD changer* or to the
COMAND and should not be used. iYour CD drive has been designed to
play CDs which correspond to the IEC
60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.

45 Audio
CD operation

Only touch the CD on the edge.

Avoid touching the CD surface with
your fingers.

Clean the CD with a dry, lint-free cloth.
Wipe them from the inside to the outer
edge. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean the CDs.

Do not expose the CDs to heat or direct
sunlight.

Do not write or put stickers on CD.Tips on caring for your CDs

46 AudioCD operationPlayback locations for audio CDs are:
the CD drive in the COMAND

the CD changer*.
Differences regarding the CD mode depen-
ding on the audio source are highlighted.

In the Audio menu (
page 34), press
the
CD
soft key (for CD drive) or
the
CD
soft key (for CD changer*).
CD changer* main menu1CD changer*
CD
or CD drive
CD
2Current track/number of tracks on the
current CD
3Elapsed playback time of the current
track
CD drive
CD changer*
Switching to CD operation
iThe
CD-Mag
soft key is only assigned
when the CD changer* is active.
The
Sound
soft key appears if the
COMAND is provided with sound
functions* (page 31).
iThe CD drive in the COMAND can
playback audio CDs, MP3-CDs
(page 55). The slot of the drive is
behind the display.
iThe CD changer* can accomodate up
to 6 audio CDs. It is located on the left-
hand side in the trunk.
Loading CDsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second. iThe COMAND may be unable to
playback audio CDs provided with copy
protection.