Page 729 of 969
51068-01
F41597
TYPE A VANE PUMP:
Pressure Port Union
Flow Control Valve
O-Ring
Flow Control Valve
Compression Spring
Power Steering
Suction Port Union
43 (438, 32)
Pump Bracket
Front
Vane Pump
Housing Front
O-Ring Gasket
O-Ring
24 (245, 18)24 (245, 18)
Vane Pump
Bracket Rear Vane Pump
Housing Rear
44 (449, 32)
Vane Pump Pulley
Vane Pump Shaft
Vane Pump Shaft Snap Ring
Vane Pump Housing Oil Seal
Vane Pump Plate
Vane Pump Rotor
Vane Pump Cam Ring
Vane Pump
Side Plate RearWave Washer
Non-reusable part
NVm (kgfVcm, ftVlbf) : Specified torque
Power steering fluid
X10
83 (846, 61)
13 (133, 10)
43 (438, 32)
- POWER STEERINGVANE PUMP ASSY
51-7
2582 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
VANE PUMP ASSY
COMPONENTS
Page 730 of 969
F41589
TYPE B VANE PUMP:
Pressure Port Union
O-Ring
Flow Control Valve
Flow Control Valve
Compression Spring
Gasket
Power Steering
Suction Port Union
O-Ring
Pump Bracket
Front
Vane Pump
Housing Front
O-Ring
24 (245, 18)
24 (245, 18)
Vane Pump
Housing Rear
Wave Washer
Vane Pump
Side Plate Rear
Vane Pump Cam Ring
Vane Pump Plate
Vane Pump Shaft Snap Ring W/Pulley Shaft
Sub-assy Vane Pump Housing
Oil Seal
Non-reusable part
NVm (kgfVcm, ftVlbf) : Specified torque
Power steering fluid
Vane Pump
Bracket Rear
X10
Vane Pump Rotor
83 (846, 61)
13 (133, 10)
44 (449, 32)
44 (449, 32)
51-8
- POWER STEERINGVANE PUMP ASSY
2583 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
Page 736 of 969
F40340
F40341
Inscribed
Mark
F04644
Round End
Gasket
F41480
Set
R11292
51-14
- POWER STEERINGVANE PUMP ASSY
2589 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
34. INSTALL VANE PUMP ROTOR
(a) Install the vane pump rotor.
(b) Using a snap ring expander, install a new vane pump
shaft snap ring.
35. INSTALL VANE PUMP CAM RING
(a) Align the holes of the vane pump cam ring with 2 straight
pins, and install the vane pump cam ring with inscribed
mark facing outward.
(b) Coat 10 vane pump plates with power steering fluid.
(c) Install the vane pump plates with the round end facing
outward.
(d) Install a new gasket.
36. INSTALL VANE PUMP SIDE PLATE REAR
(a) Coat a new O-ring with power steering fluid and install it
to the vane pump side plate rear.
(b) Align the groove of the vane pump cam ring with that of
the vane pump side plate rear, install the vane pump side
plate rear.
(c) Install the wave washer so that its protrusions fit into the
slots in the vane pump side plate rear.
Page 742 of 969
F41890
Steering Rack
Boot No.1 ClampSteering Rack
Boot No.1
Lock Nut
Steering Rack Boot
Clip
Rack Housing
Claw Washer
Steering Rack End Sub-assy
Power Steering Cylinder
Tube Oil Seal
Power Steering Rack
O-Ring Rack Steering
Piston Ring
O-Ring
Power Steering Rack Bush Cylinder End Stopper
Wire
Claw Washer
Steering Rack End Sub-assy
Steering Rack Boot No.2 Clamp Steering Rack
Boot No.2
Steering Rack Boot ClipLock Nut
Tie Rod Assy RH
RACK & PINION GEAR POWER STEERING GEAR ASSY:
* For use with SST Non-reusable part
NVm (kgfVcm, ftVlbf) : Specified torque
Molybdenum disulfide lithium base grease
Power steering fluid
Tie Rod Assy LH
Rack Bush
Oil Seal
74 (755, 55)
83.5 (851, 62)
*58.5 (597, 43)
83.5 (851, 62)
*58.5 (597, 43)
74 (755, 55)
51-20
- POWER STEERINGRACK & PINION POWER STEERING GEAR ASSY
2595 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
Page 839 of 969
Lexus Supports ASE CertificationPage 1 of 2
Title:
WINDSHIELD WIPER BLADE
MAINTENANCE AND CLEANING
Models:
'98 ± '06 All Models
Technical Service
Information Bulletin
July 13, 2005
BO004-05
The following procedures are recommended to maintain windshield wiper
blade performance.
1998 ± 2006 model year Lexus vehicles.
OP CODEDESCRIPTIONTIMEOFPT1T2
N/ANot Applicable to Warranty±±±±
Recommendations for Windshield Wiper Maintenance, Cleaning, and Use:
1. Scheduled Maintenance
Check wiper rubber blades every 4 ± 6 months or 7,500 miles for wear, cracking,
and contamination.
Clean glass and rubber wiper blades if blades are not clearing glass adequately.
If this does not correct the problem, then replace the rubber elements.
2. Cleaning Procedure
Wiper Rubber: Bugs, dirt, sap, and road grime on blades will cause streaking.
Clean wiper rubber of road and environmental debris using cloth or paper towel
soaked with windshield washer fluid or mild detergent.
DO NOT USE fuel, kerosene, or petroleum based products to clean rubber
wiper blades.
Windshield: Bugs, sap, road grime, and car wash wax treatments decrease
wiper performance.
Rinse windshield with water and apply non±abrasive cleaner, such as Bon±Ami
(www.faultless.com), with a sponge.
NOTE:
Make sure to use plenty of water with all powder based cleaners so the glass is
not scratched.
BODY
Introduction
Applicable
Vehicles
Warranty
Information
Maintenance,
Cleaning
& Use
