2005 LEXUS ES300 Strut

2706H-02
B53735
B53736
27-10
- REAR SUSPENSIONREAR SUSPENSION ARM ASSY NO.1 LH
2392 Author
: Date
:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
REAR SUSPENSION ARM ASSY NO.1 LH
REPLACEMENT
HINT:
COMPONENTS: See page 27-2
1. REMOVE REAR WHEEL
2. REMOVE EXHAUST PIPE ASSY CENTER (See page 15-2)
3. REMOVE STABILIZER BAR REAR (See page 27-16)
4. SEPARATE STRUT ROD ASSY REAR (See page 27-18)
5. SEPARATE HEIGHT CONTROL SENSOR SUB-ASSY REAR RH (See page 65-33)
6. SEPARATE REAR SUSPENSION ARM ASSY NO.2 LH
(a) Remove the bolt, nut and rear suspension arm No. 2 (out-
er side) from the rear carrier.
HINT:
Keep the nut fixed while loosening and removing the bolt.
7. SEPARATE REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Separate the RH side by the procedures with the LH side.
8. SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH
(a) Remove the bolt, nut and rear suspension arm No. 1 (out-
er side) from rear axle carrier.
HINT:
Keep the nut fixed while loosening and removing the bolt.
9. SEPARATE REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Separate the RH side by the procedures with the LH side.

B53742
B53736
B53735
27-12
- REAR SUSPENSIONREAR SUSPENSION ARM ASSY NO.1 LH
2394 Author
: Date
:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
13. INSTALL REAR SUSPENSION MEMBER SUB-ASSY
(a) Support the rear suspension member with a jack.
(b) Install the rear suspension member with the 4 nuts, 2 bolts
and 4 retainers.
Torque:
A, B: 55 NVm (561 kgfVcm, 41 ftVlbf)
C: 38 NVm (387 kgfVcm, 28 ftVlbf)
14. TEMPORARILY TIGHTEN REAR SUSPENSION ARM
ASSY NO.1 LH
(a) Connect the rear suspension arm No. 1 (outer side) to the
rear axle carrier with the bolt and nut, and temporarily
tighten the bolt and nut.
HINT:
Insert the bolt from the front side of the vehicle and temporarily
install the bolt.
15. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
16. TEMPORARILY TIGHTEN REAR SUSPENSION ARM
ASSY NO.2 LH
(a) Connect the rear suspension arm No. 2 (outer side) to the
rear axle carrier with the bolt and nut, and temporarily
tighten the bolt.
HINT:
Insert the bolt from the rear side of the vehicle and temporarily
install the bolt.
17. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
18. CONNECT HEIGHT CONTROL SENSOR SUB-ASSY REAR RH (See page 65-33)
19. TEMPORARILY TIGHTEN STRUT ROD ASSY REAR (See page 27-18)

C91813
C82996
C82997
- REAR SUSPENSIONREAR SUSPENSION ARM ASSY NO.1 LH
27-13
2395 Author
: Date
:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
20. STABILIZE SUSPENSION
(a) Jack up the rear axle carrier, placing a wooden block be-
tween them. Apply load to the suspension so that the
installed bolt of the suspension arm assy No. 1 (vehicle
side) is horizontally aligned with the center of the rear axle
hub.
21. FULLY TIGHTEN REAR SUSPENSION ARM ASSY
NO.1 LH
(a) Fully tighten the bolt.
Torque: 100 NVm (1,020 kgfVcm, 74 ftVlbf)
HINT:
While fixing the nut, turn the bolt.
22. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Fully tighten the RH side by the procedures with the LH side.
23. FULLY TIGHTEN REAR SUSPENSION ARM ASSY
NO.2 LH
(a) Fully tighten the bolt.
Torque: 100 NVm (1,020 kgfVcm, 74 ftVlbf)
HINT:
While fixing the nut, turn the bolt.
24. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Fully tighten the RH side by the procedures with the LH side.
25. FULLY TIGHTEN STRUT ROD ASSY REAR (See page 27-18)
26. INSTALL STABILIZER BAR REAR (See page 27-16)
27. INSTALL EXHAUST PIPE ASSY CENTER (See page 15-2)
28. INSTALL REAR WHEEL
Torque: 103 NVm (1,050 kgfVcm, 76 ftVlbf)
29. INSPECT REAR WHEEL ALIGNMENT (See page 27-3)
30. HEADLIGHT AIM ONLY (See page 65-15)

2706I-02
C82992
C82993
C82992
27-14
- REAR SUSPENSIONREAR SUSPENSION ARM ASSY NO.2 LH
2396 Author
: Date
:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
REAR SUSPENSION ARM ASSY NO.2 LH
REPLACEMENT
HINT:
COMPONENTS: See page 27-2
1. REMOVE REAR WHEEL
2. REMOVE EXHAUST PIPE ASSY CENTER (See page 15-2)
3. REMOVE STABILIZER BAR REAR (See page 27-16)
4. SEPARATE STRUT ROD ASSY REAR (See page 27-18)
5. SEPARATE HEIGHT CONTROL SENSOR SUB-ASSY REAR RH (See page 65-33)
6. SEPARATE REAR SUSPENSION ARM ASSY NO.2 LH (See page 27-10)
7. SEPARATE REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Separate the RH side by the procedures with the LH side.
8. SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH (See page 27-10)
9. SEPARATE REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Separate the RH side by the procedures with the LH side.
10. REMOVE REAR SUSPENSION MEMBER SUB-ASSY (See page 27-10)
11. REMOVE REAR SUSPENSION ARM ASSY NO.2 LH
(a) Remove the bolt and rear suspension arm No. 2 (inner
side).
(b) Remove the bolt, nut and disconnect the rear suspension
arm No. 2 (outer side) from rear axle carrier.
HINT:
Keep the nut fixed while loosening and removing the bolt.
12. INSTALL REAR SUSPENSION ARM ASSY NO.2 LH
(a) Install the rear suspension arm No. 2 (inner side) with the
bolt and temporarily tighten the bolt.

B53747
38 mm (1.5 in.)
- REAR SUSPENSIONREAR SUSPENSION ARM ASSY NO.2 LH
27-15
2397 Author
: Date
:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
(b) Set the suspension arm in the position in the illustration
and fully tighten the bolt.
Torque: 100 NVm (1,020 kgfVcm, 74 ftVlbf)
13. INSTALL REAR SUSPENSION MEMBER SUB-ASSY (See page 27-10)
14. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 LH (See page 27-10)
15. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
16. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 LH (See page 27-10)
17. TEMPORARILY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
18. TEMPORARILY TIGHTEN STRUT ROD ASSY REAR (See page 27-18)
19. CONNECT HEIGHT CONTROL SENSOR SUB-ASSY REAR RH (See page 65-33)
20. STABILIZE SUSPENSION (See page 27-10)
21. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 LH (See page 27-10)
22. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Fully tighten the RH side by the procedures with the LH side.
23. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 LH (See page 27-10)
24. FULLY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Fully tighten the RH side by the procedures with the LH side.
25. FULLY TIGHTEN STRUT ROD ASSY REAR (See page 27-18)
26. INSTALL STABILIZER BAR REAR (See page 27-16)
27. INSTALL EXHAUST PIPE ASSY CENTER (See page 15-2)
28. INSTALL REAR WHEEL
Torque: 103 NVm (1,050 kgfVcm, 76 ftVlbf)
29. INSPECT REAR WHEEL ALIGNMENT (See page 27-3)
30. HEADLIGHT AIM ONLY (See page 65-15)

2706J-02
B53739
B53740
B53741
B53741
27-18
- REAR SUSPENSIONSTRUT ROD ASSY REAR
2400 Author
: Date
:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
STRUT ROD ASSY REAR
REPLACEMENT
HINT:
COMPONENTS: See page 27-2
1. REMOVE REAR WHEEL
2. REMOVE STRUT ROD ASSY REAR
(a) Remove the bolt, nut and disconnect the parking brake
cable.
(b) Remove the bolt, nut and disconnect the strut rod (front
side).
HINT:
Keep the nut fixed while loosening and removing the bolt.
(c) Remove the bolt, nut and strut rod from rear axle carrier.
HINT:
Keep the nut fixed while loosening and removing the bolt.
3. TEMPORARILY TIGHTEN STRUT ROD ASSY REAR
(a) Install the strut rod (rear side), bolt nut and temporarily
tighten the bolt.
HINT:

Insert the bolt from the inner side of the vehicle and tem-
porarily install the bolt.

While fixing the nut, turn the bolt.

B53740
B53741
B53739
- REAR SUSPENSIONSTRUT ROD ASSY REAR
27-19
2401 Author
: Date
:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
(b) Connect the strut rod (inner side) with the bolt.
Torque: 113 NVm (1,150 kgfVcm, 83 ftVlbf)
HINT:
While fixing the nut, turn the bolt.
4. STABILIZE SUSPENSION (See page 27-10)
5. FULLY TIGHTEN STRUT ROD ASSY REAR
(a) Fully tighten the bolt.
Torque: 113 NVm (1,152 kgfVcm, 83 ftVlbf)
HINT:
While fixing the nut, turn the bolt.
(b) Install the parking brake cable with the bolt and nut.
Torque: 5.4 NVm (55 kgfVcm, 48 in.Vlbf)
6. INSTALL REAR WHEEL
Torque: 103 NVm (1,050 kgfVcm, 76 ftVlbf)
7. INSPECT REAR WHEEL ALIGNMENT (See page 27-3)