2005 JAGUAR S TYPE differential

Refer to the front of this book for detailed information and illustrations regarding the location and identification of harnesses, relays, fuses, grounds,
control modules and control module pins.
NOTE: The values listed are approximately those that can be expected at the control module connector pins with all circuit conn
ections made and all
components connected and fitted. The following abbreviations are used to represent values for Control Module Pin-Out data
I Input
O Output
B+ Battery Voltage PG Power Ground
SS Sensor / Signal Supply V
SG Sensor / Signal GroundC CAN Network
S SCP Network
D2 D2B Network D Serial and Encoded Data
V Voltage (DC)
PWM Pulse Width Modulated
CAUTION: The information on this data page is furnished to ai d the user in understanding circuit operation. THIS INFORMATION SH OULD BE USED FOR
REFERENCE ONLY.DATE OF ISSUE: May 2004
Fig. 03.7
FOR CONTROL MODULE PIN-OUT INFORMATION, UNFOLD PAGE TO LEFT. COMPONENTS
Component Connector(s) Connector Description LocationACT SENSOR C69 2-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
APP SENSOR CA88 6-WAY / BLACK TOP OF ACCELERATOR PEDAL
BRAKE ON / OFF SWITCH CA37 2-WAY / BLACK TOP OF BRAKE PEDAL
CKP SENSOR C77 3-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
CMP SENSOR C25 3-WAY / GREY REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
ECT SENSOR C34 2-WAY / GREY REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
EFT SENSOR C35 2-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
EGR VALVE 1 C70 6-WAY / GREY REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
EGR VALVE 2 C71 6-WAY / GREY REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
EOT SENSOR C28 3-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
FRP SENSOR C30 3-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
INLET PORT DEACTIVATION SOLENOID C36 4-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
KNOCK SENSOR 1 C87 2-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
KNOCK SENSOR 2 C88 2-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
MAF SENSOR 1 FH14 4-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
MAF SENSOR 2 FH15 4-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
MAP SENSOR C31 3-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
POWERTRAIN CONTROL MODULE C98 48-WAY / BROWN FRONT BULKHEAD, PASSENGER SIDE C99 48-WAY / GREY
FH13 48-WAY / BLACK
ROTARY ELECTRONIC ACTUATOR 1 C40 5-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
ROTARY ELECTRONIC ACTUATOR 2 C41 5-WAY / BLACK REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33
EGR THROTTLE BODY C39 6-WAY / GREY REFER TO SENSORS AND ACTUATORS, PAGE 32 OR 33HARNESS IN-LINE CONNECTORS
Connector Connector Description / Location LocationFC12 14-WAY / GREY / FASCIA HARNESS TO FRONT HARNESS BEHIND INSTRUMENT PANEL, PASSENGER SIDE
FC26 16-WAY / BLUE / CABIN HARNESS TO FASCIA HARNESS BEHIND INSTRUMENT PANEL, DRIVER SIDE
PI41 42-WAY / BLACK / ENGINE HARNESS TO VEHICLE HARNESSES ENGINE COMPARTMENT, BULKHEAD, PASSENGER SIDEGROUNDS
Ground LocationFH4 ENGINE COMPARTMENT, REARWARD OF RH WHEEL ARCH
NOTE: SG* indicates shared-signal grounds, (sharing sensors shown in parentheses).
NOTE: Refer to the Appendix at the rear of this book for Network Messages. Powertrain Control Module Pin Description and CharacteristicC C98–A3 CAN +
C C98–A4 CAN –
I C98–C4 KNOCK SENSOR 2 SIGNAL: DIFFERENTIAL –ve. VOLTAGE DEPENDENT ON ENGINE VIBRATION
I C98–D1 FRP SENSOR SIGNAL, NOMINAL 0 – 5 V: VOLTAGE INCR EASES AS PRESSURE INCREASES
I C98–D3 KNOCK SENSOR 2 SIGNAL: DIFFERENTIAL +ve. VOLTAGE DEPENDENT ON ENGINE VIBRATION
I C98–D4 KNOCK SENSOR 1 SIGNAL: DIFFERENTIAL –ve. VOLTAGE DEPENDENT ON ENGINE VIBRATION
I C98–E1 EGR THROTTLE POSITION SENSOR SIGNAL: NOMINAL 0 – 5 V
I C98–E4 KNOCK SENSOR 1 SIGNAL: DIFFERENTIAL +ve. VOLTAGE DEPENDENT ON ENGINE VIBRATION
I C98–F3 INERTIA SWITCH: NORMALLY CLOSED / OPEN CIRCUIT WHEN ACTIVATED
O C98–H3 ROTARY ELECTRONIC ACTUATOR 1, VARIABLE VANE TURBO: PWM, 300 Hz
O C98–H4 ROTARY ELECTRONIC ACTUATOR 2, VARIABLE VANE TURBO: PWM, 300 Hz
O C98–K4 INLET PORT DEACTIVATION SOLENOID: PWM, 250 Hz
SG C98–C3 CAN SHIELD: GROUND
SG C98–E2 FRP SENSOR GROUND: GROUND
SG C98–F2 EGR THROTTLE POSITION SENSOR GROUND: GROUND
SS C98–D2 FRP SENSOR POWER SUPPLY: NOMINAL 5 V
SS C98–F1 EGR THROTTLE POSITION SENSOR POWER SUPPLY: NOMINAL 5 V
I C99–A2 EGR VALVE POSITION SENSOR 2: NOMINAL 0 – 5 V
I C99–A3 EGR VALVE POSITION SENSOR 1: NOMINAL 0 – 5 V
I C99–B1 ACT SENSOR SIGNAL: NOMINAL 0 – 5 V: NTC SENSOR – VOLTAGE DECR EASES AS TEMPERATURE INCREASES
I C99–B2 EFT SENSOR SIGNAL, NOMINAL 0 – 5 V: NTC SENSOR – VOLTAGE DECRE ASES AS TEMPERATURE INCREASES
I C99–C1 MAP SENSOR SIGNAL, NOMINAL 0 – 5 V: VOLTAGE INCR EASES AS MANIFOLD ABSOLUTE PRESSURE INCREASES
I C99–C2 ECT SENSOR SIGNAL, NOMINAL 0 – 5 V: NTC SENSOR – VOLTAGE DECR EASES AS TEMPERATURE INCREASES
I C99–E1 EOT SENSOR SIGNAL, NOMINAL 0 – 5 V: NTC SENSOR – VOLTAGE DECRE ASES AS TEMPERATURE INCREASES
I C99–F1 CKP SENSOR SIGNAL: PULSED SIGNAL, 70 PUL SES PER ENGINE CYCLE
I C99–F2 GENERATOR FAULT; CHARGE WARNING
I C99–G4 CMP SENSOR SIGNAL: PULSED SIGNAL, 4 PULSES PER ENGINE CYCLE
O C99–H1 EGR VALVE 1: +ve PWM
O C99–H2 EGR VALVE 1: –ve PWM
O C99–J1 EGR VALVE 2: +ve PWM
O C99–J4 EGR THROTTLE MOTOR DRIVE: +ve PWM
O C99–K1 EGR VALVE 2: –ve PWM
O C99–K4 EGR THROTTLE MOTOR DRIVE: –ve PWM
SG C99–G2 CKP SENSOR SIGNAL GROUND: GROUND
SG C99–H3 CMP SENSOR GROUND: GROUND
SG* C99–D2 EGR VALVE POSITION SENSOR 1 GROUND (EOT SENSOR): GROUND
SG* C99–D2 EOT SENSOR GROUND (EGR VALVE POSITION SENSOR 1): GROUND
SG* C99–E2 ECT SENSOR GROUND (MAP SENSOR): GROUND
SG* C99–E2 MAP SENSOR GROUND (ECT SENSOR): GROUND
SG* C99–G3 ACT SENSOR GROUND (EGR VALVE 2, EFT SENSOR): GROUND
SG* C99–G3 EGR VALVE POSITION SENSOR 2 GROUND (ACT SENSOR, EFT SENSOR): GROUND
SG* C99–G3 EFT SENSOR GROUND (ACT SENSOR, EGR VALVE POSITION SENSOR 2): GROUND
SS C99–C3 EGR VALVE POSITION SENSORS POWER SUPPLY: NOMINAL 5 V
SS C99–C3 EOT SENSOR POWER SUPPLY: NOMINAL 5 V
SS C99–D1 MAP SENSOR POWER SUPPLY: NOMINAL 5 V
SS C99–G1 CKP SENSOR POWER SUPPLY: NOMINAL 5 V
SS C99–H4 CMP SENSOR POWER SUPPLY: NOMINAL 5 V
SG FH13–A2 APP SENSOR SHIELD: GROUND
O FH13–B1 STARTER RELAY DRIVE: TO ACTIVATE, PCM SWITCHES CIRCUIT TO GROUND
SG FH13–B2 APP SENSOR 2 GROUND: GROUND
I FH13–B4 SPEED CONTROL SWITCHES SIGNAL GROUND: GROUND
SG FH13–C1 APP SENSOR 1 GROUND: GROUND
I FH13–C2 APP SENSOR 2 SIGNAL: NEGATIVE-GOING VOLTAGE SLOPE, TYPICAL IDLE VOLTAGE = 3. 445V TO 3.305V; TYPICAL FULL PEDAL VOLTAGE = 2.05 V
SS FH13–C4 SPEED CONTROL SWITCH REQUEST: STEPPED RESISTANCE
I FH13–D1 APP SENSOR 1 SIGNAL: POSITIVE-GOING VOLTAGE SLOPE, TYPICAL IDLE VOLTAGE = 0.61V TO 0.89V; TYPICAL FULL PEDAL VOLTAGE = 3 .4 V
SS FH13–D2 APP SENSOR 2 POWER SUPPLY: NOMINAL 5 V
I FH13–D4 AUTOMATIC – PARK / NEUTRAL SIGNAL: B+ WHEN ACTIVATED
SS FH13–E1 APP SENSOR 1 POWER SUPPLY: NOMINAL 5 V
I FH13–E3 BRAKE CANCEL SWITCH: NORMALLY CLOSED / GROUND WHEN ACTIVATED
I FH13–F1 IAT SENSOR (INTEGRAL TO MAF SENSOR) SIGNAL, NOMINAL 0 – 5 V: NTC SENSOR – VOLTAGE DECREASES AS TEMPERATURE INCREASES
I FH13–F3 ENGINE CRANK: B+
I FH13–F4 MAF SENSOR 1 SIGNAL: TIME PERIOD (FREQUENCY) SIGNAL, PROPORTIONAL TO AIR FLOW
I FH13–G2 BRAKE ON / OFF SWITCH: NORMALLY OPEN / B+ WHEN ACTIVATED
I FH13–G4 MAF SENSOR 2 SIGNAL: TIME PERIOD (FREQUENCY) SIGNAL, PROPORTIONAL TO AIR FLOW
O FH13–J3 EMS CONTROL RELAY DRIVE: TO ACTIVATE, PCM SWITCHES CIRCUIT TO GROUND
O FH13–K2 COOLING FAN MODULE CONTROL: PWM, 140 Hz, POSITIVE DUTY CYCLE RANGE 7% – 95%
B+ FH13–K3 IGNITION SWITCHED POWER (RUN): PJB, F4, 5A
B+ FH13–K4 BATTERY POWER SUPPLY: B+
B+ FH13–L1 EMS SWITCHED POWER SUPPLY 1: FPDB, F20, 30A
B+ FH13–L2 EMS SWITCHED POWER SUPPLY 2: FPDB, F20, 30A
B+ FH13–L3 EMS SWITCHED POWER SUPPLY 3: FPDB, F20, 30A
SG FH13–L4 MAF (INTEGRAL IAT) SENSORS GROUND: GROUND
PG FH13–M1 POWER GROUND: GROUND
PG FH13–M2 POWER GROUND: GROUND
PG FH13–M3 POWER GROUND: GROUND
PG FH13–M4 POWER GROUND: GROUND