2005 HYUNDAI GX350 L Owners Manual

1
FEATURES OF YOUR HYUNDAI
5
B040C03L
UNLOCK
LOCK
HXG018 B040B01A-AAT
Locking and unlocking front doors with a
key
B040C02Y-AATLocking From the OutsideThe doors can be locked without a key. To lock
the doors, first push the inside lock switch to the
"LOCK" position so that the red mark on the
switch is not visible, then close the door.
The door will not lock if the key is left in the ignition
switch when the front doors close. This is
normal.NOTE:o When locking the door this way, be care-
ful not to lock the door with the ignition
key left in the vehicle.
o To prevent against theft, always remove
the ignition key, close all windows, and
lock all doors and the trunk lid when
leaving your vehicle unattended.
B040D02S-AATLocking From the Insideo To lock the doors from the inside, simply
close the door and push the lock switch to the
"LOCK" position. When this is done, neither
the outside nor the passenger's inside door
handle can be used.
o The driver's door can be opened by pulling
the inside door handle even if the lock switch
is depressed.NOTE:When the door is locked, the red mark on the
switch is not visible. o The door can be locked or unlocked with a
key.
o Lock the door by turning the key toward the
front of the vehicle and unlock it by turning the
key toward the rear.
HXGS226LOCK UNLOCK
xgflhma-1.p656/16/04, 3:02 PM 5
ProCarManuals.com

1FEATURES OF YOUR HYUNDAI6
KEYLESS ENTRY SYSTEM
CENTRAL DOOR LOCKSB040G02L-AATThe central door locking switch is located on the
driver's arm rest. It is operated by depressing
either the front or rear of the door lock switch.NOTE:o When pushing the front portion of the
driver's door lock switch, all vehicle doors
will lock.
If any door is open when the switch is
depressed, the door will remain locked
when closed.
o When pushing the rear portion of the
switch, all vehicle doors will unlock.
B040G02L-1
LOCK
UNLOCK
B070F01L-AATLocking doors1. Close all doors.
2. Push the " " button on the transmitter.
3. All doors will lock and the turn signal lights will
blink once to indicate that the system is
armed.Unlocking doors1. Push the " " button on the transmitter.
2. All doors will unlock and the turn signal lights
will blink twice to indicate that the system is
disarmed.Releasing the trunk lidPush the " " button on the transmitter for
longer than 1 second.
B040E04A-AATCHILD-PROTECTOR REAR DOOR LOCKYour Hyundai is equipped with a "child-protec-
tor" rear door lock assembly. When the lock
mechanism is engaged, the rear door cannot be
opened from the inside. Its use is recommended
whenever there are small children in the rear
seat.
To engage the child-protector feature so the
door cannot be opened from the inside, move
the child-protector lever to the " " position and
close the door. Move the lever to the " "
position when normal door operation is desired.
If you wish to be able to open the door from the
outside, the outside door handle will function
normally.
B040E03L
xgflhma-1.p656/16/04, 3:02 PM 6
ProCarManuals.com

1
FEATURES OF YOUR HYUNDAI
7
THEFT-ALARM SYSTEMB070A01S-AAT(If Installed)This system is designed to provide protection
from unauthorized entry into the car. This sys-
tem is operated in three stages : the first is the
"Armed" stage, the second is the "Alarm" stage,
and the third is the "Disarmed" stage. If trig-
gered, the system provides an audible alarm.B070B03Y-AATArmed StagePark the car and stop the engine. Arm the
system as described below.
1) Remove the ignition key from the ignition
switch.
2) Make sure that the engine hood and trunk lid
are locked.
3) Lock the doors using the transmitter of the
keyless entry system.
After completion of the steps above, the turn
signal light will blink once to indicate that the
system is armed.NOTE:1) If any door, trunk lid or engine hood
remains open, the system will not be
armed.
2) If this happens, rearm the system as
described above.
CAUTION:
Do not arm the system until all passengers
have left the car. If the system is armed while
a passenger(s) remains in the car, the alarm
may be activated when the remaining
passenger(s) leaves the car.B070C03L-GATAlarm StageThe alarm will be activated if any of the following
occurs while the car is parked and the system
is armed.
HXGS123
!
CAUTION:
Avoid trying to start the engine while the
system is armed.
!
1) A front or rear door is opened without using
the transmitter.
2) The trunk lid is opened without using the
transmitter.
3) The engine hood is opened.
The turn signal lights will blink continuously and
the siren will sound for 27 seconds. (EC only/
Except E.C: This happens 3 times). To turn off
the system, unlock the door or trunk lid with the
transmitter.
xgflhma-1.p656/16/04, 3:02 PM 7
ProCarManuals.com

1FEATURES OF YOUR HYUNDAI8
B070E02HP-GATReplacing the batteryWhen the transmitter's battery begins to get
weak, it may take several pushes on the button
to lock or unlock the doors, and the LED will not
light. Replace the battery as soon as possible.
Battery type : CR2032
Replacement instructions:
1. Carefully separate the case with a blade
screwdriver as shown in the illustration.
HEF-192A
Screwdriver
CAUTION:
Only the transmitter can disarm the armed
stage. If the transmitter does not disarm the
system, it is necessary to take the following
steps;
1. Unlock the door with the key, which will
cause the alarm to be activated.
2. Insert the key in the ignition key cylinder
and turn the ignition key to "ON" posi-
tion.
3. Wait for 30 seconds.
After completing the steps above, the sys-
tem will be disarmed.
!
HXG117
UNLOCK
LOCK
TRUNK
B070D04L-AATDisarmed StageThe system will be disarmed when the following
step is taken:
The driver's or passenger's door is unlocked by
depressing the " " button on the transmitter.
After completion of the steps above, the turn
signal lights will blink twice to indicate that the
system is disarmed.
xgflhma-1.p656/16/04, 3:02 PM 8
ProCarManuals.com

1
FEATURES OF YOUR HYUNDAI
9
2. Remove the old battery from the case and
note the polarity. Make sure the polarity of
the new battery is the same(+side facing
down), then insert it in the transmitter.
HEF-193
Battery
POWER WINDOWSB060A03Y-AATThe power windows operate when the ignition
key is in the "ON" position. The main switches
are located on the driver's armrest and control
the front and rear windows on both sides of the
vehicle. The windows may be opened by de-
pressing the appropriate window switch and
closed by pulling up the switch. To open the
window on the driver's side, press the switch(1)
halfway down. The window moves as long as
the switch is operated. To fully open the driver's
window automatically, press the switch fully
down. In automatic operation, the window will
fully open even if you let go of the switch. To stop
at the desired opening, pull up and release the
switch.In order to prevent operation of the passanger
front and rear windows, a window lock switch(2)
is provided on the armrest of the driver's door.
To disable the power windows, press the win-
dow lock switch. To return to normal operation,
press the window lock switch a second time.
NOTE:The power windows can be operated for 30
seconds after the ignition key is turned to
the "ACC" or "LOCK" positions, or removed
from the ignition switch.
If the front doors are opened during this 30
second period, the power windows can no
longer be operated without the ignition key
turned to the "ON" position.
HXG129-1
OpenClose
HXG025-1
(1)
(2)
xgflhma-1.p656/16/04, 3:02 PM 9
ProCarManuals.com

1FEATURES OF YOUR HYUNDAI10
SEATS!
B080A01A-AATADJUSTABLE FRONT SEATS
WARNING:Never attempt to adjust the seat while the
vehicle is moving. This could result in loss
of control or an accident which may cause
death, serious injury, or property damage.
B080B01L-AATAdjusting Seat Forward and RearwardTo move the seat toward the front or rear, pull
the lock release lever upward. This will release
the seat on its track so you can move it forward
or rearward to the desired position. When you
find the position you want, release the lever and
slide the seat forward or rearward on its track
until it locks into the desired position and cannot
be moved further.
HXG179
!
WARNING:
To ensure the seat is locked securely, at-
tempt to move the seat forward or rearward
without using the control knob.
!
WARNING:
(1) Be careful that someone's head, hands
and body are not trapped by a closing
window.
(2) Never try to operate the main switch on
the driver's door and the individual door
window switch in opposing directions
at the same time. If this is done, the
window will stop and cannot be opened
or closed.
(3) Do not leave children alone in the car.
Always remove the ignition key for their
safety.
HXG029
Close
Open
xgflhma-1.p656/16/04, 3:02 PM 10
ProCarManuals.com

1
FEATURES OF YOUR HYUNDAI
11
!
HXG103 B080C02A-AAT
Adjusting Seatback AngleTo recline the seatback, lean forward to take
your weight off it, then pull up on the recliner
control lever at the outside edge of the seat. Now
lean back until the desired seatback angle is
achieved. To lock the seatback into position,
release the recliner control lever.
WARNING:
To minimize risk of severe injury in the
event of a collision or a sudden stop, both
the driver and passenger seatbacks should
always be in an upright position while the
vehicle is in motion. The protection pro-
vided by the seat belts and airbags in a
frontal collision may be reduced signifi-
cantly when the seatbacks are reclined.
There is greater risk that the driver and
passenger will slide under the seat belt
which may result in serious injury if a crash
occurs when the seatbacks are reclined.
The seat belt and airbags cannot provide
proper protection to an occupant if the seat
back is reclined.
B080D01L-GATAdjustable HeadrestsHeadrests are designed to help reduce the risk
of neck injuries.
To raise the headrest, pull it up. To lower it, push
it down while pressing the lock knob. If equipped
with a horizontally adjustable type of headrest,
pull on the top.
HXG200J
Lock Knob
xgflhma-1.p656/16/04, 3:02 PM 11
ProCarManuals.com

1FEATURES OF YOUR HYUNDAI12
B090C01Y-AATSeat Cushion Height Adjustment
(Driver's Seat Only)Move the front portion of the control knob up or
down to raise or lower the front part of the seat
cushion. Move the rear portion of the control
knob up or down to raise or lower the rear part
of the seat cushion.
HXG106
!
WARNING:
o For maximum effectiveness in case of an
accident the headrest should be ad-
justed so the top of the headrest is at the
same height as the top of the occupant's
ears. For this reason, the use of a cush-
ion that holds the body away from the
seatback should not be recommended.
o Do not operate vehicle with the head-
rests removed as injury to the occupants
may occur in the event of an accident.
Headrests may provide protection
against neck injuries when properly ad-
justed.
B080G01LB080E01L-AAT
Lumbar Support ControlTo adjust the lumbar support, turn the handle on
the outboard or left side of the seat. To increase
the amount of lumbar support, pull the lever
forward. To decrease it, push the lever toward
the rear.
1. Minimum support
2. Maximum support
HXG108
2 1
xgflhma-1.p656/16/04, 3:02 PM 12
ProCarManuals.com