2005 Acura RL display

ÝÛ
Ý
With the ignition switch in the ON
(II) position, the upper part of the
display changes, as shown in the
illustration, each time you press thebutton. If you press the button,
the display returns to the previous
message.
Multi-Inf ormation Display
72
U.S. CANADA If ON
Press button
Press button

Along with the trip meter, the trip
computer calculates these values:Range is the estimated distance you
cantravelonthefuelremainingin
the tank. This distance is estimated
f rom the f uel economy you received
over the last several miles, so it will
vary with changes in speed, traf f ic,
etc.
When you turn the ignition switch to
the LOCK (0) position, ELAPSED
TIME is reset.
When Trip A is reset, average f uel
economy A is reset at the same time.
When Trip B is reset, average f uel
economy B is reset at the same time. Instant Fuel Economy
Range
Average Vehicle Speed Elapsed Time
Average Fuel Economy
Trip Computer
Multi-Inf ormation Display
Inst rument s and Cont rols
73

This monitor shows how much
torque is being delivered to each
wheel. For more inf ormation, see
page .Whenthetirepressuremonitoris
shown on the multi-inf ormation
display, press the SEL/RESET
button. The display changes as
shown.
You can see the pressure of each tire
in this monitor. If one or more tires
are low, inflate them to the correct
pressure. For more inf ormation, see
page .
277
272
Multi-Inf ormation Display
SH-AWD T orque Distribution
Monitor Tire Pressure Monitor
74
U.S.
Canada

You can receive or make phone calls
f rom your cell phone through your
Acura’s HandsFreeLink (HFL)
system without touching your cell
phone.When the engine oil lif e reaches 15
percent, the display shows
‘‘SERVICE DUE SOON’’ and the
code f or the maintenance items to be
perf ormed.
When the engine oil lif e reaches 5
percent, the display shows
‘‘SERVICE DUE NOW’’ along with
the same maintenance items.Have your dealer do the indicated
maintenance as soon as you see this
message, and have them reset the
display af ter completing the service.
If you do not perf orm the indicated
maintenance or do not reset the
display, the message changes to
‘‘SERVICE PAST DUE’’ when the
engine oil lif e becomes 0 percent.
These messages appear on the multi-
inf ormation display each time you
turn the ignition switch to ON (II).
For details on engine oil lif e and
maintenance messages, ref er to page
.
Also ref er to page f or important
maintenance saf ety precautions.
To use the system, your cell phone
and the HFL system must be linked.
Not all cell phones are compatible
with this system. Ref er to page
for instructions on how to link
your cell phone to the HFL and how
to receive or make phone calls. 291
290
230
HandsFreeL ink
Maintenance Messages
Multi-Inf ormation Display
Inst rument s and Cont rols
75
TM

When a problem is detected with
your vehicle, a message will be
shown on the multi-inf ormation
display.
If this happens, refer to the
applicable pages of this owner’s
manual, and f ollow the instructions.
Here is a list of messages shown on
the multi-information display. When there are several messages to
be shown, the system switches the
messages every 5 seconds.
The message is shown until you
push the INFO button.
To see the message again, press the
INFO button, 5 seconds af ter the
display disappears.See page
61, 350
See page 350
See page 60, 348
See page 60, 349
See page 60, 348
See page 264
See page 347 See page
62, 275
See page 63, 281
See page 67, 107
See page 66
See page 65, 272
See page 265
See page 32, 61
Multi-Inf ormation Display
Message Display
76

See page106
See page 33, 61
See page 139
See page 138
See page 139
See page 310 See page
279
See page 65, 279
See page 13
See page 60
See page 250
See page 64
See page 291
See page
280
Multi-Inf ormation Display
Inst rument s and Cont rols
77
U.S.
Canada

ÛÝ
µ™´
µ™´¶
¶
With the multi-information display
and the , , and SEL/RESET
buttons on the right side of the
steering wheel, you can change
several vehicle control settings to
your pref erence (see page ).
To change the settings, the ignition
switch must be in the ON (II)
position.
Here are the settings you can
change: 81
CUST OMIZE MENU
ENGLISH
FRENCH
SPANISH5°F 5°F
3°C 3°C
ON
OFF
ON
OFF
ON
OFF
ALL DOORS
ON
OFF
ON
OFF
60 SEC
30 SEC
15 SEC
60 SEC
30 SEC
See page
83
See page
83
See page
84
See page
86
See page
86
See page
89
See page
89
See page
90
See page
92
See page
92
LANGUAGE
SELECTION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP A & AVG. FUEL A
RESET with REFUEL
EXIT
MEMORY POSIT ION
LINK
AUTO TILT &
TELESCOPIC
EXIT
DOOR UNLOCK MODE
KEYLESS ACCESS
LIGHT FLASH
KEYLESS ACCESS
BEEP
EXIT
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT AUT O
OFF TIMER
MET ER SET UP
POSITION SETUP
KEYLESS ACCESS
SETUP
LIGHTING SETUP
DEFAULT
ENGLISH
0°F
0°C
OFF
ON
ON
ON
ON
30 SEC
15 SECCUST OMIZE SET UP
DRIVER DOOR ONLY
CUST OMIZE GROUP
DRIVER
DOOR ONLY
Multi-Inf ormation Display
Customized Settings
78

If you turn the ignition switch to
ACCESSORY (I) or LOCK (0), or
move the shift lever out of Park, the
display will change to the normal
screen.
To have the driver’s ID detected,
make sure your remote is linked to
the system (seeon page ). Then use your
remote to unlock the doors (see on page ).
When the ignition switch is in the
ON (II) position, the multi-
inf ormation display shows the driver’s
ID.
You cannot customize the setting; When the keyless memory
settings are of f (see page ).
When you disconnect the vehicle
battery, and then do not unlock
the door.
When the multi-information
display does not show the driver’s
ID. 86
88
167CUST OMIZE MENU 15 SEC
0SEC
MAX
HIGH
MID
LOW
MIN
SHIFT FROM P
WITH VEH SPD
OFF
SHIFT TO P
IGN OFF
OFF
DRIVER DOOR
ALL DOORS
ON
OFF
90 SEC
60 SEC
30 SEC
INTERMITTENT
WITH VEH SPDDEFAULT
15 SEC
MID
WITH VEH
SPD
SHIFT TO
P
DRIVER
DOOR
ON
30 SEC
WITH VEH
SPD
See page
92
See page
93
See page
95
See page
96
See page
97
See page
97
See page
98
See page
100
LIGHTING SETUP
DOOR/WINDOW
SETUP
WIPER SETUP
HEADLIGHT AUT O
OFF TIMER
AUTO LIGHT
SENSITIVITY
EXIT
AUTO DOOR LOCK
AUTO DOOR UNLOCK
DOOR LOCK MODE
SECURITY RELOCK
TIMER
EXIT
WIPER ACTION
EXIT
EXITCUST OMIZE SET UP
CUST OMIZE GROUP
KEYLESS LOCK
ACKNOWLEDGMENT
Multi-Inf ormation Display
Memory Position
Link
K eyless A ccess Setup
Inst rument s and Cont rols
79