2005 Acura RL display

If you want the settings as they were
when the vehicle lef t the f actory,
press the INFO button for more than
3 seconds then release it. The
CUSTOMIZE ENTRY screen will be
shown.
Select DEFAULT ALL, and press
the SEL/RESET button.Select SET, and press the SEL/
RESET button.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen appears.
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE ENTRY screen
appears again.If the message shown above appears
on the multi-information display
while you are customizing the
settings, this message lets you know
the setting has not changed.
Multi-Inf ormation Display
Setting to Def ault
Setting Incomplete
80
Press the SET/RESET buton.

Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration. Select
which of these customize groups you
want to change:
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again. WIPER SET UP DOOR/WINDOW SET UP
LIGHTING SET UP
KEYLESS ACCESS SET UP
POSITION SET UP
METER SET UP
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Multi-Inf ormation Display
Selecting a Customize Group
Inst rument s and Cont rols
81
Press the or button.
Press the SEL/RESET button. TO METER
SET UP
seepage82
TO POSITION
SET UP
seepage85
TO KEYLESS
ACCESS SET UP
seepage88
TO LIGHTING
SET UP
seepage91
TO DOOR/
WINDOW SET UP
seepage94
TO WIPER
SET UP
seepage99

Û
Ý
ÛÝ
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode: LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
TRIP A & AVG. FUEL A RESET
with REFUEL
If you select EXIT by pressing the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again. With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select METER SET UP, and press
the SEL/RESET button.
Multi-Inf ormation Display
Meter Setup
82
Press the or button.
Press the SEL/RESET button.

µµÛÝ
ÛÝ
Language Selection
Adjust Outside Temp. Display
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
You can adjust the outside
temperature shown on the multi-
inf ormation display in the range of5°F ( 3°C) to 5°F (3°C).
Adjust the temperature by pressing
the or button, and enter your
selection by pressing the SEL/
RESET button.
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
You can select the language shown
on the multi-information display to
English, French, or Spanish.
Select the desired language by
pressing the or button, and
enter your selection by pressing the
SEL/RESET button.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
83

Û
Ý
TripA&AVG.FUELAResetWith
Refuel
The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns. YoucansetwhetherornotTripA
and average fuel economy A are
reset when you ref uel your vehicle.
Select ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button. To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
Multi-Inf ormation Display
84

Û
Ý
ÛÝ
With the ignition switch in the ON
(II) position, press the INFO button
f or more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
inf ormation display.
Select CHG SETTING, and press the
SEL/RESET button.
Select POSITION SET UP, and press
the SEL/RESET button.
Each time you press the INFO ( / ) button, the display changes as
shown in the illustration.
If you select EXIT by pressing the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again. AUTO TILT & TELESCOPIC MEMORY POSITION LINK
Here are the settings you can
customize in this mode:
CONT INUED
Position Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
85
Press the or button.
Press the SEL/RESET button.

Û
ÝMemory Position Link Auto Tilt & TelescopicSelect ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
When you turn the ignition switch to
LOCK (0) and release it, or remove
the built-in key f rom the ignition
switch, the steering wheel
automatically moves f ully in and up.
You can turn this feature on or off.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
When you unlock the doors by
pressing the button on the remote or
by grabbing the driver’s door handle
while carrying the remote, the
driver’s ID (Driver 1 or Driver 2) is
recognized, and the driver’s seat, the
steering wheel, and the outside
mirror positions move to their
memorized positions.
You can turn this feature on or off. The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
Multi-Inf ormation Display
86

Û
Ý
Select ON or OFF by pressing the
or button, and enter your
selection by pressing the SEL/
RESET button.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button. The conf irmation screen is shown
f or 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
Multi-Inf ormation Display
Inst rument s and Cont rols
87