CARBURETOR ASSEMBLY
6-16
CARB
FUEL LEVEL ADJUSTMENT (CARBURE-
TOR INSTALLED
1. Place the motorcycle on a level surface.
2. Make sure that the carburetor is in a horizon- tal position by placing a hydraulic jack under
the engine.
Fuel level gauge: P/N. 90890-01312
4. Loosen drain screw (2) and heat the engine.
5. Measure:
•Fuel level (a)
Out of specification ➔Adjust.
Fuel level: 6.0 ~ 8.0 mm
Under the edge of the carburetor
body.
6. Adjust:
•Fuel level
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
Fuel level adjustment:
•Remove carburetor assembly.
•Inspect valve seat and needle valve set.
•If either of the two is worn, replace both.
•If both are perfect, adjust float height by bend-
ing the wing tab of the float itself (1).
•Recheck the fuel level.
3. Connect the fuel level gauge (1) to the carbu- rettor nipple.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
ProCarManuals.com
