SPECGENERAL SPECIFICATIONS
2-1
SPECIFICATIONS
GENERAL SPECIFICATIONS
Item Standard Limit
ModelTT600RE: 5CH5
Dimensions
Overall length 2,220 mm •••
Overall width 865 mm •••
Overall height 1,195 mm •••
Seat height 890 mm •••
Wheelbase 1,480 mm •••
Ground clearance 280 mm •••
Minimum turning radius 3,300 mm (right)
3,100 mm (left) •••
Basic weight (with oil and full
fuel tank)164.5 kg •••
Engine
Engine type Air cooled 4-stroke, SOHC
Cylinder arrangement Forward inclined single cylinder
Displacement 595 cm
3•••
Bore x stroke 95.0 x 84.0 mm •••
Compression ratio 8.5 : 1 •••
Starting system Electric starter
Lubrication system Dry sump with separate oil tank
Engine oil
Type
Temp. °CSAE20W40SE or SAE10W30SE •••
Recommended engine oil classification API Service SE, SF, SG or higher •••
Quantity:
Without oil filter cartridge
replacement 2.4 L •••
With oil filter cartridge
replacement 2.5 L •••
Total amount (dry engine) 3.0 L •••
Air filterWet type element
Fuel
Type Regular unleaded gasoline
Fuel tank capacity 10 L •••
Fuel reserve amount 3.0 L •••
Carburetor
Manufacturer TEIKEI
Model x quantity Y30PV-2ATK x 1
ProCarManuals.com
INSP
ADJ
SPARK PLUG INSPECTION
3-9
SPARK PLUG INSPECTION
1. Remove:
•Seat
•Fuel tank
See section “SEAT, FUEL TANK AND
REAR COWLING”.
2. Disconnect:
•Spark plug cap
3. Remove:
•Spark plug (1)
Before removing the spark plug, use com-
pressed air to blow away any dirt accumulat-
ed in the spark plug wells to prevent it from
falling into the cylinder.
When removing the spark plug, be careful not
to drop foreign objects inside the engine.
4. Inspect:
•Type of spark plug
Incorrect ➔Replace.
CAUTION:
CAUTION:
Standard spark plug:
DPR8EA-9 (N.G.K.) or DPR9EA-9 (N.G.K.)
5. Inspect:
•Electrodes (1)
Wear and tear/damage ➔Replace.
•Insulator (2)
Normal insulator (2) colour is light tan.
6. Clean the spark plug with a suitable tool and a
steel brush.
7. Measure:
•Spark plug electrode gap (a)
Use a wire or thickness gauge.
Out of specification ➔Regap.
Electrode gap:
0.8 ~ 0.9 mm
1
ProCarManuals.com
