2004 SUBARU IMPREZA lock

11 -6 9
Maintenance and service
– CONTINUED –
!Front turn signal light bulbs
1. Remove the bulb socket from the headlight assem-
bly by turning it counterclockwise. 2. Pull the bulb out of the socket. Install a new bulb.
3. Set the bulb socket into the headlight assembly and
turn it clockwise until it locks.
4. Install the headlight assembly and the front grille in
the reverse order of removal.
UGB536CA
UGB531BA

11 -7 3
Maintenance and service
– CONTINUED –
!Parking light bulbs
1. Remove the bulb socket from the headlight assem-
bly by turning it counterclockwise. 2. Pull the bulb out of the socket. Install a new bulb.
3. Set the bulb socket into the headlight assembly and
turn it clockwise until it locks.
4. Install the headlight assembly and the front grille in
the reverse order of removal. !
Front fog light
It may be difficult to replace the bulbs. Have your SUB-
ARU dealer replace the bulbs if necessary.
UGB535BA
UGB532BA

11 - 7 4
Maintenance and service
!
Rear combination lights
! Sedan
1. Remove the clip from the rear trunk trim with a reg-
ular screwdriver. 1) Backup light
2) Rear turn signal light
3) Brake light
4) Tail light
5) Brake/tail light
2. Open the rear portion of the side trunk trim panel.
3. Remove the bulb holder from the rear combination
light assembly by turning it counterclockwise.
4. Remove the bulb from the socket by pushing it and
turning counterclockwise. Install a new bulb.
5. Set the bulb holder into the rear combination light
assembly and turn it clockwise until it locks.
6. Secure the rear trunk trim panel with the clips.
UGB538BA
554
2
3
1
UGB539BB

11 - 7 6
Maintenance and service
1) Tail/brake light
2) Rear turn signal light
3) Backup light
3. Remove the bulb holder from the rear combination
light assembly by turning it counterclockwise.
4. Remove the bulb from the socket by pushing it and
turning counterclockwise. Install a new bulb.
5. Set the bulb holder into the rear combination light
assembly and turn it clockwise until it locks.
6. Close the cover and latch the lock.
7. Reinstall the rear combination light assembly and
its side cover. !
License plate light
1. Remove the mounting screws using a phillips
screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.
2
1
3
UGB542BB
UGB543BA

11 -7 9
Maintenance and service
– CONTINUED –
!Wagon
1. Remove the mounting screw covers by prying the
edge with a screwdriver.
2. Remove the mounting screws using a phillips
screwdriver and then remove the high mount stop light cover.
3. Remove the bulbs from the socket by pushing it
and turning counterclockwise. Install a new bulb.
4. Reinstall the cover.
5. Tighten the mounting screws then reinstall the cov- ers.
NOTE
Other bulbs may be difficult to replace. Have your SUBARU dealer replace these bulbs if necessary.
HSB091BA

12-6
Specifications
Fuses and circuits !
Fuse panel located behind the coin tray
1
23456
78 9101112
13 14 15
16 17 18 19
20 21 22 23
HSC001BB
Fuse panelFuse ratingCircuit
115A"Heater fan
215A"Heater fan
315A"Power door lock
" Remote keyless entry
420A"Cigarette lighter
" Remote controlled rear
view mirrors
510A"Tail light
" Parking light
615A"SRS airbag
715A"Fog light
820A"ABS solenoid
915A"Radio
10Empty
1115A"Engine ignition system
" SRS airbag
" AT control system

12-8
Specifications
!
Fuse panel located in the engine com-
partment
A) FWD socket (AT models except Turbo)
B) Main fuse
A 12
3 B
4
5 6
78
91011
12
HSC002BB
Fuse panelFuse ratingCircuit
120A"
Radiator cooling fan
(Main)
220A"Radiator cooling fan
(Sub)
330A"ABS motor
420A"Rear window defogger
515A"Hazard warning flasher
" Horn
615A"Turn signal lights
710A"Automatic transmis- sion control unit
810A"Alternator
915A"Headlight (right side)
1015A"Headlight (left side)
1120A"Lighting switch
1215A"Clock
" Interior light

14-2
Index
A
ABS (Anti-lock Brake System)
...............................7-30
Warning light ................................................. 3-23, 7-31
Accessories ......................................................... 5-3, 11-63
Accessory power outlet ...................................6-9, 6-11
Active head restraint .................................................. 1-6
Air cleaner element ..................................................... 11-23
Air conditioner operation ..........................................4-9
Air filtration system ..................................................... 4-20
Air flow selection .......................................................... 4-2
Aluminum wheels ........................................................ 11-53
Ambient temperature gauge .........................3-11, 3-18
Antenna system ........................................................... 5-2
Anti-lock Brake System (ABS) ...............................7-30
Arming the system ...................................................... 2-15
Armrest ............................................................................ 1-9
Ashtray ............................................................................. 6-12
AT OIL TEMPerature warning light ......................3-22
Audio set ......................................................................... 5-3
Auto-dimming mirror /compass .............................3-44
Automatic/Emergency Locking Retractor (A/ELR) ....................................................................... 1-15
Automatic transmission ............................................. 7-21
Capacities ................................................................. 12-4
Fluid ............................................................................ 11-31
Selector lever .......................................................... 7-22
Shift lock release ................................................... 7-26Temperature warning light
.................................3-22
BBattery ............................................................................... 11-58
Jump starting ........................................................... 9-14
Replacement (Remote keyless entry system) .................................................................... 2-9
Brake Booster ....................................................................... 11-40
Fluid ............................................................................. 11-37
Pad and lining .......................................................... 11-42
Pedal ........................................................................... 11-40
Brake system ................................................................. 7-29
Warning light ............................................................ 3-24
Braking .............................................................................. 7-28
Breaking-in of new brake pads and linings .11-43
Tips .............................................................................. 7-28
Brake pedal
Free play .................................................................... 11-40
Reserve distance ................................................... 11-41
Bulb
Chart ............................................................................ 12-9
Replacing ................................................................... 11-64
C
Capacities ........................................................................ 12-4