Page 466 of 2870
SR-2
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
General Description
1. General Description
A: COMPONENT
(1) Sunroof lid (7) Harness (13) Shim
(2) Rear drain ASSY (8) Sunshade
(3) Frame ASSY (9) GarnishTightening torque: N·m (kgf-m, ft-lb)
(4) Motor ASSY (10) Frame bracketT: 7.4 (0.75, 5.4)
(5) Drive unit (11) Cover
(6) Drain tube (12) Deflector
SR-00013
T
T
T
T
(1)
(2)
(3)
(4)(5)
(6)
(7)
(12)(13)
(11)
(6)(10)(8)
(9)
Page 470 of 2870
SR-6
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
Sunroof Assembly
4. Sunroof Assembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove roof trim.
Roof Trim.>
3) Remove sunroof lid.
Sunroof Lid.>
4) Disconnect the four drain tubes (A) from sunroof
frame.
5) Disconnect sunroof harness connector.
6) Remove the bolts, and then remove the frame
bracket.
7) Remove bolts and nuts and then detach sunroof
frame.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful not to snag harness.
NOTE:
Make sure to connect harness connector.
When installing drain tube, insert it securely into
drain pipe.
Length A:
15 mm (0.59 in) or more
C: DISASSEMBLY
1) Remove sunroof frame.
2) Cut the pawl (A) of front sunshade RH.
3) Remove the front slider RH.
4) Pull out the sunshade (B) from sunroof frame.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
SR-00014
SR-00015(A)(A)
SR-00005
A
SR-00006
(A)
SR-00007
Page 485 of 2870
EI-9
EXTERIOR/INTERIOR TRIM
General Description
10.ROOF RAIL
11.DOOR TRIM
(1) Roof railTightening torque: N·m (kgf-m, ft-lb)
T: 7.5 (0.76, 5.53)
(A) Front door trim (B) Rear door trim
(1) Gusset cover (4) Clip (7) Ash tray
(2) Bracket (5) Trim panel
(3) Weather strip upper (6) Power window switch cover
EI-00010
T
(1)
EI-00233 (A)
(1)
(2)(3)(5)
(6)
(2)(3)(5)
(6)
(7)
(4)
(B)
(4)